GB/T 19069-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19069-2017: Stall regulation wind turbines -- Control system -- Technical condition Status: Valid GB/T 19069: Historical versions
Basic dataStandard ID: GB/T 19069-2017 (GB/T19069-2017)Description (Translated English): Stall regulation wind turbines -- Control system -- Technical condition Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F11 Classification of International Standard: 27.180 Word Count Estimation: 18,179 Date of Issue: 2017-10-14 Date of Implementation: 2018-05-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 19069-2017: Stall regulation wind turbines -- Control system -- Technical condition---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Stall regulation wind turbines - Control system - Technical condition ICS 27.180 F11 National Standards of People's Republic of China Replacing GB/T 19069-2003 Stall-type wind turbine control system Technical conditions 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General requirements 4 5 technical requirements 6 6 test methods 11 7 Inspection rules 11 8 Product Information 12 9 Packaging, transportation and storage 13 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 19069-2003 "wind turbine controller technical conditions." This standard compared with GB/T 19069-2003, in addition to editorial changes outside the main technical changes are as follows. --- Added "controller" terms and definitions (see 3.18); --- Modify the "environmental conditions" (see 4.2,.2003 version 4.2); --- Modify the "grid conditions" (see 4.3,.2003 version 4.2); --- Modify the "monitoring function" (see 5.2,.2003 version 5.2.2); --- Modify the "control function" (see 5.3,.2003 version 5.2.1); --- Removed "large and small generator switch control" (see.2003 version 5.5); --- Added "communication requirements" (see 5.5); --- Added "electromagnetic compatibility requirements" (see 5.6); --- Added "low temperature performance requirements" (see 5.7); --- Added "high temperature performance requirements" (see 5.8); --- Added "hot and humid performance requirements" (see 5.9); --- Added "mechanical performance requirements" (see 5.10); --- Added "test method" (see Chapter 6); --- Adjust and modify the "Inspection Rules" (see Chapter 7,.2003 Edition Chapter 8); --- Adjust and modify the "Product Information" (see Chapter 8,.2003 edition Chapter 9); --- Added "packaging, transport and storage" (see Chapter 9). This standard is proposed by the China Machinery Industry Federation. This standard by the National Wind Machinery Standardization Technical Committee (SAC/TC50) centralized. This standard is drafted by. Beijing Kono Albert Technologies Co., Ltd., Baoding Kono Albert Control Equipment Co., Ltd., Kono Wei Industry Wind Energy Equipment (Beijing) Co., Ltd., Institute of Electrical Engineering, Chinese Academy of Sciences, Xinjiang Goldwind Technology Co., Ltd., Zhejiang Yunda Wind Power Co., Ltd. Co., Ltd., Huayi Wind Power Co., Ltd., Fengdian Energy Technology Co., Ltd. The main drafters of this standard. Xu Honghua, Zhao Bin, Li Haidong, Gu Haitao, Shao Guiping, Gao Jun'e, Zhang Lei, Hu Shuju, Wu Xiangjun, Gan Xuchao, Shi Xiaoming, Chen Jinjian, Hu Chunsong, Wang Wenjing. This standard replaces the standards previously issued as. --- GB/T 19069-2003. Stall-type wind turbine control system Technical conditions1 ScopeThis standard specifies the pitch-stall-based grid-connected wind turbine control system related terms and definitions, general requirements, technical requirements, Test methods, inspection rules, product information, packaging, shipping and storage. This standard applies to parallel operation with the grid, the use of asynchronous generator stalling pitch wind turbine control system.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 2900.53 Electrotechnical terminology wind turbine GB/T 4588.1 metal-free single-sided PCB printed circuit board sub-standard GB/T 4588.2 metal double-sided printed circuit board with a sub-standard GB/T 11287-2000 Electrical relays - Part 21. Vibration, shock, bump and earthquakes of measuring relays and protection devices Test Part 1. Vibration test (sine) GB/T 13384 mechanical and electrical product packaging General technical conditions Shock and collision tests for measuring relays and protection equipment GB/T 15969.1 programmable logic controller Part 1. General Information GB/T 15969.2 programmable logic controller Part 2. Equipment requirements and testing GB/T 16895.21 low voltage electrical installations - Part 4-41. Safety protection Shock protection Electromagnetic compatibility (EMC) test and measurement techniques Electrostatic discharge (IMD) immunity test GB/T 17626.3-2016 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field radiation immunity test GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility test and measurement techniques surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility test and measurement techniques RF field induced conduction disturbances immunity Electromagnetic compatibility (EMC) - Tests and measurement techniques - Ringing wave immunity test GB/T 19070 stall-type wind turbine control system test methods GB/T 20626.1 special environmental conditions Highland Electrical and Electronic Products Part 1. General technical requirements GB/T 31140 highland wind power equipment environmental technology requirements IEC 60204-1 Safety of Machinery - Mechanical Electrical Equipment Part 1. General Requirements (Safetyofmachinery-Electrical equipmentofmachines-Part 1.Generalrequirements)3 Terms and definitionsGB/T 2900.53 defined and the following terms and definitions apply to this document. ...... |
