GB/T 1927.18-2021 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1927.18-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 18: Determination of resistance to impact indentation Status: Valid
Basic dataStandard ID: GB/T 1927.18-2021 (GB/T1927.18-2021)Description (Translated English): Test methods for physical and mechanical properties of small clear wood specimens - Part 18: Determination of resistance to impact indentation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B68 Word Count Estimation: 9,929 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 1927.18-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 18: Determination of resistance to impact indentation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for physical and mechanical properties of small clear wood specimens -- Part 18: Determination of resistance to impact indentation ICS 79:040 CCSB68 National Standards of People's Republic of China Test method for physical and mechanical properties of wood with small sample without defect Part 18: Determination of impact indentation resistance (ISO 13061-11:2017, Physical and mechanical properties of wood- Published on 2021-12-31 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 18 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects": GB/T 1927 has been issued The following parts are distributed: --- Part 1: Collection of test materials; --- Part 2: Sampling methods and general requirements; --- Part 3: Determination of growth ring width and latewood rate; --- Part 4: Determination of moisture content; --- Part 5: Density determination; --- Part 6: Determination of dry shrinkage; --- Part 7: Determination of water absorption; --- Part 8: Determination of swelling properties; --- Part 9: Determination of flexural strength; --- Part 10: Determination of flexural modulus of elasticity; --- Part 12: Determination of transverse grain compressive strength; --- Part 17: Determination of impact toughness; --- Part 18: Determination of impact indentation; --- Part 19: Determination of hardness; --- Part 20: Determination of splitting resistance: This document is modified to adopt ISO 13061-11:2017 "Wood physical and mechanical test methods for small test specimens with flawless properties - Part 11: Impact resistance Hit Indentation Determination": This document has structural changes from ISO 13061-11:2017: --- Added "Terms and Definitions" (see Chapter 3): The technical differences between this document and ISO 13061-11:2017 and their reasons are as follows: --- Regarding normative reference documents, this document has made adjustments with technical differences to adapt to the technical conditions of our country and the circumstances of the adjustment: The situation is reflected in Chapter 2 "Normative References", and the specific adjustments are as follows: ● Added GB/T 1927:1-2021; ● Replace ISO 3129:2019 with GB/T 1927:2-2021 which is modified to adopt international standard (see 6:1); ● Replace ISO 13061-1:2014 with GB/T 1927:4-2021 which is modified to adopt international standard (see 6:2); ● Replace ISO 13061-2:2014 with GB/T 1927:5-2021 which is modified to adopt international standard (see 6:3); ● Deleted ISO 24294, the term of logs and sawn timber is not involved in this document, so this reference standard is deleted: --- Added the principle (see Chapter 4), which is consistent with other parts of the standard of the test method for the physical and mechanical properties of wood with small samples without defects: --- Added the schematic diagram of the falling ball impact testing machine (see Chapter 5), which is helpful for understanding the testing equipment: ---Increase the number of defect-free small sample wood samples in the falling ball impact test (see 6:4), and calculate the coefficient of variation from the test data as 15%, and obtained in accordance with 5:1:1 in GB/T 1927:2-2021: The following editorial changes have also been made to this document: --- In order to harmonize with the existing standards, the name of the standard is changed to "Test methods for physical and mechanical properties of wood with small samples without defects - Part 18: Resistance to Impact Indentation Determination": Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the State Forestry and Grassland Administration: This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41): This document is drafted by: Timber Industry Research Institute, Chinese Academy of Forestry, Dongyang Yugantang Palace Mahogany Furniture Co:, Ltd:, Xiamen Menming Hongtang Arts & Crafts Co:, Ltd:, Dehua Bunny Decoration New Materials Co:, Ltd:, Jiusheng Flooring Co:, Ltd:, Shandong Agricultural University, Sichuan Agricultural University, Northwest Agriculture and Forestry University, Southwest Forestry University, Guangdong Forestry Research Institute: The main drafters of this document: Zhang Ran, Duan Xinfang, Xi Enhua, Yu Huaqiang, Zhang Shaobo, Xie Guijun, Lao Wanli, Yujia, Wang Rui, Zhao Youke, Xu Jinmei, Li Xiaoling, An Xin, Chu Jie, Tang Zhengjie, Ma Haijun, Huang Can, Shen Juanxia, Chao Jiu:IntroductionThe standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc: It is widely used and is an important basic standard in the wood industry: In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood: The domestic standard (GB/T 1927~GB/T 1943) was revised twice in:1991 and:2009 respectively: In recent years, with the development of wood science and technology The development of technology, ISO 3129:2012 "Sampling methods for wood physical and mechanical tests of small samples of wood without defects and "General Requirements" has been revised, ISO 3130:1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131:1975 "Wood 15 international standards for test methods such as "Determination of Density in Physical and Mechanical Tests" have been integrated and revised: Based on this, in order to be in line with international standards, this time The third revision was made to the national standard for test methods for physical and mechanical properties of wood in my country, and the 22 scattered test methods were integrated and adjusted to The sub-part document of GB/T 1927 adopts the latest version of the international standard in the revision: GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts: --- Part 1: Collection of test materials: The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects: --- Part 2: Sampling methods and general requirements: The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects: Specimen sawing, interception methods and general requirements to be observed when testing methods: --- Part 3: Determination of growth ring width and latewood rate: The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood method of determination: --- Part 4: Determination of moisture content: The purpose is to describe a method for the determination of the moisture content of small wood samples without defects: --- Part 5: Density determination: The purpose is to describe the density, air-dry density, absolute dry Methods for the determination of density and basic density: --- Part 6: Determination of dry shrinkage: The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood: determined method: --- Part 7: Determination of water absorption: The purpose is to describe the determination method of 6h, 24h and the maximum water absorption rate of small sample wood without defect: --- Part 8: Determination of swelling: The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples: determined method: --- Part 9: Determination of flexural strength: The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects: --- Part 10: Determination of flexural modulus of elasticity: The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects: --- Part 11: Determination of compressive strength along grain: The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects: --- Part 12: Determination of transverse grain compressive strength: The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including Methods for the determination of the total compressive proportional ultimate strength of the horizontal grain and the partial compressive proportional ultimate strength of the horizontal grain: --- Part 13: Determination of compressive elastic modulus of transverse grains: The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood: determined method: --- Part 14: Determination of tensile strength along grain: The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood: --- Part 15: Determination of transverse grain tensile strength: The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects: --- Part 16: Determination of shear strength along grain: The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects: --- Part 17: Determination of impact toughness: The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples: --- Part 18: Determination of impact indentation: The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood: --- Part 19: Determination of hardness: The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples: --- Part 20: Determination of splitting resistance: The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects: --- Part 21: Determination of nail holding force: The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects: Test method for physical and mechanical properties of wood with small sample without defect Part 18: Determination of impact indentation resistance1 ScopeThis document describes the principles, equipment and materials, sample collection, sample preparation and testing for the determination of the impact indentation of small unblemished wood samples: Parts requirements, test procedures, experimental data processing, experimental reports, etc: This document is applicable to the determination of the impact indentation resistance of small wood samples without defects:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 1927:1-2021 Test methods for the physical and mechanical properties of wood with small samples without defects - Part 1: Collection of test materials (ISO 4471: 1982, MOD) GB/T 1927:2-2021 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2: Sampling methods and general requirements (ISO 3129:2019, MOD) GB/T 1927:4-2021 Test methods for physical and mechanical properties of wood with small samples without defects - Part 4: Determination of moisture content (ISO 13061-1:2014, MOD) GB/T 1927:5-2021 Test methods for the physical and mechanical properties of wood with small unblemished samples - Part 5: Determination of density (ISO 13061- 2:2014, MOD)3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document:4 PrinciplesImpact the wood surface with a steel ball to produce indentation, and judge the impact resistance of the wood surface by detecting the indentation:5 Equipment and materials5:1 Falling ball impact testing machine (see Figure 1), or other equivalent devices: a) Impact height: (500±1)mm; b) Steel ball density: 7:8g/m3; c) Steel ball diameter: (25±0:05)mm; d) A device for fixing and placing the steel ball (the steel ball can fall freely from a height of 500mm); e) Requirements for the steel plate tray used to fix the specimen fixture: 15mm thick steel plate with a minimum diameter of 300mm; f) Grips for clamping the specimen on the pallet: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.18-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.18-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1927.18-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.18-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
