GB/T 19126-2015 English PDFUS$149.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19126-2015: Low-speed vehicle -- Seat systems -- Strength requirements and test methods Status: Valid GB/T 19126: Historical versions
Basic dataStandard ID: GB/T 19126-2015 (GB/T19126-2015)Description (Translated English): Low-speed vehicle -- Seat systems -- Strength requirements and test methods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T54 Classification of International Standard: 65.060 Word Count Estimation: 7,762 Date of Issue: 2015-05-15 Date of Implementation: 2015-10-01 Older Standard (superseded by this standard): GB/T 19126-2003 Quoted Standard: GB/T 11563 Regulation (derived from): National Standard Announcement 2015 No. 15 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the technical requirements for low-speed vehicle seat system, strength requirements and test methods. This Standard applies to low-speed vehicle seat and fixtures, three cars can be implemented by reference. This Standard does not apply to the additional folding chairs, side chairs and seats do not meet the requirements defined in a simple chair. GB/T 19126-2015: Low-speed vehicle -- Seat systems -- Strength requirements and test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Low-speed vehicle. Seat systems. Strength requirements and test methods ICS 65.060 T54 National Standards of People's Republic of China Replacing GB/T 19126-2003 Three-wheeled vehicles and low-speed vehicles seating system Strength requirements and test methods Issued on. 2015-05-15 2015-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 19126-2003 "farm vehicles Seat systems - Strength requirements and test methods." This standard GB/T 19126-2003 main changes are as follows. --- Standard name from "farm vehicles Seat systems - Strength requirements and test methods" to "three-wheeled vehicles and low-speed vehicles And test methods "seating system strength requirements; --- The "three farm vehicles" was renamed "three cars", "four-wheel farm vehicles" was renamed "low-speed vehicles"; --- Added "headrest" terms and definitions; --- Increase the technical requirements of the seat and the corresponding test methods. The standard proposed by China Machinery Industry Federation. The low standard by the National Automotive Standardization Technical Committee (SAC/TC234) centralized. This standard is drafted by. Country farm machinery Quality Supervision and Inspection Center. Participated in the drafting of this standard. Machinery Tractor Farm Transporter Products Quality Inspection Center, the State Quality Supervision, Inspection and tractors Heart, Jiangsu University, Shandong Shifeng (Group) Co., Ltd., Shandong five levy Group Co., Ltd. The main drafters of this standard. Chen Ge, Zhang Xian wins, Lv Shusheng, Min Haitao, Lang blog, Zheng Yue, Chen Kunshan, Lin Lianhua, Wang Xia people. This standard replaces the standards previously issued as follows. --- GB/T 19126-2003. Three-wheeled vehicles and low-speed vehicles seating system Strength requirements and test methods1 ScopeThis standard specifies the low-speed trucks seating system (hereinafter referred to as the seat) technical requirements, strength requirements and test methods. This standard applies to low-speed vehicle seat and fixtures. Three-wheeled vehicles may be implemented by reference. This standard does not apply to the additional folding chairs, side chairs and seats do not meet the requirements defined in a simple chair.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 11563 cars H-point determination procedures3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Seat seat The seat and backrest frame as a single entity and removed from the body as a whole seat assembly. 3.2 Adjusting means adjustmentsystem Or a member of the seat position can be adjusted to accommodate a rider's posture apparatus. The apparatus generally includes adjusting the longitudinal position, vertical Adjust the position and angle adjustment. 3.3 Limiter limitingdevice In the folding seat, articulated on the seat can be flipped to limit or adjust the seat forward or back flip device. 3.4 Seat centroid centerofmassinseat Seat height and angle of the reference position in the design of the seat assembly centroid. 3.5 Headrest headrestraint Limit for adult occupant's head relative to the torso after the move to reduce the extent of damage in the event of a collision may be the cervical spine Means. 3.6 Folding seat colapsibleseat Backrest, seat cushion is hinged and can be folded together seat. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19126-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 19126-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19126-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19126-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 19126-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19126-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
