GB/T 19056-2021 PDF EnglishUS$595.00 · In stock · Download in 9 seconds
GB/T 19056-2021: Vehicle travelling data recorder Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 19056: Historical versions
Similar standardsGB/T 19056-2021: Vehicle travelling data recorder---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19056-2021NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.01 CCS T 35 Replacing GB/T 19056-2012 Vehicle Travelling Data Recorder Issued on. DECEMBER 31, 2021 Implemented on. JULY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 6 2 Normative References... 6 3 Terms and Definitions... 7 4 Abbreviations... 9 5 Requirements... 9 6 Test Methods... 24 7 Inspection Rules... 34 8 Installation... 37 9 Packaging... 38 Appendix A (Normative) Driving Record Data Storage Format... 39 Appendix B (Normative) USB Data Acquisition Conventions... 51 Appendix C (Normative) Driver Information IC Card Data Storage Format... 52 Appendix D (Normative) Bluetooth Data Communication Protocol... 53 Appendix E (Normative) Protection Performance Requirements and Test Methods of Protection Memory... 62 Bibliography... 661 ScopeThis Document specifies the terms and definitions, requirements, test methods, inspection rules, installation and packaging of vehicle travelling data recorder. This Document applies to the design, manufacture, inspection and installation of the vehicle travelling data recorder.2 Normative ReferencesThe provisions in following documents become the provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 2423.1 Environmental Testing for Electric and Electronic and Electronic Products - Part 2.Test Methods - Tests A. Cold GB/T 2423.2 Environmental Testing for Electric and Electronic and Electronic Products - Part 2.Test Methods - Tests B. Dry Heat GB/T 2423.3 Environmental Testing - Part 2.Testing Method - Test Cab. Damp Heat, Steady State GB/T 2423.5 Environmental Testing for Electric and Electronic Products Part 2.Test Methods Test Ea and Guidance. Shock GB/T 2423.10 Environmental Testing for Electric and Electronic Products - Part 2.Tests Methods - Test Fc. Vibration (Sinusoidal) GB 4094 Motor Vehicles - Symbols for Controls, Indicators and Tell-Tales GB/T 4208 Degrees of Protection Provided by Enclosure (IP Code) GB/T 16649.1 Identification Cards - Integrated Circuit(S) Cards with Contacts - Part 1. Physical Characteristics GB/T 16649.2 Identification Cards - Integrated Circuit(S) Cards with Contacts - Part 2. Dimensions and Location of the Contacts3 Terms and DefinitionsFor the purposes of this Document, the following terms and definitions apply. 3.1 Vehicle travelling data recorder A digital electronic recording device that records and stores data such as vehicle speed, time, location, and audio and video data, and can output data through data communication. 3.2 Impulse ratio The number of pulse signals generated by the vehicle speed sensor when the vehicle travels a distance of 1km. 3.3 Start time of travelling The time before 10s when the vehicle changes from the parking state to the running state (the speed is greater than 0 km/h and lasts for more than 10s). 3.4 End time of travelling The time before 10s when the vehicle changes from the running state to the parking state (the speed is equal to 0 km/h and lasts for more than 10s). 3.5 Continuous driving time The driving time of the same driver between two adjacent parking rest periods of no less than 20 min 3.6 Start time of continuous driving The first start time of travelling after the parking rest period of no less than 20 minutes.4 AbbreviationsThe following abbreviations are applicable to this Document. AAC. Advanced Audio Coding; ABS. Antilock Brake System; AVI. Audio Video Interleave; CAN. Controller Area Network; FTP. File Transfer Protocol; IC. Integrated Circuit; MP4.MPEG-4 Part 4; MFT. Modulation Transfer Function; QTFF. QucikTime File Format; SPP. Serial Port Profile; SSP. Secure Simple Paring; USB. Universal Serial Bus; VIN. Vehicle Identification Number;5 Requirements5.1 General requirements 5.1.1 Composition The vehicle travelling recorder (hereinafter referred to as "recorder") is mainly composed of the following parts. 5.1.2 Appearance structure The recorder host shall adopt an integrated standard single-spindle structure; and each component module shall be located in the host body. The size of the front panel of the host shall meet the requirements of (188mm±2mm) × (60mm±2mm); and the opening size of the recorder host using the embedded installation method of the vehicle instrument panel shall be no larger than 182+0.8 0 mm × 53+0.5 0 mm. 5.1.3 Text, graphics, signs The text, graphics and signs used by the recorder shall meet the following requirements. 5.1.4 Nameplate The recorder shall have a nameplate, which shall meet the following requirements. 5.2 Electrical components 5.2.1 Power supply The power supply of the recorder shall be the vehicle power supply. 5.2.2 Connectors and signals 5.2.3 Connection wires The connection wire of the recorder shall use a flame-retardant low-voltage wire with a temperature characteristic grade of no lower than -40℃~105℃. 5.2.4 Fuses If the recorder uses a fuse, the rated current value of the fuse shall be clearly marked on the outer surface of the fuse. The installation and replacement of fuses shall be convenient. 5.3 Electrical performance 5.3.1 Adaptability of power supply voltage Carry out the voltage adaptability test within the fluctuation range of power supply voltage specified in Table 2.After the test, the data recording, display, data communication and other functions of the recorder shall be normal. 5.3.2 Resistance to reverse polarity of power supply Under the voltage for reverse polarity test specified in Table 2, the recorder shall be able to withstand the reverse polarity test for 1 min; and there shall be no other electrical faults except for the fuse (which allows the replacement of a burned-out fuse). After the test, the data recording, display, data communication and other functions of the recorder shall be normal. 5.3.3 Resistance to power supply overvoltage Under the overvoltage specified in Table 2, the recorder shall be able to withstand the power supply overvoltage test for 1min. After the test, the data recording, display, data communication and other functions of the recorder shall be normal. 5.3.4 Power-off protection performance The recorder shall automatically enter the protection state after the power-off; and the data stored before the power-off shall not be lost. The real-time of the recorder shall normally be maintained for more than 15 calendar days after power-off. 5.4 Functional Requirements 5.4.1 Driving record function 5.6 Data analysis system The data analysis system shall be able to collect, store and analyze the driving record data; and the data analysis protocol shall comply with the provisions of Appendix A. The system shall use the Chinese interface, which can be installed and used in the general Chinese operating system. The system shall have functions such as query and statistics of driving record data, graph generation, audio and video playback, parameter query, and operation authority management. The data analysis system shall be able to generate at least the following charts. 5.8 Climate and environmental adaptability After the recorder has been subjected to various climatic and environmental tests, there shall be no electrical failure, and the casing, connectors, etc. shall not be seriously deformed; its data recording function and display function shall remain normal; the data stored before the test shall not be lost. 5.9 Adaptability to mechanical environment After the recorder has been subjected to various mechanical environmental tests, there shall be no permanent structural deformation; no damage to parts; no electrical failure, no loosening of fastening parts, and connectors such as plugs and communication interfaces shall not fall off or poorly contact; its data recording function and display function shall remain normal; the data stored before the test shall not be lost. 5.10 Enclosure protection grade The enclosure protection grade of the recorder host shall meet the requirements of IP43 specified in GB/T 4208. 5.11 Anti-electric ignition interference of the vehicle The recorder shall not appear abnormality when conducting the electric ignition interference of the vehicle; and the data recording function and display function shall be normal. 5.12 Electrostatic discharge immunity There shall be no electrical failure during and after the electrostatic discharge test; the data recording function shall be normal; and the data stored before the test shall not be lost. It is allowed to display abnormal phenomena during the test, but the function shall return to normal after the end of the test.6 Test Methods6.1 Inspection of general requirements 6.1.1 Inspection of composition Visually inspect the structural composition of the recorder. 6.1.2 Inspection of appearance structure Inspect the appearance and structure of the recorder and measure the size of the recorder under the condition of environmental illumination of 300lx and eye distance of 300mm ~ 500mm. 6.1.3 Inspection of text, graphics, signs, nameplate Visually inspect the recorder's nameplate and its text, graphics and signs. Use a clean cotton cloth dipped in gasoline (above No. 90) to continuously wipe the text, graphics and signs for 15s; and visually inspect after the test. 6.2 Inspection of electrical component 6.2.1 Inspection of power supply Visually inspect how the recorder is powered. 6.2.4 Inspection of fuse Visually inspect whether the fuse is marked with the rated current value; and inspect the installation and replacement method of the fuse. 6.3 Electrical performance test 6.3.1 Power supply voltage adaptability test According to the different nominal power supply voltage of the recorder, test shall be carried out according to the following methods. 6.3.3 Resistance to power supply overvoltage test When the nominal power supply voltage of the recorder is 12V, apply a test voltage of 24V to it; when the nominal power supply voltage of the recorder is 24V, apply a test voltage of 36V to it; when the nominal power supply voltage of the recorder is 36V, apply a test voltage of 54V to it. The duration of the above test is 1min. Inspect the function of the recorder after the test. 6.3.4 Power-off protection test Connect the recorder stored with data to the nominal power supply voltage to work normally; disconnect the external power supply and the host power supply battery (if any); after 15 calendar days, inspect the real-time recorded by the recorder and its stored data information. 6.4 Functional inspection 6.4.1 Inspection of the driving record function 6.5 Performance test 6.5.1 Driving record performance test 6.5.1.1 Time record error test After calibrating the time of the recorder with a standard timing device; record the real-time of 24h continuously; and calculate the time recording error every 24h. 6.5.2 Positioning performance test The carrier phase differential (RTK) plane positioning accuracy of the positioning accuracy test equipment shall be no less than (in the static state). the constant of addition is 10mm, and the multiplication constant is one millionth of the distance between the base station and the mobile station. 6.5.3 Video image performance test 6.5.3.1 Image quality test Image resolution, frame rate, and pixels of facial feature pictures are analyzed through image quality analysis software. 6.7 Inspection of data security Inspect the raw data security of the recorder from both hardware and software aspects. Visually inspect whether the recorder's host and data memory and other important components have taken reliable protection measures; and carry out the protection performance test of the protection memory according to the method in Appendix E. Press the button on the recorder to inspect whether the driving record data can be changed or deleted. Set the parameters of the recorder and inspect whether the relevant parameter settings need to be authorized to operate. 6.8 Climate and environmental adaptability test 6.8.1 Test parameters 6.8.2 High temperature test7 Inspection Rules7.1 Type inspection Type inspection shall be carried out if one of the following conditions exists. a) During trial production of new product design or product type identification; b) Change the line of production or factory; c) Resumption of production after discontinuation; d) When there are major changes in structure, material or process, which may affect the performance of the product; e) The requirements of type inspection from the competent industry authorities or the relevant national quality supervision agencies, etc. Carry out the type inspection according to the provisions of Table 6.If one test does not meet the requirements, it is determined that the type inspection of this type of recorder is unqualified. 7.2 Exit-factory inspection The exit-factory inspection is selected by the manufacturer according to Table 6; and shall Standing test at low8 Installation8.1 Installation location The recorder shall be installed on the vehicle in areas away from collisions, overheating, direct sunlight and exhaust gas, water, oil and dust, and away from airbags, ABS and other sensitive electronic equipment. The installation location shall be convenient for operations such as reading display information, driver information logging in, pressing buttons and data collection in parking state of the vehicle (for instance, the vehicle instrument center console). 8.2 Wiring Requirements The wiring requirements for the installation of the recorder are as follows. 8.3 Parameter setting The recorder shall be set parameters according to the following requirements at each stage.9 Packaging9.1 Outer packaging The outer packaging of the product shall include the following. 9.2 Product certificate Each exit-factory recorder shall have a product inspection certificate, and the inspection certificate shall have the following contents. 9.3 Packing box The packing box shall meet the requirements of moisture-proof, dust-proof, shock-proof and transportation. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 19056-2021 be delivered?Answer: The full copy PDF of English version of GB/T 19056-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 19056-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19056-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 19056-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 19056-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19056-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 19056-2021?A step-by-step guide to download PDF of GB/T 19056-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 19056-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
