Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 17561-1998 PDF English

US$760.00 · In stock · Download in 9 seconds
GB/T 17561-1998: Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 17561-1998760 Add to Cart Auto, 9 seconds. Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones

Similar standards

GB/T 45715.2   GB/T 25102.7   GB/T 14471   GB/T 12060.21   

GB/T 17561-1998: Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17561-1998
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 33.160.60 M 72 idt IEC 1043.1993 Instruments for the Measurement of Sound Intensity – Measurement with Pairs of Pressure Sensing Microphones Issued on: NOVEMBER 10, 1998 Implemented on: JULY 1, 1999 Issued by. State Bureau of Quality and Technical Supervision

Table of Contents

Foreword... 3 IEC Foreword... 4 Introduction... 5 1 Scope... 6 2 Normative References... 6 3 Definitions... 7 4 Grades of Accuracy... 10 5 Reference Environmental Conditions... 10 6 Sound Intensity Processors. Requirements... 11 7 Sound Intensity Probes. Requirements... 14 8 Sound Intensity Instruments. Requirements... 18 9 Power Supplies. Requirements... 18 10 Sound Intensity Probe Calibrators. Requirements... 18 11 Sound Intensity Processors. Performance Verification... 19 12 Sound Intensity Probes. Performance Verification... 22 13 Calibrators. Performance Verification... 24 14 Field Calibration and Checks... 26 15 Marking and Instruction Manuals... 26 Annex A (Normative) Periodic Verification Procedures... 29 Annex B (Informative) Sound Intensity Processors Employing Auto-Ranging... 31 Annex C (Informative) Sound Intensity Processors based on DFT Analyzers Converting Narrow Bands to Octave or One-Third Octave... 32 Annex D (Informative) RC Networks for Generating Known Phase Shifts... 34 Annex E (Informative) Dynamic Capability Index... 36

Foreword

This Standard was formulated according to the international standard IEC 1043 Electroacoustics – Instruments for the Measurement of Sound Intensity – Measurement with Pairs of Pressure Sensing Microphones (First Edition) 1993-12.The technical contents are equivalent with the international standard IEC 1043.The formulation principle shall follow GB/T 1.1-1993 Directives for the work of standardization - Unit 1.Drafting and presentation of standards - Part 1.General rules for drafting standards, so that adapt to the requirements for international trade, technical and economic exchanges. The Annex A of this Standard is normative. The Annexes B, C, D, and E of this Standard are informative. This Standard was proposed by the Ministry of Electronics Industry of the People’s Republic of China. This Standard shall be under the jurisdiction of National Technical Committee on Electroacoustics and Audiovisual Equipment of Standardization Administration of China. Drafting organization of this Standard. The Third Research Institute of the Ministry of Electronics Industry Chief drafting staffs of this Standard. Pan Yuewu, Li Huan, Luan Lizhu, and Fu Xiaoling. Instruments for the Measurement of Sound Intensity – Measurement with Pairs of Pressure Sensing Microphones

1 Scope

The primary purpose of this Standard is to ensure the accuracy of measurements of sound intensity applied to the determination of sound power in accordance with GB/T 16404.To meet the requirements of GB/T 16404, instruments are required to analyze the sound intensity in one- third octave or octave bands, and optionally to provide A-weighted band levels. They are also required to measure sound pressure level in addition to sound intensity level to facilitate the use of the field indicators described in GB/T 16404. This Standard only applies to instruments which detect sound intensity by pairs of spatially separated pressure sensing microphones. This Standard specifies performance requirements for instruments used for the measurement of sound intensity, and their associated calibrators. The requirements are intended to reduce to a practical minimum any differences in equivalent measurements made using different instruments, including instruments comprising probes and processors from different manufacturers.

2 Normative References

The following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard. At the time of publication, the editions indicated are valid. All standards are subject to revision. The parties who are using this Standard shall explore the possibility of using the latest version of the following standards. GB/T 3241-1998 Octave-band and fractional-octave-band filters (eqv IEC 1260.1995) GB/T 3785-1983 Electric, sonic properties and measuring methods for sound level meters GB/T 15173-1994 Sound calibrators (eqv IEC 1014.1989) GB/T 16404-1996 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1.Measurement at discrete points (eqv ISO 9614-1.1993) ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 17561-1998 be delivered?Answer: The full copy PDF of English version of GB/T 17561-1998 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 17561-1998_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17561-1998_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17561-1998 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 17561-1998?

A step-by-step guide to download PDF of GB/T 17561-1998_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17561-1998".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9