GB/T 17497.1-2012 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17497.1-2012: Decorative products by flexographic printing -- Part 1: Paper Status: Valid GB/T 17497.1: Historical versions
Basic dataStandard ID: GB/T 17497.1-2012 (GB/T17497.1-2012)Description (Translated English): Decorative products by flexographic printing -- Part 1: Paper Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A17 Classification of International Standard: 37.100.01 Word Count Estimation: 11,18 Older Standard (superseded by this standard): GB/T 17497-1998 Quoted Standard: GB/T 2828.1; GB/T 18722; GB/T 19437; GB/T 23649; CY/T 3 Regulation (derived from): National Standards Bulletin No. 42 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the paper type flexo printed decoration requirements, test methods, inspection rules, marking, packaging, transportation, storage and so on. This section applies to flexographic printing paint decorating paper, uncoated paper print GB/T 17497.1-2012: Decorative products by flexographic printing -- Part 1: Paper---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS37.100.01 A17 National Standards of People's Republic of China Partial replacement of GB/T 17497-1998 Flexographic printing and decorating Part 1. sheet Decorativeproductsbyflexographicprinting-Part 1. Paper Issued on. 2013-06-01 2012-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 17497 "flexographic decorating printed" is divided into three parts. --- Part 1. sheet; --- Part 2. Plastic and metal foils; --- Part 3. corrugated board class. This is Part 1 GB/T 17497 in. Rules in this section in accordance with GB/T 1.1-2009 given draft. This portion instead of GB/T 17497-1998 "flexographic decorating printed matter", compared with the GB/T 17497-1998, the main technical Requested changes are as follows. --- Remove belonging to process control "solid density" (see 1998 edition 4.2); --- Remove belonging to process control "dot gain" (see 1998 edition 4.6); --- On the "Indian face look" made appropriate modifications (see 51, 1998, version 4.1.); --- On the "overprint error" made the appropriate changes (see 52, 1998. Version 4.4.); --- On the "same batch color difference" made appropriate modifications (see 531, 1998, version 4.5.); --- On the "ink wear" any appropriate modifications (see 532, 1998, version 4.3.); --- Added "India is dirty point limit" requirement (see 5.1.1.4,5.1.2.4); --- Increased "hot stamping and embossing graphic printing registration error" requirement (see 5.4); --- Increased "die size error" requirement (see 5.5). Please note that some of the content of this document may involve patent issuing authority of this document does not assume responsibility for the identification of these patents. This section proposed by the Press and Publication Administration. This part of the National Standardization Technical Committee printing (SAC/TC170) centralized. This section is drafted. Jiang Su Caihua Packaging Group Company, Wuhan flexo Honor Environmental Protection Technology Co., Shanghai East Prince Packing Co. The company, Three Gorges Project in Hubei Government Printing Co., Ltd., Luoyang one hundred Lin Wei Ink Co., Ltd., Xian De Xin Printing Machinery Co., Ltd., China National Light Industry Pack Loading and decoration printing products Shanghai Quality Supervision and Inspection Station, the Shanghai Quality Supervision, Inspection Station print, packaging and printing member of China Packaging Federation Council, China Printing Technology Association of flexo printing branch. The main drafters of this section. Xia Jialiang, Dennis Chan, Sun Yi column, once into the sea, Wu Tiejun, Li Xinsheng, Zhengshao Nan, Ren Xingchun, Chen Xiang Qi Gong Ren chou. This part of the standard replaces the previous editions are. --- GB/T 17497-1998. Flexographic printing and decorating Part 1. sheet1 ScopeThis section GB/T 17497 provisions of the decorating sheet flexographic printing requirements, test methods, inspection rules, marking, packaging, Transport, storage and so on. This section applies to flexographic and decoration printing coated paper, uncoated paper prints.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 18722 printing technology reflection density measurement and color measurement applications in the printing process control GB/T 19437 printed image printing technology - Spectral measurement and colorimetric computation GB/T 23649 printing technology process control printing reflection densitometer optics, geometry and surveying requirements CY/T3 evaluate color lighting and viewing conditions3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Flexographic printing flexographicprinting Elastic letterpress printing plate transfers the ink to the printing on the substrates. [GB/T 9851.1-2008, the definition 5.10] 3.2 Stamping hotfoil-stamping On paper, cardboard, paper, coating class and other items, will die by hot stamping material transfer process has been hot on the matter. [GB/T 9851.7-2008, the definition 4.7] 3.3 Embossing embossing Mold the convex-concave pattern or texture embossing process on printed materials. [GB/T 9851.7-2008, the definition 4.2] 3.4 Glazing coating Bright material in process printing surface coating transparent. [GB/T 9851.7-2008, the definition 4.5] 3.5 Film filmlaminating The adhesive-coated plastic film laminated to the surface of the printing process. [GB/T 9851.7-2008, the definition 4.6] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17497.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 17497.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17497.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17497.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17497.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17497.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
