GB/T 17362-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17362-2008: Analysis method for gold products with X-ray EDS in SEM
Status: Valid

GB/T 17362: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17362-2008	189	Add to Cart	3 days	Analysis method for gold products with X-ray EDS in SEM	Valid
GB/T 17362-1998	239	Add to Cart	2 days	Nondestructive method of X-ray EDS analysis with SEM for gold jewelry	Obsolete

Similar standards

GB/T 12519   GB/T 25929   GB/T 25930   GB/T 17365   GB/T 17359   GB/T 17360   

Basic data

Standard ID: GB/T 17362-2008 (GB/T17362-2008)
Description (Translated English): Analysis method for gold products with X-ray EDS in SEM
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N53
Classification of International Standard: 71.040.99
Word Count Estimation: 8,817
Date of Issue: 2008-09-18
Date of Implementation: 2009-05-01
Older Standard (superseded by this standard): GB/T 17362-1998; GB/T 17723-1999
Quoted Standard: GB/T 4930
Regulation (derived from): Announcement of Newly Approved National Standards No. 16 of 2008 (No. 129 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the configuration of the scanning electron microscope with an X- ray spectrometer on the gold products nondestructive quantitative analysis of chemical composition of the methods and technical requirements.

GB/T 17362-2008: Analysis method for gold products with X-ray EDS in SEM

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Analysis method for gold products with X-ray EDS in SEM ICS 71.040.99 N53 National Standards of People's Republic of China Replacing GB/T 17362-1998, GB/T 17723-1999 Gold products SEM X-ray EDS analysis Posted 2008-09-18 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 17362-1998 "gold jewelry SEM X-ray spectroscopy methods" and GB/T 17723- 1999 "X-ray spectroscopy measurements coating composition of gold products," two standards. This standard and GB/T 17362-1998 and GB/T 17723-1999 standard compared to the two main changes are as follows. --- The scope of merged, so that it can be applied to different respective gold content of K gold articles made of gold and gold-bearing surface Determination of coating gold-plated products coating composition in both cases; --- The two relevant sections of the original standard, by deleting duplicate part, different parts finishing formation of a new text; --- Deletion of GB/T 17723 in the "Terminology" section; --- Original standard "jewelry" be replaced by "products"; --- Provisions of this standard no longer optional calibration procedure, the operator can be based on the actual analysis of samples, use their own choice; --- Emphasis on the determination of the coating products, the operating voltage of choice, which is the key component of the coating can measure accurate. Appendix A of this standard is a normative appendix. This standard by the National Standardization Technical Committee microbeam analysis made. This standard by the National Standardization Technical Committee microbeam analysis. This standard was drafted. Beijing Nonferrous Metal Research Institute, Beijing Institute of Geology for Nuclear Industry Corporation, Beijing Iron and Steel Research Institute. The main drafters of this standard. Liu Ansheng, Zhang Yi, Mao Yunjing. This standard replaces the standards previously issued as follows. --- GB/T 17362-1998; --- GB/T 17723-1999. Gold products SEM X-ray EDS analysis

1 Scope

1.1 standard specifies the configuration used in the scanning electron microscope X-ray spectrometer for gold products nondestructive quantitative analysis of the chemical composition of the party Law and technical requirements. 1.2 This standard applies to the determination of various gold products and gold products K chemical composition, but also for a variety of gold, gold, gold forging system Product surface gold layer thickness of more than 0.2μm, 3μm below the surface layer of the chemical composition of non-destructive measurement. 1.3 This standard applies to gold products in the mass fraction of 0.1% to 100% of the quantitative elemental analysis. This standard also applies to the electrical configuration X-ray analyzer sub-probe spectroscopy analysis on gold products.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4930 electron probe microanalysis standard specimen General technical requirements

3 Analysis Method Principle

In the scanning electron microscope, when the electron beam has a certain energy and focused bombardment sample, the characteristics of each element are emitted irradiation zone X-rays, using semiconductor detectors for different energy dispersive X-rays characteristic of the received signal is amplified, processed and divided Analysis of obtained energy distribution characteristics of each element X-ray peak intensity of its value, and then with the corresponding X-ray spectrum of a standard sample of Ratio measurement, calculation and correction process, the final test sample can be obtained by the chemical composition of the quantitative analysis. The coating sample, by changing the scanning electron microscope operating voltage, thereby changing the incident electrons in a sample of the penetration depth to obtain not Elements are present within the same depth information. Under the same experimental conditions, the elements and the corresponding elements in the standard sample with the presence of measuring coating Characteristic X-rays, by contrast, is obtained after the correction corresponding to the electronic elements within the depth of penetration of the coating composition of the quantitative analysis.

4 instruments and materials

4.1 Scanning electron microscope. 4.2 X-ray spectrometer. 4.3 ultrasonic cleaner. 4.4 ethanol, acetone. 4.5 hair dryer. 4.6 K gold standard set.

5 standard samples

5.1 gold products generally contain only gold, silver, copper three elements, in some cases, may also contain zinc, nickel, cadmium and other elements. Selection principle 5.2 standard sample. Recommended standard sample GB/T 4930 electron probe microanalysis standard specimen General technical conditions Goods, gold and silver using the following standard. a) gold standard; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17362-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17362-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17362-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17362-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 17362-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17362-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.