GB/T 17456.1-2025 English PDFGB/T 17456.1: Historical versions
Basic dataStandard ID: GB/T 17456.1-2025 (GB/T17456.1-2025)Description (Translated English): Ductile iron pipes, fittings and accessories - External zinc-based coating - Part 1: Metallic zinc and zinc alloy with finishing layer Sector / Industry: National Standard (Recommended) Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 17456.1-2009 GB/T 17456.1-2009: Ductile iron pipes -- External zinc-based coating -- Part 1: Metallic zinc with finishing layer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Ductile iron ipes External zinc-based coating Part 1. Metallic zinc with finishing layer ICS 23.040.10 H48 National Standards of People's Republic of China GB/T 17456.1-2009/ISO 8179-1.2004 Replacing GB/T 17456-1998 Ductile iron pipe outer surface of the zinc coating Part 1. with metal finishing zinc coating layer (ISO 8179-1.2004, IDT) Posted 2009-10-30 2010-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 17456 "ductile iron pipe outer surface of the zinc coating" is divided into the following two parts. --- Part 1. metallic zinc coating with finishing layer; --- Part 2. zinc-rich paint coating with finishing layer. This section is GB/T Part of 117,456. This section identical with ISO 8179-1.2004 "ductile iron pipe outer surface of the zinc coating - Part 1. with metal finishing zinc coating layer Layer "(in English). For ease of use, this section made the following editorial changes. a) 'this International Standard' to replace the word 'this section'; b) with a decimal point '. 'Instead of a comma as the decimal point,' '; c) Remove the International Standards Preface; d) Normative references to international standards in line with the technical content of the corresponding national standards, abolished the ISO 7186.1996. This Part replaces GB/T 17456-1998 "ductile iron pipe outer surface sprayed zinc coating." This portion of the GB/T 17456-1998 main changes are as follows. --- Purity zinc coating material is from 99% to 99.99%; --- Increased the average thickness of the coating dry finish should not exceed 250μm; --- Increased the determination of the finishing coat dry film thickness. This part is proposed by the China Iron and Steel Association. This part of the National Steel Standardization Technical Committee. This section is responsible for drafting unit. Xinxing Ductile Iron Pipes Co., Ltd., Metallurgical Industry Information Standards Institute. The main drafters of this section. leaves and Wei, Wang Lihui, Li Jun, Yasuhiko week, Liyan Ning, Huang Ying. This part of the standard replaces the previous editions are. --- GB/T 17456-1998. GB/T 17456.1-2009/ISO 8179-1.2004 Ductile iron pipe outer surface of the zinc coating Part 1. with metal finishing zinc coating layer1 ScopeGB/T 17456 provisions of this part of the ductile iron pipe (hereinafter referred to as ductile iron pipe) and the outer surface of the metallic zinc coating finish coating technology Surgery requirements and determination of thickness. This section applies to zinc metal coating the outer surface of the ductile iron pipe with a finishing layer.2 Normative referencesThe following documents contain provisions which, through reference GB/T 17456 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 13295 Water and gas pipes with ductile iron pipes, fittings and accessories (GB/T 13295-2006, ISO 2531.1998, MOD) ISO 2808 paint and lacquer film thickness measurement method of3 MaterialsThe coating material should be metal, zinc content of not less than 99.99%, finishing the coating material is asphalt coating or synthetic resin compatible with zinc coating.4 zinc coating4.1 ductile iron pipe surface state Ductile iron pipe surface should be dry, no dust, no attachment is not strong particles or foreign substances, such as oil or grease. The outer surface of the ductile iron pipe sprayed zinc in oxidized or sandblasting the surface after grinding or spray zinc, decided by the manufacturer. 4.2 coating method Zinc coating is applied by thermal spraying process, namely by means of a spray gun and zinc heated to a molten state to form droplets sprayed onto the outer surface of ductile iron pipe. Design and construction spraying equipment not included in the scope of this standard. 4.3 coating requirements Zinc coating shall cover the outer surface of the ductile iron pipe, no nudity and attachment is not strong and other defects. As long as the quality of the zinc coating to meet the requirements of 4.4, allowed a spiral appearance. Because zinc coating damage caused by the operation, as long as each square meter area in cumulative lesion area as no more than 5cm2 and a single damage zone Domain of one dimension not less than 5mm, the coating quality can be considered qualified. Larger area of \u200b\u200bdamage should be repaired 4.5. 4.4 coating quality The average zinc coating quality by measuring not less than 6.1 130g/m2, a local minimum of not less than 110g/m2. Producers should visually inspect each ductile iron pipe coating condition and uniformity, and should be 6.1 to zinc coating quality on a regular basis measuring. 4.5 coating repair The allowable range of the area not to spray the area, such as regional and coating the degree of injury is covered through the test piece exceeds 4.3 shall be repair. After repair coating shall meet the requirements of 4.3 and 4.4. Choose any of the following methods to repair. GB/T 17456.1-2009/ISO 8179-1.2004 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17456.1-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 17456.1-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17456.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17456.1-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17456.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17456.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
