GB/T 1927.19-2021 English PDFUS$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1927.19-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 19: Determination of static hardness Status: Valid
Basic dataStandard ID: GB/T 1927.19-2021 (GB/T1927.19-2021)Description (Translated English): Test methods for physical and mechanical properties of small clear wood specimens - Part 19: Determination of static hardness Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B68 Word Count Estimation: 8,81 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 1927.19-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 19: Determination of static hardness---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for physical and mechanical properties of small clear wood specimens -- Part 19: Determination of static hardness ICS 79:040 CCSB68 National Standards of People's Republic of China Replacing GB/T 1941-2009 Test method for physical and mechanical properties of wood with small sample without defect Part 19: Determination of hardness (ISO 13061-12:2017, Physical and mechanical properties of wood- 2021-12-31 Released 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 19 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects": GB/T 1927 has been issued The following parts are distributed: --- Part 1: Collection of test materials; --- Part 2: Sampling methods and general requirements; --- Part 3: Determination of growth ring width and latewood rate; --- Part 4: Determination of moisture content; --- Part 5: Density determination; --- Part 6: Determination of dry shrinkage; --- Part 7: Determination of water absorption; --- Part 8: Determination of swelling properties; --- Part 9: Determination of flexural strength; --- Part 10: Determination of flexural modulus of elasticity; --- Part 12: Determination of transverse grain compressive strength; --- Part 17: Determination of impact toughness; --- Part 18: Determination of impact indentation; --- Part 19: Determination of hardness; --- Part 20: Determination of splitting resistance: This document replaces GB/T 1941-2009 "Wood Hardness Test Method": Compared with GB/T 1941-2009, except for structural adjustment and compilation In addition to the editorial changes, the main technical changes are as follows: a) terms and definitions are added (see Chapter 3); b) The principle part clarifies that the hardness is expressed by the resistance during pressing (see Chapter 4, Chapter 3 of the:2009 edition); c) Changed the requirements for sample size (see 6:2, 5:2 of the:2009 edition); d) The requirements for the density measurement equipment for hardness measurement samples are added (see 5:3); e) Added the description and requirements that the moisture content of the sample can be wet wood (see 6:3); f) Deleted "6:1 Before the test, the accuracy of the measurement and display of the indentation depth of the test equipment should be checked:" (See the:2009 edition of 6:1); g) Deleted "6:2 Each specimen shall be tested on two chord surfaces, two radial surfaces and two end surfaces respectively:" (see:2009 version 6:2); h) The requirements for the accuracy of load readings have been changed (see 7:1, 6:3 of the:2009 edition); i) Added the sampling requirements for the samples used for the measurement of moisture content and density after the hardness test (see 7:2); j) Deleted “The average value of the test results of the two chord surfaces, the two radial surfaces and the two end surfaces of the sample is taken as the hardness of each surface of the sample: degrees" (see:2009 edition 7:2); k) Changed the accuracy requirements for hardness results (see 8:1 and 8:2, 7:1 and 7:3 of the:2009 edition); l) Added the specific content of the test result record and report (see Chapter 9); m) The sample size, steel ball depth, density sample, etc: have been added to the wood hardness test record table, and changed from the normative appendix It is an informative appendix (see Appendix A, Appendix A of the:2009 edition): This document is modified to adopt ISO 13061-12:2017 "Test methods for the physical and mechanical properties of wood with flawless small specimens - Part 12: Hardness Measurement": The technical differences between this document and ISO 13061-12:2017 and the main reasons are as follows: a) Normative references, using the corresponding national standards: Because of normative references listed in ISO 13061-12:2017 ISO 3129, ISO 13061-1 and ISO 13061-2 have been adopted by national standards; ISO 13061-12:2017 related inclusions In the vocabulary of ISO 24294, LY/T 1788 has been included: b) Added a schematic diagram of the equipment (see Figure 1): Continue to use the schematic diagram of the:2009 version, which is conducive to understanding the test equipment and operation step: c) The water content correction coefficient of formula (2) is specified as 0:03: The moisture content correction coefficient of the:2009 version of the national standard is used, which is convenient for Conversion of hardness for different moisture contents: d) The method of converting the result to a moisture content of 12% has been deleted from the recording and reporting of test results (see Chapter 9): Because of the ISO standard No correction factor for water cut is given, and this document has made it clear that the correction factor for water cut is 0:03: The following editorial changes have been made to this document: --- In order to harmonize with existing standards, the name of the standard is changed to "Test methods for physical and mechanical properties of wood with small samples without defects - Part 19: Hard degree measurement": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the State and Forestry and Grassland Administration: This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41): This document was drafted by: Wood Industry Research Institute, Chinese Academy of Forestry, Zhejiang Longzhenge Hongmu Furniture Co:, Ltd:, Jiangsu Brothers Smart Home Co:, Ltd:, Dehua Bunny Decoration New Materials Co:, Ltd:, Xiamen Minghongtang Arts and Crafts Co:, Ltd:, Jiusheng Flooring Co:, Ltd: Company, Anhui Agricultural University, International Bamboo and Rattan Center, Zhejiang Woodcarving Mahogany Furniture Product Quality Inspection Center: The main drafters of this document: Zhao Youke, Wang Youhong, Jiang Zehui, Jiang Jindong, Yu Huaqiang, Liu Yixing, Wang Chuangui, Liu Xing'e, Li Xiaoling, An Xin, Zhang Ran, Xu Jinmei, Sun Longxiang, Huang Can, Xin Jiangmei, Lu Xun, Yang Shuming: The previous versions of this document and its superseded documents are as follows: --- First published in 1980 as GB/T 1941-1980, first revised in:1991, second revised in:2009; --- This is the third revision, adjusted to Part 19 of GB/T 1927:IntroductionThe standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc: It is widely used and is an important basic standard in the wood industry: In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood: The domestic standard (GB/T 1927~GB/T 1943) was revised in:1991 and:2009 respectively: In recent years, with the development of wood science and technology Development, International Organization for Standardization (ISO ) on ISO 3129:2012 "Sampling methods and general Requirements" has been revised, ISO 3130:1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131:1975 "Wood physical and mechanical tests" 15 international standards for test methods such as "Determination of Density in Mechanical Tests" have been integrated and revised: Based on this, in order to be in line with international standards, this time The third revision of the national standard for test methods for physical and mechanical properties of wood, the integration of 22 scattered test methods into GB/T 1927 Part of the document, in revision to adopt the latest edition of the International Standard: GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts: --- Part 1: Collection of test materials: The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects: --- Part 2: Sampling methods and general requirements: The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects: Specimen sawing, interception methods and general requirements to be observed when testing methods: --- Part 3: Determination of growth ring width and latewood rate: The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood method of measurement: --- Part 4: Determination of moisture content: The purpose is to describe a method for the determination of the moisture content of small wood samples without defects: --- Part 5: Density determination: The purpose is to describe the density, air-dry density, absolute dry Methods for the determination of density and basic density: --- Part 6: Determination of dry shrinkage: The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood: determined method: --- Part 7: Determination of water absorption: The purpose is to describe the determination method of 6h, 24h and the maximum water absorption of small sample wood without defects: --- Part 8: Determination of swelling: The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples: determined method: --- Part 9: Determination of flexural strength: The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects: --- Part 10: Determination of flexural modulus of elasticity: The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects: --- Part 11: Determination of compressive strength along grain: The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects: --- Part 12: Determination of transverse grain compressive strength: The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including Methods for the determination of the total compressive proportional ultimate strength of the horizontal grain and the partial compressive proportional ultimate strength of the horizontal grain: --- Part 13: Determination of compressive elastic modulus of transverse grains: The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood: determined method: --- Part 14: Determination of tensile strength along grain: The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood: --- Part 15: Determination of transverse grain tensile strength: The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects: --- Part 16: Determination of shear strength along grain: The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects: --- Part 17: Determination of impact toughness: The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples: --- Part 18: Determination of impact indentation: The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood: --- Part 19: Determination of hardness: The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples: --- Part 20: Determination of splitting resistance: The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects: --- Part 21: Determination of nail holding force: The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects: Test method for physical and mechanical properties of wood with small sample without defect Part 19: Determination of hardness1 ScopeThis document describes the test equipment, specimens, test procedures, calculation of results, and recording and reporting of test results for the determination of wood hardness: This document is applicable to the determination of the hardness of the diameter surface, chord surface and end surface of small wood samples without defects:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 1927:2-2021 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2: Sampling methods and general requirements (ISO 3129:2019, MOD) GB/T 1927:4-2021 Test methods for physical and mechanical properties of wood with small samples without defects - Part 4: Determination of moisture content (ISO 13061-1:2014, MOD) GB/T 1927:5-2021 Test methods for the physical and mechanical properties of wood with small unblemished samples - Part 5: Determination of density (ISO 13061-2: 2014, MOD) LY/T 1788 Terms for wood properties3 Terms and DefinitionsTerms and definitions defined in LY/T 1788 apply to this document:4 PrinciplesWood has the ability to resist the intrusion of other rigid bodies: Use a hemispherical steel indenter with a specified radius to press into the wood under static load to press it in The resistance received at the time indicates its hardness:5 Test equipment5:1 Testing machine The accuracy of measuring the load shall meet the requirements of 5:5 in GB/T 1927:2-2021: 5:2 Electric contact hardness test equipment Including a hemispherical steel indenter with a radius of (5:64±0:01) mm: Other types that allow the use of hemispherical steel indenters with the same radius type test equipment: Refer to Figure 1: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.19-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.19-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1927.19-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.19-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
