GB/T 1730-2007 English PDFUS$389.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1730-2007: Procedures for fire protection standardization Status: Valid GB/T 1730: Historical versions
Basic dataStandard ID: GB/T 1730-2007 (GB/T1730-2007)Description (Translated English): Procedures for fire protection standardization Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G50 Classification of International Standard: 87.040 Word Count Estimation: 15,186 Date of Issue: 2007-09-11 Date of Implementation: 2008-04-01 Older Standard (superseded by this standard): GB/T 1730-1993 Quoted Standard: GB/T 308; GB/T 3186-2006; GB/T 9271; GB 9278; GB/T 13452.2; GB/T 20777-2006; ASTM D4366-1995 Adopted Standard: ISO 1522-1998, MOD Regulation (derived from): China Announcement of Newly Approved National Standards No. 10 of 2007 (No. 110 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides a single-layer or multi-layer paints, varnishes and related products, coatings Pendulum damping test on the standard conditions. This standard is Paints, varnishes and related products, sampling and test methods series standards. GB/T 1730-2007: Procedures for fire protection standardization---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Procedures for fire protection standardization ICS 87.040 G50 National Standards of People's Republic of China Replacing GB/T 1730-1993 Paints and varnishes - Pendulum damping test (ISO 1522.1998, MOD) Posted 2007-09-11 2008-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts ISO 1522.1998 "Paints and varnishes - Pendulum damping test" (in English). This standard is based on ISO 1522. "Paints and varnishes - Pendulum damping test" redraft 1998. The standard in the use of international standards complements these technical differences between a single vertical line identifies the page in terms of which they are involved Margin. It gives a list of the technical differences and their reasons in Appendix E for reference. ISO 1522.1998 in the technical survey Incorrect content is included in this standard, these errata content with vertical double identity in which they are involved in terms of margin. This standard and ISO 1522. compared to 1998 (E), the main technical differences are. --- Koenig and the Po Sazi pendulum damping test rod collectively referred to as "A Law"; the portion identical with ISO 1522.1998; --- Increasing the "B method --- double pendulum rod damping test" (see Chapter 6 of this standard); --- Added "Appendix D (normative) double pendulum calibration"; --- The test method used are used in existing national standards, some of which method to modify the system using the appropriate international standards; --- Using identical with ISO 15528. the national standard GB 2000/T 3186-2006. ISO 15528.2000 is ISO 1512.1991 and ISO 842. 1984 revision merge together; --- Deleted international standards foreword. This standard replaces GB/T 1730-1993 "Determination of film hardness Pendulum damping test." This standard compared with GB/T 1730-1993, the main technical differences are. --- A law explicitly Po Sazi pendulum damping time (430 ± 10) s; --- A method to increase the applicable range of substrates, such as metal plates; --- A method for calculating the coating canceled damping time; --- A method to increase the precision of the measurement results of the requirements; --- B method, the original standard double pendulum hardness defined content (4.1) included in 6.4.4; --- B standard in the original law on the instrument before testing the adjustment contents (4.4.1,4.4.2,4.4.4) included in Appendix D; --- B Law canceled pendulum initial position "5.5 °" requirement has more than 5 ° from the appropriate location to start; --- Press B clear determination, to be on the same parallel test board measured twice, take the average of the two measured values; --- Increasing the calibration of the instrument, namely Appendix B, Appendix C, Appendix D; --- Increased this standard and ISO 1522.1998 technical differences and their list of reasons, namely Appendix E. The Standard Appendix A, Appendix B, Appendix C, Appendix D is a normative appendix, Appendix E is an information appendix. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee paint pigment. This standard drafting units. China National Chemical Construction Corporation, Changzhou coating Chemical Research Institute. The main drafters of this standard. Zhou Wenpei. This standard was first published in 1988 and revised in 1993 for the first time, this is the second revision. The standard commission and the National Standardization Technical Committee paint pigment responsible for the interpretation.IntroductionKoenig (Knig) swing, Posa Zi (Persoz) and double pendulum swing has the same principle --- pendulum contacting the softer surface coating its pendulum Amplitude attenuation faster, but in three dimensions, and swing cycle swings terms vary. Interaction between the rocker and the film is complex and depends on the elastic and viscoelastic coating two properties, and the resulting three test methods Impossible to establish the relationship between the general result. Measuring the damping time prescribed only allowed to use one type of pendulum. As to a specific purpose (use) the pendulum has the advantage, the following conditions can be used as a guide. a) on the lower surface friction coefficient, Posa Zi (Persoz) pendulum may skid, which would invalidate the results; however, paints and clear Paint occasions this situation rarely occurs. b) It should be noted that the three instruments reflect the physical properties of the coating of the sensitivity of their environment, and therefore, the test should be in control of temperature And humidity, and under no flow. Film thickness and substrate properties may also affect the damping time. Paints and varnishes - Pendulum damping test1 ScopeThis standard is one of the series of standard sampling and testing methods for paints, varnishes and related products. This standard specifies the standard conditions Pendulum damping test on a single or multiple layers of paint, varnish coatings and related products.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 308 Rolling Ball (GB/T 308-2002, ISO 3290.1998, NEQ) GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT) GB/T 9271 Paints and varnishes - Standard panels for (GB/T 9271-1988, eqv ISO 1514. 1984) GB 9278 paint sample conditioning and testing temperature and humidity (GB 9278-1988, eqv ISO 3270. 1984, Paintsand varnishesandtheirrawmaterials-Temperaturesandhumiditiesforconditioningandtesting) GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-1992, eqv ISO 2808. 1974) GB/T 20777-2006 Paints and varnishes examination and preparation of samples (ISO 1513.1992, IDT) ASTMD4366.1995 Pendulum damping test with organic coating Hardness Test Method3 Supplementary information neededFor any particular application, the test methods specified in this standard needs to improve with additional information. Supplementary information in the accompanying content A record listed. Principle 4 Static coating surface of the pendulum starts swinging, swinging with a predetermined period measured in value represents the amplitude of the damping time decay. Block Nigeria shorter the time, the lower the hardness. This method is divided into A and B method method, A method for the Koenig pendulum rod and Posa Zi damping test, B double pendulum method Rod damping test. 5 and Posa Zi Koenig pendulum rod damping test (A method) 5.1 Instrument 5.1.1 pendulum Two kinds of pendulum described below are included opening frame with a rail connection in the bar below to embed two balls as a fulcrum, in Forming a bottom frame pointer. Two kinds of differences in the shape of the pendulum, the quality of the swing time and other details, see 5.1.1.1 and 5.1.1.2 Described. Pendulum should avoid drafts and vibrations, it is recommended to use a protective cover. 1) HRC = Rockwell hardness. 2) HV = Vickers hardness was measured according to DIN50133. 5.1.1.1 Koenig pendulum (see Fig. 1) to the diameter (5 ± 0.005) mm, spacing of the balls (30 ± 0.2) mm, hardness HRC1) (63 ± 3) or (1600 ± 32) HV302) two separate ball bearings being supported by the slide hammer and the vertical rod connected to the crossbar ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1730-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 1730-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1730-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1730-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 1730-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1730-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
