GB/T 17248.1-2022 English PDFUS$734.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17248.1-2022: Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions Status: Valid GB/T 17248.1: Historical versions
Basic dataStandard ID: GB/T 17248.1-2022 (GB/T17248.1-2022)Description (Translated English): Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A59 Word Count Estimation: 37,371 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17248.1-2022: Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions ICS 17.140 CCSA59 National Standards of People's Republic of China Replacing GB/T 17248.1-2000 Noise emitted by acoustic machines and equipment Determination of work locations and other designated locations Guidelines for the use of basic standards for emission sound pressure levels (ISO 11200.2014, IDT) 2022-03-09 Released 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 Emission sound pressure level at working position and other designated positions9 5 ISO 11201~ISO 11205 gives an overview of the method for determining the emission sound pressure level at the working position and other specified positions 10 6 Selection of the most suitable method in ISO 11201~ISO 11205 14 7 Choice of specified location 19 8 Treatment of measurement uncertainty in ISO 11201, ISO 11202 and ISO 11204 19 Appendix A (Informative) Some Guidelines for Test Site and Environmental Correction K221 Appendix B (Informative) Example Analysis 22 Reference 32 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 1 of GB/T 17248 "Noise emitted by acoustic machines and equipment". GB/T 17248 has been released to Lower part. --- Part 1.Guidelines for the use of basic standards for determining emission sound pressure levels at working positions and other designated positions; --- Part 2.Approximate free-field determination of working positions and other specified positions with negligible environmental correction above a reflective surface emission sound pressure level; --- Part 3.Using approximate environmental corrections to determine the emission sound pressure level at the working position and other specified positions; --- Part 4.Determine the emission sound pressure level at the working position and other designated positions by the sound power level; --- Part 5.Determination of emission sound pressure levels at working positions and other designated positions using accurate environmental corrections; --- Part 6.Sound Intensity Method Engineering method for on-site determination of emission sound pressure levels at work locations and other designated locations. This document replaces GB/T 17248.1-2000 "Determination of noise emitted by acoustic machines and equipment at work locations and other designated locations" Guidelines for the Use of Basic Standards for Emission Sound Pressure Levels, compared with GB/T 17248.1-2000, except for structural adjustments and editorial changes, the main technical The changes are as follows. --- Added terms and definitions (see Chapter 3); --- Changed the principles and procedures for selecting different measurement methods of emission sound pressure level (see Chapter 6, Chapter 4 of the.2000 edition); --- Added the sample analysis content of Appendix B (see Appendix B). This document is equivalent to ISO 11200.2014 "Determination of noise emitted by acoustic machines and equipment at work locations and other specified locations Guidelines for the Use of Basic Standards for Emission Sound Pressure Levels. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by the Chinese Academy of Sciences. This document is under the jurisdiction of the National Acoustic Standardization Technical Committee (SAC/TC17). This document was drafted by. Institute of Acoustics, Chinese Academy of Sciences, Tongji University, Zhejiang University of Science and Technology, Shenzhen Zhongya Electromechanical Industry Co., Ltd., Anhui Weiwei Shock Absorption and Noise Reduction Technology Research Institute, Hangzhou Aihua Intelligent Technology Co., Ltd., China Metrology Research Institute, Zhejiang University, Changsha Aobang Environmental Protection Industry Co., Ltd., Guangzhou Qijing Environmental Protection Technology Co., Ltd., Shanghai Environmental Science Research Institute, Qingdao University of Technology, Shanghai Xinhua Clean Environment Insurance Engineering Co., Ltd., Highway Research Institute of the Ministry of Transport, Beijing Labor Protection Research Institute. The main drafters of this document. Cheng Mingkun, Lv Yadong, Li Xiaodong, Yang Jun, Cheng Xiaobin, Liu Danxiao, Mao Dongxing, Yu Wuzhou, Li Zhengguang, Fang Qingchuan, Li Zhiyuan, Xiong Wenbo, He Longbiao, Niu Feng, Zhai Guoqing, Mo Jianyan, Zhou Jinli, Zhu Wenying, Liu Bilong, Wang Bing, Yuan Minxin, Li Xiaokuan, Xu Xin. The previous versions of this document and its superseded documents are as follows. ---First published in.2000 as GB/T 17248.1-2000; ---This is the first revision.IntroductionFor many users of machines and equipment, noise control is a requirement for the coordination of acoustic information between manufacturers, installers and users. main issues of effective communication. The relevant acoustic information is obtained from measurements. This information is mainly communicated by the manufacturer to the user. These measurements are only useful under specified measurement conditions, when specified acoustic quantities are obtained, and when standardized instruments are used. The two complementary quantities of sound power level and emission sound pressure level at a given location can be used to describe the acoustic emission of a machine or equipment. Describe the sound power level Standards for basic determination methods are ISO 3740[2], ISO 3741, ISO 3743 (all parts), ISO 3744, ISO 3745, ISO 3746 and ISO 3747 (determined by sound pressure level measurement) and ISO 9614-1, ISO 9614-2 and ISO 9614-3 (determined by sound intensity measurement). Book The document describes the consideration of the sound source under test in various possible situations (mobile machines, stationary machines, different test rooms, different instruments and A set of five series of standards describing different methods of determining the sound pressure level emitted by machinery and equipment under different working positions, etc. It is not the purpose of this series of standards to describe methods for measuring occupational noise exposure of workers; for methods of measuring occupational noise exposure, see ISO 9612[4]. The emission sound pressure level is used together with the sound power level for the designation of emission noise under specified conditions, verification of the designated value, different types and sizes Comparison of the emission noise of the mechanical equipment, comparison with the limit value specified in the procurement contract or regulations, and engineering to reduce the emission noise of the mechanical equipment work and prediction of noise exposure at a given location. Three of the standards in this series describe the method of directly measuring the emission sound pressure level in different test environments (GB/T 17248.2, GB/T 17248.3 and GB/T 17248.5), GB/T 17248.4 gives the method of measuring emission sound pressure level by sound power level, GB/T 17248.6 is a method for determining the emission sound pressure level based on the measured value of the sound intensity level. Usually these emission sound pressure levels are different from the sound pressure levels generated when the mechanical equipment is operating in its installation environment. At this time, the working position or its The sound pressure level at his specified location is affected by the environment. For practical reasons, the choice of the sound power level measurement criterion may differ from the emission sound pressure level The choice of measurement criteria is causal. It is best to choose criteria related to both noise emissions at the same time. In fact, GB/T 17248.2, GB/T 17248.3, GB/T 17248.4, GB/T 17248.5 and GB/T 17248.6 series of standards Usually used as the basis for standard noise test specifications (see 3.25). If the machine family under test has a specific noise test specification, use the specified test specifications. Familiarity with ISO 12001 [6] is required for drafting noise testing specification recommendations. Since there are many noise-related contents emitted by machines and equipment, GB/T 17248 "Noise emitted by acoustic machines and equipment" is based on different The same aspect is to be divided into 6 parts (corresponding to the series of standards ISO 11200~ISO 11205 respectively), as follows. --- Part 1.Guidelines for the use of basic standards for measuring sound pressure levels emitted at working positions and other designated positions. The purpose is to give this Basic definitions related to a series of standards, comparison of various measurement methods, and guidance on how to choose a measurement method. --- Part 2.Approximate free-field determination of working positions and other specified positions with negligible environmental correction above a reflective surface emission sound pressure level. The purpose is to give measurements over a reflective surface in an approximate free-field environment with negligible environmental corrections method. --- Part 3.Using approximate environmental corrections to determine the emission sound pressure level at the working position and other specified positions. The purpose is to give A measurement method corrected for the approximate environment. --- Part 4.Determine the emission sound pressure level at the working position and other specified positions by the sound power level. The purpose is to give a sound-based rate measurement method. --- Part 5.Using accurate environmental corrections to determine the emission sound pressure level at the working position and other specified positions. The purpose is to give A measurement method corrected for the exact environment. --- Part 6.Sound Intensity Method Engineering method for on-site determination of sound pressure levels emitted at working positions and other designated positions. The purpose is to give Field measurement method using sound intensity method. Noise emitted by acoustic machines and equipment Determination of work locations and other designated locations Guidelines for the use of basic standards for emission sound pressure levels1 ScopeThis document describes ISO 11201, ISO 11202, ISO 11203, ISO 11201, ISO 11202, ISO 11203, A framework for foundational standards such as ISO 11204 and ISO 11205 to guide the following. --- Help write noise test specifications; --- Provide a physical explanation for the amount of noise emission compared with other noise amounts (see 4.1~4.3); --- Compare the different measurement methods given in the ISO 11201~ISO 11205 group of standards (see Table 1); --- help in the selection of the most appropriate method in typical practical situations (see Chapter 6). This document is mainly based on flow charts and tables, with example analysis given. This document applies only to airborne sound, generally used for noise testing, especially for the preparation of noise testing specifications. The purpose of developing a standard noise test specification is to select the most suitable Standards for testing machinery and equipment, and give detailed requirements for installation conditions and working conditions for specific types of machinery and equipment, as well as the working conditions specified in these standards. location and other specified locations. The data obtained by the above method can be used for the marking and verification of the emission sound pressure level specified in ISO 4871 [3].2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. ISO 3741 Acoustic sound pressure method for determination of sound power level and sound energy level of noise source reverberation chamber precision method (Acoustics-Determi- Note. GB/T 6881.1-2002 Acoustic Sound Pressure Method Determination of Noise Source Sound Power Level Reverberation Chamber Precision Method (ISO 3741.1999, IDT) ISO 3743-1 Acoustic Sound Pressure Method for Determination of Sound Power Level and Sound Energy Level of Noise Sources - Engineering Method for Small Movable Sound Sources in Reverberation Fields Note. GB/T 6881.2-2017 Acoustic sound pressure method for determination of sound power level and sound energy level of small movable sound sources in reverberation field of noise source engineering method Wall test chamber comparison method (ISO 3743-1.2010, IDT) ISO 3743-2 Acoustic sound pressure method Determination of noise source sound power level in reverberation field Small and medium movable sound source engineering method Part 2. Note. GB/T 6881.3-2002 Acoustic sound pressure method for determination of sound power level of noise source in reverberation field of small and medium-sized movable sound source engineering method Part 2.Special Reverberation test chamber method (ISO 3743-2.1994, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17248.1-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 17248.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17248.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17248.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17248.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17248.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
