Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 16716.2-2018 PDF English

US$170.00 · In stock · Download in 9 seconds
GB/T 16716.2-2018: Packaging and the environment -- Part 2: Optimization of the packaging system
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 16716.2: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 16716.2-2018170 Add to Cart Auto, 9 seconds. Packaging and the environment -- Part 2: Optimization of the packaging system Valid
GB/T 16716.2-201085 Add to Cart Auto, 9 seconds. Packaging and packaging waste -- Part 2: Means and program for evaluation Obsolete

Similar standards

GB/T 16716.3   GB/T 16716.1   GB/T 16716.4   GB 12268   

GB/T 16716.2-2018: Packaging and the environment -- Part 2: Optimization of the packaging system

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT16716.2-2018
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 55.020 A 80 Replacing GB/T 16716.3-2010 Packaging and the environment - Part 2.Optimization of the packaging system (ISO 18602.2013, Packaging and the environment - Optimization of the packaging system, MOD) Issued on. DECEMBER 28, 2018 Implemented on. DECEMBER 28, 2018 Issued by. State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword... 3 Introduction... 6 1 Scope... 8 2 Normative references... 8 3 Terms and definitions... 8 4 Requirements... 10 5 Assessment content for optimization of the packaging system... 12 Annex A (Informative) Assessment of optimization of the packaging system... 14 Annex B (Informative) Examples of the application of assessment checklist for packaging system optimization... 20 Annex C (Informative) Assessment and minimization of substances or mixtures hazardous to the environment... 26 Annex D (Informative) List of standards based on which safety data sheet for chemical products is formulated... 39 Bibliography... 42

Foreword

GB/T 16716 "Packaging and the environment" is divided into six parts. - Part 1.General rules; - Part 2.Optimization of the packaging system; - Part 3.Reuse; - Part 4.Material recycling; - Part 5.Energy recovery; - Part 6.Organic recycling. This Part is Part 2 of GB/T 16716. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 16716.3-2010 "Packaging and packaging waste - Part 3. Prevention by source reduction". Compared with GB/T 16716.3-2010, in addition to editorial changes, the main technical changes of this Part are as follows. - Add the Introduction; - Modify the content of Scope (see Clause 1; Clause 1 of GB/T 16716.3-2010); - Delete normative references CEN CR 13695-1 and CEN CR 13695-2 (see Clause 2 of GB/T 16716.3-2010); - Add normative references GB/T 16483 and GB/T 17519 (see Clause 2); - Delete the term and definition of "Prevention by source reduction" (see 3.1 of GB/T 16716.3-2010); - Modify the terms and definitions about "Critical range of use reduction", "Preparation", and "Safety data sheet" (see 3.2, 3.8, and 3.9; 3.2, 3.5, and 3.6 of GB/T 16716.3-2010); - Add terms and definitions of "Packaging optimization", "Packaging component", "Packaging constituent", "Packaging system", "Packaging waste", and "Substances hazardous to the environment" (see 3.1, 3.4, 3.5, 3.6, 3.10, and 3.11); - Modify the relevant content of "Requirements" (see Clause 4; Clause 4 of GB/T 16716.3-2010); - Modify the relevant content of "Assessment of optimization of the packaging system" (see Annex A; Annex A of GB/T 16716.3-2010); - Modify the relevant content of "Examples of the application of assessment checklist for packaging system optimization" (see Annex B; Annex B of GB/T 16716.3-2010); - Modify the relevant content of "Assessment and minimization of substances or mixtures hazardous to the environment" (see Annex C; Annex C and Annex D of GB/T 16716.3-2010); - Delete the "Assessment flow chart for controlling the compliance of hazardous substances" (see Annex D of GB/T 16716.3-2010). This Part uses the redraft law to modify and adopt ISO 18602.2013 "Packaging and the environment - Optimization of the packaging system". Compared with ISO 18602.2013, this Part deletes 4.1 and C.2 in structure, and adds Annex D. The technical differences between this Part and ISO 18602.2013 and their reasons are as follows. - As for the normative references, this Part has made adjustments with technical differences, to adapt to the technical conditions of China. The adjustments are mainly reflected in Clause 2 “Normative references”. The specific adjustments are as follows.  Replace ISO 18601 with GB/T 16716.1 which modifies and adopts the international standard;  Replace ISO 21067 with GB/T 23156;  Add reference to GB/T 16483;  Add reference to GB/T 17519. The following editorial change has been made to this Part. - In order to be consistent with the existing standard system, change the name to "Packaging and the environment - Part 2.Optimization of the packaging system". This Part was proposed by and shall be under the jurisdiction of National Technical Committee 49 on Packaging of Standardization Administration of China (SAC/TC 49). Drafting organizations of this Part. Sunrise Packaging Material (Jiangyin) Co., Ltd.; China National Export Commodities Packaging Research Institute; Guangzhou Supreme Technology & Testing Service Co., Ltd.; Shenzhen Printing Association; Beijing Pharmaceutical Packaging Materials Inspection Institute; Guangdong Chigo Air Conditioning Co., Ltd.; Zhanjiang Cigarette Packaging Materials Printing Ltd.; Dalian Institute of Standardization; Jinan Labthink Electromechanical Technology Co., Ltd.; Changchun Jingyue Packaging Co., Ltd.; Qingdao Yongchang Plastic & Metal Co., Ltd. Main drafters of this Part. Liu Tianhang, Yang Wei, Wu Haijiao, Xing Wenbin, Sun Xiao, Xu Yinhua, Zhen Rongji, Liu Yingping, Wang Chaohui, Li Xiaoyan, Zhang Yongdong, Gu Juan, Hu Xuanheng, Jiang Bin, Niu Jinhui, Chen Xi, Wang Bo, Zhou Yang. The previous edition of the standard replaced by this Part was released as follows. - GB/T 16716.3-2010.

1 Scope

This Part of GB/T 16716 specifies the assessment requirements and contents for the optimization of the packaging system.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document. GB/T 16483 Safety data sheet for chemical products - Content and order of sections

3 Terms and definitions

The terms and definitions defined in GB/T 16716.1 and GB/T 23156 and the following ones apply to this document. The minimum value of packaging weight (volume) without affecting packaging performance, safety, and consumer (user) satisfaction.

4 Requirements

The packaging manufacturer can calculate and measure the presence of substances hazardous to the environment in its packaging on the basis of information associated with the packaging formulation and manufacturing process.

5 Assessment content for optimization of the packaging system

The assessment content that shall be considered in the determination of critical area(s) in packaging system optimization is as follows. In the assessment process, both legislation and safety shall be considered together. See A.3 for the description of the assessment content of critical area(s).

Annex A

(Informative) Assessment of optimization of the packaging system This annex details the methodology for using this Part for the assessment of packaging system optimization. It can be used for existing packaging or as an aid between packaging supplier and user in agreeing to a specification for new packaging.

Annex B

(Informative) Examples of the application of assessment checklist for packaging system optimization The purpose of this annex is to give an example of the use of assessment checklist for packaging system optimization. B.2 example selects fresh juice packaging system optimization assessment as a case where only a single critical area needs to be considered.

Annex C

(Informative) Assessment and minimization of substances or mixtures hazardous to the environment This annex deals with the assessment of substances or mixtures hazardous to the environment that may be present in packaging and with the minimization of their use. Within this general scope, special attention is given to the possible presence of four heavy metals. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 16716.2-2018 be delivered?Answer: The full copy PDF of English version of GB/T 16716.2-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 16716.2-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16716.2-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 16716.2-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 16716.2-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16716.2-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 16716.2-2018?

A step-by-step guide to download PDF of GB/T 16716.2-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 16716.2-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9