GB 19147-2016 PDF EnglishUS$115.00 · In stock · Download in 9 seconds
GB 19147-2016: Automobile diesel fuels Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 19147: Historical versions
GB 19147-2016: Automobile diesel fuels---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19147-2016NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 75.160.20 E 31 Replacing GB 19147-2013 Automobile diesel fuels [Including Amendment 2018XG1] Issued on. DECEMBER 23, 2016 Implemented on. DECEMBER 23, 2015 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 7 4 Product classification... 7 5 Technical requirements and test methods... 8 6 Sampling... 14 7 Marking, packaging, transportation and storage... 14 8 Safety... 14 9 Standard implementation... 14 Annex A (informative) The minimum temperature with the risk rate of 10 % of some regions... 16 Annex B (normative) Test for nitrate-type cetane number modifiers in automobile diesel fuels... 18 GB 19147-2016 “Automobile diesel fuels” No. 1 amendment of national standard... 21ForewordAll technical contents of this Standard are mandatory. This Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB 19147-2013 “Automobile diesel fuels (V)”. Compared with GB 19147-2013, in addition to editorial modifications, main technical changes of this Standard are as follows. - ADD “automobile diesel fuels cannot be artificially added with methanol” (see 5.1 of this Standard, 5.1 of 2013 edition); - DELETE technical requirements and test methods for automobile diesel fuels (III) (see Table 1 of 2013 edition); ADD technical requirements and test methods for automobile diesel fuels (V) (see Table 3 of this Standard) - INCREASE the flash point of No. 5, No. 0 and No. 10 automobile diesel fuels TO not lower than 60 °C (see Table 1 and Table 2 of this Standard, Table 2 and Table 3 of 2013 edition); - MODIFY the arbitration test method of 10 % carbon residue of distillation residue TO GB/T 17144; - MODIFY the arbitration test method of polycyclic aromatic hydrocarbons content TO SH/T 0806; - ADD the determination method, NB/SH/T 0916, of fatty acid methyl ester content, which is regarded as the arbitration test method; - MODIFY Clause 9, “Implementation of the Standard” (see Clause 9 of this Standard, Clause 9 of 2013 edition). This Standard is proposed by National Energy Board. This Standard is under the technical jurisdiction of Subcommittee on Petroleum and Lubricants of National Technical Committee on Petroleum Products and Lubricants of Standardization Administration of China (SAC/TC 280/SC 1). Drafting organizations of this Standard. China Petroleum & Chemical Corporation Petrochemical Research Institute, China National Petroleum Corporation Refining and Chemical Branch, China National Petroleum Corporation Petrochemical Research Institute, China Petroleum Refining and Chemical Co., Ltd., China Automotive Research Center. Main drafters of this Standard. Ni Bei, Long Jun, Li Wenle, Zhang Jianrong, Zhang Yan, Zhang Guoxiang, Ding Xiaoliang, Zhang Chunlong, Liu Qian. The previous edition of the standards replaced by this Standard are as follows. - GB/T 19147-2003, GB 19147-2009, GB 19147-2013 “Automobile diesel fuels (IV)”, GB 19147-2013 “Automobile diesel fuels (V)”. Automobile diesel fuels WARNING - If the appropriate protective measures are not observed, the products in this Standard may be dangerous in the course of production, transportation, handling, storage and use. This Standard is not intended to advise on all safety issues related to this product. It is the responsibility of the user to adopt appropriate safety and protective measures and to ensure compliance with the conditions set forth in the relevant national regulations.1 ScopeThis Standard specifies terms and definitions, product classification, technical requirements and test methods, sampling, marking, packaging, transportation and storage, safety and implementation of the Standard of automobile diesel fuels. This Standard applies to automobile diesel fuels made from the petroleum or added with additives that improve the use performance, for compression-ignition engine automobiles. This Standard does not apply to automobile diesel fuels with biodiesel as a blending component.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the dated edition cited applies. For undated references, the latest edition of the referenced document (including all amendments) applies. GB 190 Packing symbol of dangerous goods GB/T 258 Standard test method for determination of acidity of light petroleum products GB/T 260 Determination of water content in petroleum products GB/T 261 Determination of flash point - Pensky-Martens closed cup method GB/T 265 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity GB/T 268 Petroleum products - Determination of carbon residue - Conradson method3 Terms and definitionsFor the purpose of this document, the following terms and definitions. 3.1 content of polycyclic aromatic hydrocarbons Total aromatic hydrocarbon content in automobile diesel fuels minus the monocyclic aromatic hydrocarbon content.4 Product classificationAutomobile diesel fuels are divided into six designations according to the solidification point.5 Technical requirements and test methods5.1 Additives used in automobile diesel fuels shall be of no known hazardous effects. Additives shall be used in the recommended dosage. Automobile diesel fuels shall not contain any additives and contaminants that may cause the automobile fail to function properly. 5.2 Technical requirements and test methods for automobile diesel fuels (IV), automobile diesel fuels (V) and automobile diesel fuels (VI) are as shown in Table 1, Table 2 and Table 3, respectively.6 SamplingSampling is carried out in accordance with GB/T 4756; take 4 L for inspection and as reserve samples.7 Marking, packaging, transportation and storage7.1 The tanker for automobile diesel fuels, complying with the requirements in Table 1, Table 2 and Table 3 of this Standard, that are sold to users shall be clearly marked with the name, designation and grade (IV, V or VI) of the product, e.g. 7.2 Automobile diesel fuels are flammable liquids, their marking, packaging, transportation, storage and delivery acceptance shall comply with SH 0164, GB 30000.7-2013 and GB 190.8 SafetyAutomobile diesel fuels are flammable liquids, their hazard description and precautionary statement is given in Annex D of GB 30000.7-2013.9 Standard implementationThis Standard has been implemented nationwide since the date of issuing, basing on the transition period requirements of gradual introduction. The transition period of the technical requirements specified in Table 2 is until December 31, 2016; since January 1, 2017, the technical requirements specified in Table 1 are abolished.Annex A(informative) The minimum temperature with the risk rate of 10 % of some regions A.1 The minimum temperature with the risk rate of 10 % of some regions The minimum temperature with the risk rate of 10 % of some regions (see Table A.1) is extracted from the Temperature Data for Petroleum Product Standards prepared by the Central Meteorological Bureau. It is obtained by analyzing the maximum (minimum) temperature record each day from 1961 to 1980 of China’s 152 meteorological stations. The minimum temperature with the risk rate of 10 % for a month indicates that the probability that the minimum temperature below the value in this month is 0.1, or the probability that the minimum temperature above the value in this month is 0.9. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 19147-2016 be delivered?Answer: The full copy PDF of English version of GB 19147-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 19147-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB 19147-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19147-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 19147-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19147-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 19147-2016?A step-by-step guide to download PDF of GB 19147-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 19147-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
