GB/T 1786-2008 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1786-2008: Forging tortillas ultrasonic testing method
Status: Valid

GB/T 1786: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1786-2008	229	Add to Cart	3 days	Forging tortillas ultrasonic testing method	Valid
GB/T 1786-1990	319	Add to Cart	3 days	Cheese forging--Method for ultrasonic inspection	Obsolete

Similar standards

GB/T 3310   GB/T 4162   GB/T 5193   GB/T 6519   GB/T 6402   

Basic data

Standard ID: GB/T 1786-2008 (GB/T1786-2008)
Description (Translated English): Forging tortillas ultrasonic testing method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H26
Classification of International Standard: 77.040.20
Word Count Estimation: 10,163
Date of Issue: 2008-09-11
Date of Implementation: 2009-05-01
Older Standard (superseded by this standard): GB/T 1786-1990
Quoted Standard: GB/T 9445; GB/T 11259; JB/T 10061
Adopted Standard: AMS-STD-2154-2005, NEQ
Regulation (derived from): National Standard Approval Announcement 2008 No.16 (Total No.129)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the scope of application of the test block with a flat bottom hole to contact method of ultrasonic inspection method or flooding wrought tortillas (hereinafter referred to as pie) method, inspectors, inspection instruments and equipment, reference block, inspection conditions and defect assessment, , step quality assurance requirements and inspection reports.

GB/T 1786-2008: Forging tortillas ultrasonic testing method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Forging tortillas ultrasonic testing method ICS 77.040.20 H26 National Standards of People's Republic of China Replacing GB/T 1786-1990 Forged round cake ultrasonic inspection Posted 2008-09-11 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard and American Standard AMS-STD-2154-05 "deformation of the metal ultrasonic inspection procedures," the non-equivalent. This standard replaces GB/T 1786-1990 "Forged round cake ultrasonic inspection." This standard compared with GB/T 1786-1990, the main changes are as follows. --- Allows for increased contact method test; --- Canceled the rotary speed of the provisions; --- Added workpiece machined surface roughness requirements; --- Increasing the B-scan and C-scan display method display method; --- Increase the quality level of the division; --- Increasing the quality assurance requirements. Appendix A of this standard is a normative appendix. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard is mainly drafted by. Maanshan Iron & Steel Co., Ltd., Metallurgical Industry Information Standards Institute. The main drafters of this standard. Vincent Chan, Hou Jiang Xiao Feng, such as Zhang, Liu Yulan. This standard replaces the standards previously issued as follows. --- GB 1786-1979, GB/T 1786-1990. Forged round cake ultrasonic inspection

1 Scope

This standard specifies the reference block with a flat bottom hole, immersion or ultrasonic inspection contact method Wrought tortillas (hereinafter referred to as pie) method The scope of testing personnel, testing equipment and facilities, reference block, test conditions and procedures, defect evaluation, quality assurance and testing regulations report. This standard applies to the cross-sectional thickness not less than 8mm rotation (such as turbine disc, pressure plate filter machine, etc.) and high-temperature alloy forged steel round cake Ultrasonic flaw testing. Other uses ultrasonic examination of pie can be negotiated by both sides with reference to use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9445 NDT personnel qualification and certification GB/T 11259 Ultrasonic testing of a test block for steel production and Calibration JB/T 10061 A-mode pulse reflection type ultrasonic flaw detector General technical requirements

3 inspectors

Inspection by authorized personnel to obtain relevant qualification certificates and ultrasonic technology in the operation. Detection qualified person should be consistent GB/T 9445 standards and requirements, personnel with technical qualifications Ⅱ Ⅱ grade level or above certificate issued by the supervision and report.

4 testing instruments and equipment

4.1 Instrument 4.1.1 The frequency ultrasonic flaw detector and the probe should be selected according to the inspection requirements. Instruments equipped with an appropriate probe obtained when using ultrasound Operating frequency should generally be within the range of 2.0MHz ~ 10.0MHz. 4.1.2 ultrasonic flaw detector and the probe combination performance should be consistent with JB/T 10061 requirements. 4.1.3 The equipment should be regularly calibrated period is generally one year. When the instrument is made may affect the characteristics of the repaired, it should be calibrated, And obtain the relevant department issued the instrument calibration certificate. 4.2 Device 4.2.1 Testing and sink should be suitable for the subject pie requirements, the water tank should be clean and free of dust impact testing, bubbles and suspended solids, Water temperature should be maintained at between 10 ℃ ~ 35 ℃. When required, select suitable corrosion inhibitors and wetting agents. 4.2.2 Place pie tank turret should enable pie axis aligned with the axis of the turntable, error ± 2mm. Adjustable speed turntable, the turntable can be hand Dynamic manipulation. 4.2.3 move the probe along the radial pie, for spiral (or circular, rectangular and other equivalent scanning mode) test. Each rotation of a Weeks, the radial movement of the probe spacing of no more than one-half of the effective beam diameter of the probe without shaking, and the up and down movement of the distance from the water should meet Requirements. 4.2.4 probe angle manipulation device should be able to ensure that the probe in a plane perpendicular to the surface of the pie, in two directions perpendicular to each other even as Continuous manual adjustment, adjustment range of not less than 9 °, error is less than ± 0.5 °. 4.2.5 the scanning device should be able to accurately measure the position of the defect, and can smoothly and accurately positioning the probe in the proper position, the scanning accuracy to Least ± 1mm. Mark mode pie defect position shown in Figure 1, the first to identify the character as a reference point. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1786-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1786-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1786-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1786-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1786-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1786-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.