GB/T 18316-2008 English PDFUS$629.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18316-2008: Specifications for inspection and acceptance of quality of digital surveying and mapping achievements Status: Valid GB/T 18316: Historical versions
Basic dataStandard ID: GB/T 18316-2008 (GB/T18316-2008)Description (Translated English): Specifications for inspection and acceptance of quality of digital surveying and mapping achievements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A75 Classification of International Standard: 07.040 Word Count Estimation: 27,287 Date of Issue: 2008-07-02 Date of Implementation: 2008-12-01 Older Standard (superseded by this standard): GB/T 18316-2001 Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the inspection and acceptance of digital mapping results and quality assessment requirements, contents and methods. This standard applies to digital mapping results based on geographic information process inspection, final inspection and acceptance. Other digital mapping results can refer to use. GB/T 18316-2008: Specifications for inspection and acceptance of quality of digital surveying and mapping achievements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specifications for inspection and acceptance of quality of digital surveying and mapping achievements ICS 07.040 A75 National Standards of People's Republic of China Replacing GB/T 18316-2001 Digital mapping results quality inspection and acceptance Posted 2008-07-02 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Terms and definitions 1 3 Basic requirements 2 3.1 Acceptance of a secondary screening 2 3.2 Process inspection 3 3.3 Final Inspection 3 3.4 Acceptance 3 4 4 Quality Evaluation System 4.1 Quality elements 4 4.2 Quality sub-element 5 4.3 Check Item 5 4.4 Quality Evaluation Index 8 5 inspection and evaluation 14 5.1 QA 14 5.2 results of quality assessment unit 15 5.3 Batch quality of the outcome is determined 15 Appendix A (normative) Test report format 16ForewordThis standard replaces GB/T 18316-2001 "digital mapping products for inspection, acceptance and quality assessment." This standard GB/T 18316-2001, compared changes in technical content include. --- Delete the reference to deficiencies and defects demerit point system; --- Proposed quality elements, quality sub-elements, check the items three quality model to assess the results of checks at the core quality; --- For the acceptance of the new proposed sampling plan; --- Advocate program to check is the preferred method. Appendix A of this standard is a normative appendix. This standard is proposed and managed by the State Bureau of Surveying and Mapping. This standard was drafted. Standardization Institute of Surveying and Mapping National Mapping Bureau, National Mapping Product Quality Supervision and Testing Center, measured in Shaanxi Province Painted Product Quality Supervision and Inspection Station. The main drafters of this standard. Deng Guoqing, Ma Xiaoping, Macong Li, Tan Ming Jian, Jiao Jing Mei, Yan Zeng Wei Yanfeng Long. This standard replaces the standards previously issued as follows. --- GB/T 18316-2001.IntroductionThis standard is based on ISO 19113 "Geographic information quality principles", ISO 19114 "Geographic information quality evaluation process", ISO 19138 Relevant provisions of the "GIS data quality metrics" in the combination of digital surveying and mapping achievements of the current level of production technology, quality control of water Reality level, inspection and acceptance of GB/T 18316-2001 "digital mapping products for inspection, acceptance and quality assessment" carried out repair Order. This standard focuses on the needs of basic survey and consider digital surveying and mapping results. Digital mapping results quality inspection and acceptance1 ScopeThis standard specifies the digital mapping results of inspection and acceptance and quality assessment requirements, contents and methods. This standard applies to the process of fundamental geographic information digital mapping results of inspection, final inspection and acceptance. Other digital mapping results available Referring use.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 For the implementation of the inspection, and acceptance of the basic unit of division. Note. should the "web" as a unit. When there is a demand in the production of the principal, the mapping unit case may be authorized area, collection of feature classes, feature division etc. Unit results. 2.2 The same technical design requirements produced under the same set of results of the survey area unit. 2.3 The number of units in the batch achievement outcomes. 2.4 Quantitative description of the quality, the qualitative component. That achievement meet the requirements and use of the basic characteristics of purpose. Note. The contents of elements depends on the quality of the applicability of the results of its achievement standard, not all of the elements of quality for all results. [ISO 19113.2002, Terminology 4.5] 2.5 Part of the quality elements describe a particular aspect of the quality elements. [ISO 19113.2002, the term 4.11] 2.6 Check the quality of the content of child elements. Description Minimum implementation of the object minimum unit mass, quality inspection and assessment. 2.7 Check the unit to check the results of the quality requirements for all items. 2.8 Check the results of a particular unit checks the quality requirements. Note. The term generally refers to a specific examination important, quality requirements of particular interest or index, or systemic bias, error checks. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18316-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 18316-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18316-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18316-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18316-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18316-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
