GB/T 17850.6-2011 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17850.6-2011: Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17850.6-2011	154	Add to Cart	3 days	Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag	Valid

Similar standards

GB/T 19349   GB/T 19350   GB/T 18838.3   GB/T 17850.9   GB/T 17850.4   GB/T 17850.5   

Basic data

Standard ID: GB/T 17850.6-2011 (GB/T17850.6-2011)
Description (Translated English): Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A29
Classification of International Standard: 25.220.10
Word Count Estimation: 8,877
Date of Issue: 2011-12-30
Date of Implementation: 2012-10-01
Quoted Standard: ISO 11127-1-1993; ISO 11127-2-1993; ISO 11127-3-1993; ISO 11127-4-1993; ISO 11127-5-1993; ISO 11127-6-1993; ISO 11127-7-1993
Adopted Standard: ISO 11126-6-1993, IDT
Regulation (derived from): National Standard Approval Announcement 2011 No.23
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the use of iron slag abrasive blast cleaning particle size range, apparent density, Mohs hardness, moisture, flooding the electrical conductivity and the content of water-soluble chloride solution. Requirements specified in this section apply only to not use too abrasive, does not apply to the use of too abrasive. Test methods for non-metallic blast cleaning abrasives see the various parts of ISO 11127.

GB/T 17850.6-2011: Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 6. Iron furnace slag ICS 25.220.10 A29 National Standards of People's Republic of China Before application of paints and surface treatment of steel Technical requirements for non-metallic blast - cleaning abrasives Part 6. Iron furnace Part 6. Ironfurnaceslag (ISO 11126-6.1993, IDT) Issued on. 2011-12-30 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 17850 "steel substrates before application of paints and non-metallic blast - cleaning abrasives" is divided into the following sections. --- Part 1. introduction and classification; --- Part 2. silica sand; --- Part 3. Copper refinery slag; --- Part 4. Coal furnace slag; --- Part 5. Nickel refinery slag; --- Part 6. Iron furnace; --- Part 7. Fused aluminum oxide; --- Part 8. Olivine sand; --- Part 9. Cross stone; --- Part 10. garnet; --- Part 11. Special steel slag sand. This section GB/T 17850 Part 6. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 11126-6.1993 "before application of paints and surface treatment of steel mill blast - cleaning nonmetallic Material technology - Part 6. Iron furnace. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 17849-1999 steel substrates before application of paints and non-metallic blast - cleaning abrasives Test Method (eqv ISO 11127-1 ~ 11127-7.1993). This part made the following editorial changes. --- Is clearly visible, in Article 6.1 adds two numbers. This part is proposed by the China State Shipbuilding Corporation. This part of the National Standardization Technical Committee before painting and metal surface treatment and painting processes Technical Committee paint pigment (SAC / TC5/SC6) centralized. This section drafted by. China State Shipbuilding Corporation eleventh Institute, Technical and Economic Research Institute of China Shipbuilding Industry. The main drafters of this section. Fu Jianhua, Jiang Feng, Song Yanyuan. Before application of paints and surface treatment of steel Technical requirements for non-metallic blast - cleaning abrasives Part 6. Iron furnace Warning. For the surface treatment used equipment, materials and abrasive, if not careful, may be hazardous. Many countries in the use of During or after use (waste management) that the presence of hazardous materials and abrasives such as. free silicon, carcinogenic or toxic substances, provisions are made. Therefore, compliance with these requirements. It is important to ensure that appropriate guidance be given and all precautions required to be implemented.

1 Scope

GB/T 17850 provisions of this part of the iron-smelting slag blast - cleaning abrasive particle size range, the apparent density, Mohs hardness, containing Water, flooding the electrical conductivity and the content of water-soluble chloride solution. The requirements of this provision apply only to non abrasive used, does not apply to used abrasive. Test methods for non-metallic blast - cleaning abrasives found in various parts of ISO 11127. Note 1. The world standard reference generally relevant non-metallic abrasives see Appendix A. Note 2. Although this section to meet the requirements of special steel surface treatment developed, but these features provisions generally apply to the use of blast cleaning Surface or parts of other materials processing technology. These provisions have been in ISO 8504-2.20001) "before application of paints and surface treatment of steel surface Processing methods - Part 2. Abrasive blast clean-up "below. 1) The standard ISO 11126-6.1993 for ISO 8504-2.1992. GB/T 18839.2-2002 to modify the use of ISO 8504-2.2000.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 11127-1.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 1. Sampling (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelatedproducts-Testmethods fornon-metalicblast-cleaningabrasives-Part 1. Sampling) ISO 11127-2.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 2. Determination of particle size distribution (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelated products-Testmethodsfornon-metalicblast-cleaningabrasives-Part 2. Determinationofparticle sizedistribution) ISO 11127-3.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 3. Determination of apparent density (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelatedproducts- Testmethodsfornon-metalicblast-cleaningabrasives-Part 3. Determinationofapparentdensity) ISO 11127-4.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 4. By water glass slide test to assess hardness (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelated products-Testmethodsfornon-metalicblast-cleaningabrasives-Part 4. Assessmentofhardnessby aglassslidetest) ISO 11127-5.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 5. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17850.6-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17850.6-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17850.6-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17850.6-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.