Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 16461-2016 English PDF

Q: How long will the true-PDF of English version of GB/T 16461-2016 be delivered?

Upon your order, we will start to translate GB/T 16461-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 16461-2016_English with my colleagues?

Yes. The purchased PDF of GB/T 16461-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 16461-2016?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16461-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$1179.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16461-2016: Tool-life testing with single-point turning tools
Status: Valid

GB/T 16461: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 16461-2016	1179	Add to Cart	8 days	Tool-life testing with single-point turning tools	Valid
GB/T 16461-1996	RFQ	ASK	6 days	Tool-life testing with single-point turning tools	Obsolete

Similar standards

GB/T 33524.2 GB/T 972 GB/T 5104 GB/T 16460 GB/T 16459

Basic data

Standard ID: GB/T 16461-2016 (GB/T16461-2016)
Description (Translated English): Tool-life testing with single-point turning tools
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.10
Word Count Estimation: 59,530
Date of Issue: 2016-02-24
Date of Implementation: 2016-09-01
Older Standard (superseded by this standard): GB/T 16461-1996
Quoted Standard: GB/T 145; GB/T 699; GB/T 1031; GB/T 2075; GB/T 2079; GB/T 5343.2; GB/T 9239.1-2006; GB/T 9439; GB/T 9943; GB/T 12204; GB/T 15306.1; GB/T 15306.2; GB/T 17162; ISO 185; ISO 683-1
Adopted Standard: ISO 3685-1993, MOD
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 16461-2016: Tool-life testing with single-point turning tools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tool-life testing with single-point turning tools ICS 25.100.10 J41 National Standards of People's Republic of China Replacing GB/T 16461-1996 Single point turning tool life test (ISO 3685.1993, MOD) Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 16461-1996 "single point turning tool life test." This standard compared with GB/T 16461-1996, in addition to editorial changes outside the main technical differences are as follows. --- Remove the ISO foreword; --- Remove the foreword statement Appendix nature, increasing the draft rules are based on standards for the preparation, increasing the technical differences correspond to international standards; --- Revised introduction; --- Modify the list of normative references; --- Modify the terms of the narrative; --- Remove the body of the statement of the nature of the Appendix; Appendix B Table B.1 --- the content of "S" from "0.02 to 0.035" to "maximum 0.035"; --- Remove Appendix F F.1 "Overview"; --- References section instead of using the applicable country file. This standard uses redrafted law revision using ISO 3685.1993 "single point turning tool life test." This standard and ISO 3685.1993 is the main technical difference. --- Workpiece reference materials used in GB/T 699 in steel or 45 GB/T 9439 HT250 cast iron, see 4.1 and Appendix B B.1 and B.2; --- Tool material selected from the high-speed steel GB/T 9943 non-coating with non-cobalt high speed steel (W18Cr4V and W6Mo5Cr4V2) or cobalt high speed steel (W6Mo5Cr4V2Co5 and W2Mo9Cr4VCo8), see 5.1.2; Delete F --- in Appendix F.1. This standard and ISO 3685.1993 editorial differences as follows. --- Remove the preface; --- Revised introduction; --- Scope statement has been adjusted; --- Modify the normative references, instead of the international standard cited by the applicable national standards of; --- References section instead of using the applicable country file. This standard and ISO 3685.1993 exist technical differences in terms of these differences has been involved in a single vertical line through its outer margin position (|) were marked. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Research Institute Limited. The main drafters of this standard. Xu Gang, check States soldiers. This standard replaces the standards previously issued as follows. --- GB/T 16461-1996.

Introduction

This standard covers can be used for single-point turning tool laboratories and manufacturing units recommended life testing. When the cutting tool, workpiece material, cutting fluid or cutting parameters were compared, these recommendations aimed at harmonizing steps to improve the reliability and comparability of test results. As close as possible to these objectives, including the recommended reference material standards, can be employed both as far as practicable. In addition, the standard recommended values may be used to help determine the recommended cutting data or determine the value of constraints and processing characteristics, such as cutting force, the machined surface characteristic values and the like in the form of chips. For these purposes, even though the already recommended values were given certain parameters, it may be used as a variable. The recommended standard test conditions intended to be used on steel and cast iron specimen with normal microstructure for turning test the overall high-speed steel cutting tools, carbide or ceramic tools. However, this standard may be appropriate modifications, for example, it is used for other workpiece material or special tools developed for turning test. The accuracy of the recommended values specified shall be considered as a minimum requirement. Any deviation from the recommended values should be described in detail in the test report. Single point turning tool life test

1 Scope

This standard specifies the use of high speed steel, carbide ceramics and life testing single point turning tool turning steel and cast iron recommended procedure. Regulate the following factors involved in the test. the workpiece, tool, cutting fluids, cutting conditions, equipment, tool life and tool failure assessment, test procedure and recording, evaluation and reporting of results. This standard does not specify acceptance tests. In the turning test to consider cutting conditions using the following two types. a) mainly due to wear and failure conditions, it is the condition of this standard the main consideration; b) due to other phenomena, such as cracking or plastic deformation of the cutting edge and the failure condition, this condition requires further study. This standard applies to real life test laboratory and production of single point turning tool, see Appendix A.

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 145 center hole GB/T 699 high-quality carbon structural steel GB/T 1031 Geometrical product specifications (GPS) Surface texture Profile method Surface roughness parameters and their values GB/T 2075 Classification and use of cutting large groups and groups of application of hard cutting materials classification code (GB/T 2075- 2007, ISO 513.2004, IDT) GB/T 2079 non-porous carbide indexable inserts (GB/T 2079-1987, ISO 883. 1985, EQV) GB/T 5343.2 indexable turning tools and tool holders - Part 2. Type size indexable turning tools and technical conditions (GB/T 5343.2- 2007, ISO 5610.1998, MOD) GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test (ISO 1940-1.2003, IDT) GB/T 9439 Gray Iron Castings (GB/T 9439-2010, ISO 185.2005, MOD) GB/T 9943 high-speed tool steel (GB/T 9943-2008, ISO 4957.1999, NEQ) GB/T 12204 metal cutting basic terms GB/T 15306.1 Ceramic indexable inserts - Part 1. nonporous blade size (G grade) (GB/T 15306.1-2008, ISO 9361-1.1991, MOD) GB/T 15306.2 Ceramic indexable inserts - Part 2. perforated blade size (GB/T 15306.2-2008, ISO 9361-2.1991, MOD) GB/T 17162 machine speed and feed rate (GB/T 17162-1997, ISO 229. 1973, EQV) ISO 185 classification of gray cast iron ISO 683-1 heat-treated steels, alloy steels and free cutting steels - Part 1. Black to various hardened unalloyed and low-alloy forged steel ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16461-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16461-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16461-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16461-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16461-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16461-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.