GB/T 17548-2008 English PDFUS$1034.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17548-2008: Information technology -- Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards Status: Valid GB/T 17548: Historical versions
Basic dataStandard ID: GB/T 17548-2008 (GB/T17548-2008)Description (Translated English): Information technology -- Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L74 Classification of International Standard: 35.060 Word Count Estimation: 52,523 Date of Issue: 2008-07-18 Date of Implementation: 2008-12-01 Older Standard (superseded by this standard): GB/T 17548-1998 Quoted Standard: GB/T 11457-2006; GB/T 17178.1-1997; GB/T 27025-2008 Adopted Standard: ISOIEC 13210-1999, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the self-ballasted definition of cold cathode fluorescent lamps, models and key performance parameters naming rules, requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to the rated voltage of 220V, frequency of 50Hz, rated at 30W or less, using the screw/bayonet lamp, lighting in indoor and outdoor applications, and the cap, lighted the lamp and start electronic components integrated into the self- ballasted cold cathode fluorescent lamp (hereinafter referred to as light). GB/T 17548-2008: Information technology -- Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Information technology. Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards ICS 35.060 L74 National Standards of People's Republic of China GB/T 17548-2008/ISO /IEC 13210.1999 Replacing GB/T 17548-1998 POSIX standard compliance Test methods specifications and test method implementation Requirements and Guidelines (ISO /IEC 13210.1999, IDT) Posted 2008-12-01 2008-07-18 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Overview 1 1.1 Scope 1 1.2 Normative references 1 1.3 Compliance Guidelines 1 1.4 IUT conformity assessment 2 2 Terminology and general requirements 3 2.1 Conventions 3 2.2 Terms and Definitions 5 3 assertion definition, types, syntax and structure 8 3.1 Introduction 8 3.2 generic assertions structure 9 3.3 assertion type and structure 10 14 3.4 Macro 14 3.5 summary 4 Test Results Code 15 4.1 Introduction 15 4.2 Test Method Implementations 15 4.3 Test methods - 16 5 17 test reports 5.1 Test Report 17 5.2 Compliance Documentation (CD) review 17 6 contour 17 6.1 Defining 17 6.2 in line with the outline 18 6.3 Conformity Assessment 18 7 guide for test levels and the level of complexity of the 20 7.1 Introduction 20 7.2 Test Level 21 7.3 Complexity Level 21 7.4 Conclusion 22 8 Guidelines for the preparation assertion 22 8.1 Introduction 22 8.2 Identification Prerequisites 25 8.3 write < Test_Text> 27 Other 29 8.4 assertion type 31 8.5 Macro Comprehensive Example 9 32 GB/T 17548-2008/ISO /IEC 13210.1999 9.1 The test results allow code specifications 32 Appendix A (normative) References 42 Annex B (informative) Basic theory and notes 43 B. 1 Overview 43 B. 2 Definitions and general requirements 43 B. Definition 3 assertions, type, grammar and structure 44 B. 4 Test Results Code 45 B. 5 46 test reports B. 6 outline file 46 B. 7 Test and level of complexity of the guide 46 B. 8 Guidelines for the preparation assertion 47 GB/T 17548-2008/ISO /IEC 13210.1999ForewordThis standard is identical with ISO /IEC 13210.1999 "Information Technology POSIX Conformance test specifications and test methods party Method to achieve the requirements and guidelines. " This standard is the International Standard in technical content is exactly the same, only made some editorial changes and Appendix B of the clauses by According to the order have been adjusted. This standard replaces GB/T 17548-1998, compared with the 1998 version of the standard, this standard has undergone major changes are as follows. --- Standard name changed to "POSIX standards compliance test methods specifications and test method implementation requirements and guidance"; --- Reference standard GB national standard terminology in software engineering/T 11457-2006 instead of the original text of IEEEStd729, its He cited standards are changed to correspond to national standards; --- Increasing the types of assertions, and type of each assertion in terms of structure, grammar, etc. were introduced; --- Increased testing methods to achieve specification requirements and test methods test results description of the code; --- Increasing the contour test methods and content of macro aspects; --- Increasing the sample is written in C and Ada language assertions. Appendix A of this standard and Appendix B is an informative annex. The standard proposed by the People's Republic of China Ministry of Information Industry. This standard by the National Information Technology Standardization Technical Committee. This standard was drafted. China Electronics Standardization Institute. The main drafters of this standard. Li Haibo, Feng Hui, Yang Ying, Xie Qian, Zhang Yong. This standard replaces the standards previously issued as follows. --- GB/T 17548-1998. GB/T 17548-2008/ISO /IEC 13210.1999 POSIX standard compliance Test methods specifications and test method implementation Requirements and Guidelines1 Overview1.1 Scope This standard applies to the POSIX standard compliance test method development and use, but also for the development of other application programming interface specification And use. This standard is intended for test methods specifications and test method of developers and users. Users of this standard include. --- Assertion writers. Formatting assertion; --- Assertion test writers. Write assertion test; --- Test suite or system purchasers. interpretation of the results of the test suite. This standard aims to measure an Implementation Under Test (IUT) POSIX compliant developed assertions and associated test methods may be Righteous requirements and provide guidance. Test method implementation including compliance testing software (CTS), POSIX conformance test procedures (CTP), and Compliance Documentation (CD) review. For a standard implementation of the POSIX compliance tests include tests that achieve the claimed ability to meet the requirements of this standard and behavior, which These test methods are designed to provide a rational and realistic assurance, so that to achieve compliance with this standard. But the use of these test methods are not supported Paul an implementation will certainly comply with this standard. To ensure that such compliance usually requires exhaustive testing (see 7.2.1), while not exhaustive test On technically or economically it is not. 1.2 Normative references The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. Who does not note date reference documents, the latest versions apply to this standard. GB/T 11457-2006 Information technology - Software engineering terminology GB/T 17178.1-1997 Information technology - OSI conformance testing methodology and framework - Part 1. Basic Concepts (Idt ISO /IEC 9646-1.1994) GB/T 27025-2008 testing and calibration laboratories General requirements (idt ISO /IEC 17025.2005) 1.3 Compliance Guidelines Test Method for the specification and implementation claiming compliance with this standard shall comply with all the requirements contained in the standard, "shall" indicates the declaration must be met And requirements. This standard as a guide or a way to identify the material are either recommended or optional, such as all the examples, notes and footnotes. 1.3.1 Test Method Regulatory Compliance Guidelines A test method conforming to this standard specification shall contain all of the following criteria. --- When applicable, use of this standard, required definitions, types, syntax and structure (see Chapter 3); --- Use a test result codes specified in this standard for test results defined in this standard (see Chapter 4); GB/T 17548-2008/ISO /IEC 13210.1999 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17548-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17548-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17548-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17548-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17548-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17548-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
