GB/T 1927.17-2021 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1927.17-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 17: Determination of impact bending strength Status: Valid
Basic dataStandard ID: GB/T 1927.17-2021 (GB/T1927.17-2021)Description (Translated English): Test methods for physical and mechanical properties of small clear wood specimens - Part 17: Determination of impact bending strength Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B68 Word Count Estimation: 7,757 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 1927.17-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 17: Determination of impact bending strength---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for physical and mechanical properties of small clear wood specimens -- Part 17: Determination of impact bending strength ICS 79:040 CCSB68 National Standards of People's Republic of China Replacing GB/T 1940-2009 Test method for physical and mechanical properties of wood with small sample without defect Part 17: Determination of impact toughness (ISO 13061-10:2017, Physical and mechanical properties of wood- 2021-12-31 Released 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted: This document is part 17 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects": GB/T 1927 has been issued The following parts are distributed: --- Part 1: Collection of test materials; --- Part 2: Sampling methods and general requirements; --- Part 3: Determination of growth ring width and latewood rate; --- Part 4: Determination of moisture content; --- Part 5: Density determination; --- Part 6: Determination of dry shrinkage; --- Part 7: Determination of water absorption; --- Part 8: Determination of swelling properties; --- Part 9: Determination of flexural strength; --- Part 10: Determination of flexural modulus of elasticity; --- Part 12: Determination of transverse grain compressive strength; --- Part 17: Determination of impact toughness; --- Part 18: Determination of impact indentation; --- Part 19: Determination of hardness; --- Part 20: Determination of splitting resistance: This document replaces GB/T 1940-2009 "Test method for impact toughness of wood": Compared with GB/T 1940-2009, except for structural adjustment In addition to editorial changes, the main technical changes are as follows: a) Changed the distance between the two supports of the sample to (240±1) mm (see 5:1, 4:1 of the:2009 edition); b) It is added that the sample can be tested under the condition of green wood or air-dried wood (see 6:2); c) Added requirements for sample preservation after preparation (see 6:3); d) Deleted the value when the impact toughness of the specimen was adjusted to 12% moisture content (7:2 of the:2009 edition): This document is modified to adopt ISO 13061-10:2017 "Test methods for the physical and mechanical properties of wood with small unblemished specimens - Part 10: Impact Determination of Flexural Strength": Compared with ISO 13061-10:2017, this document has the following structural adjustments: ---6:1 corresponds to 6:1, 6:2 in ISO 13061-10:2017; 6:2 corresponds to 6:3:1~6:3:3 in ISO 13061-10:2017; 6:3 Corresponds to 6:3:4 in ISO 13061-10:2017; ---7:1 corresponds to 7:1, 7:2 in ISO 13061-10:2017; 7:2 corresponds to 7:2, 7:3 in ISO 13061-10:2017; 7:3 corresponds to 7:4 in ISO 13061-10:2017; --- Chapter 8 corresponds to 8:1 in ISO 13061-10:2017: The technical differences between this document and ISO 13061-10:2017 and their reasons are as follows: --- Regarding normative reference documents, this document has made adjustments with technical differences to adapt to the technical conditions of our country and the circumstances of the adjustment: The situation is reflected in Chapter 2 "Normative References", and the specific adjustments are as follows: ● Replace ISO 3129 with GB/T 1927:2 which is modified to adopt international standard; ● Replace ISO 13061-1 with GB/T 1927:4 which is modified to adopt international standard; ● Replaced ISO 24294 with LY/T 1788; ● Deleted ISO 13061-2, which has no relevant analysis or description with impact toughness: --- Deleted the energy range requirements in International Standard 5:1, the test is highly maneuverable, and "should be broken once" is used in this document to achieve Scope provisions: --- Delete the equipment requirements for measuring density in International Standard 5:3, because there is no correlation between the measurement of density and impact toughness analysis or description: --- Changed the humidity requirements for air-drying samples in the environment in 6:3:3 of the international standard to be consistent with GB/T 1927:2-2021 The content of Chapter 5 remains the same: --- Deleted the requirements for the recording of fracture forms and the requirements for conchoidal fractures in the test report in International Standard 7:3: --- Delete the value of the impact toughness of the sample adjusted to the moisture content of 12% in International Standards 8:2 and 8:3, because the moisture content modification cannot be obtained: positive coefficient, and the effect of moisture content on impact toughness is negligible: The following editorial changes have been made to this document: --- In order to harmonize with the existing standards, the name of the standard is changed to "Test methods for physical and mechanical properties of wood with small samples without defects - Part 17: Crush Hit Toughness Test"; --- Added Appendix A (Informative) Wood Impact Toughness Test Record Table: Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the State Forestry and Grassland Administration: This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41): This document was drafted by: Anhui Agricultural University, Wood Industry Research Institute, Chinese Academy of Forestry, International Bamboo and Rattan Center, Xiamen Minghongtang Crafts Co:, Ltd:, Suzhou David Wood Co:, Ltd:, Zhejiang Shiyou Wood Co:, Ltd:, Northeast Forestry University: The main drafters of this document: Wang Youhong, Jiang Jinghui, Jiang Zehui, Liu Yixing, Liu Xing'e, Yu Huaqiang, Huang Can, Yu Lichun, Chen Long: The previous versions of this document and its superseded documents are as follows: --- First published in 1980 as GB 1940-1980, first revised in:1991, second revised in:2009; --- This is the third revision, adjusted to Part 17 of GB/T 1927:IntroductionThe standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc: It is widely used and is an important basic standard in the wood industry: In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood: The domestic standard (GB/T 1927~GB/T 1943) was revised twice in:1991 and:2009 respectively: In recent years, with the development of wood science and technology The development of technology, ISO 3129:2012 "Sampling methods for wood physical and mechanical tests of small samples of wood without defects and "General Requirements" has been revised, ISO 3130:1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131:1975 "Wood 15 international standards for test methods such as "Determination of Density in Physical and Mechanical Tests" have been integrated and revised: Based on this, in order to be in line with international standards, this time The third revision was made to the national standard for test methods for physical and mechanical properties of wood in my country, and the 22 scattered test methods were integrated and adjusted to The sub-part document of GB/T 1927 adopts the latest version of the international standard in the revision: GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts: --- Part 1: Collection of test materials: The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects: --- Part 2: Sampling methods and general requirements: The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects: Specimen sawing, interception methods and general requirements to be observed when testing methods: --- Part 3: Determination of growth ring width and latewood rate: The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood method of determination: --- Part 4: Determination of moisture content: The purpose is to describe a method for the determination of the moisture content of small wood samples without defects: --- Part 5: Density determination: The purpose is to describe the density, air-dry density, absolute dry Methods for the determination of density and basic density: --- Part 6: Determination of dry shrinkage: The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood: determined method: --- Part 7: Determination of water absorption: The purpose is to describe the determination method of 6h, 24h and the maximum water absorption rate of small sample wood without defect: --- Part 8: Determination of swelling: The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples: determined method: --- Part 9: Determination of flexural strength: The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects: --- Part 10: Determination of flexural modulus of elasticity: The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects: --- Part 11: Determination of compressive strength along grain: The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects: --- Part 12: Determination of transverse grain compressive strength: The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including Methods for the determination of the total compressive proportional ultimate strength of the horizontal grain and the partial compressive proportional ultimate strength of the horizontal grain: --- Part 13: Determination of compressive elastic modulus of transverse grains: The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood: determined method: --- Part 14: Determination of tensile strength along grain: The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood: --- Part 15: Determination of transverse grain tensile strength: The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects: --- Part 16: Determination of shear strength along grain: The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects: --- Part 17: Determination of impact toughness: The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples: --- Part 18: Determination of impact indentation: The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood: --- Part 19: Determination of hardness: The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples: --- Part 20: Determination of splitting resistance: The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects: --- Part 21: Determination of nail holding force: The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects: Test method for physical and mechanical properties of wood with small sample without defect Part 17: Determination of impact toughness1 ScopeThis document describes the principles, test equipment, sample preparation, test procedures, calculation of results and test inspection records, etc: This document is applicable to the determination of the impact toughness of small samples of wood without defects:2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document: GB/T 1927:2-2021 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2: Sampling methods and general requirements (ISO 3129:2019, MOD) GB/T 1927:4-2021 Test methods for physical and mechanical properties of wood with small samples without defects - Part 4: Determination of moisture content (ISO 13061-1:2014, MOD) LY/T 1788 Timber Properties Terms3 Terms and DefinitionsTerms and definitions defined in LY/T 1788 apply to this document:4 PrinciplesAn impact load is applied to the center of the sample to cause bending failure of the sample to determine the impact toughness of the wood:5 Test equipment5:1 Pendulum impact testing machine, the measurement accuracy shall meet the requirements of 5:5 in GB/T 1927:2-2021: Specimen holder and pendulum punch The radius of curvature of the end is 15mm, the distance between the two supports is (240±1)mm, and the height of the supports should be greater than 20mm: 5:2 The measuring tool is a vernier caliper or other measuring tool, and the measurement size should be accurate to 0:1mm: 5:3 The wood moisture content measurement equipment shall comply with the provisions of Chapter 5 of GB/T 1927:4-2021:6 samples6:1 The size of the sample is 300mm × 20mm × 20mm, and the length is along the grain direction; the production requirements and inspection of the sample shall meet the Provisions in 4:2 of GB/T 1927:2-2021: 6:2 Specimens may be air-dried or green: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.17-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.17-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1927.17-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.17-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
