GB/T 16456.3-2008 English PDFUS$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16456.3-2008: End mills with brazed helical hardmetal tips -- Part 3: Dimensions of end mills with morse typer shank Status: Valid GB/T 16456.3: Historical versions
Basic dataStandard ID: GB/T 16456.3-2008 (GB/T16456.3-2008)Description (Translated English): End mills with brazed helical hardmetal tips -- Part 3: Dimensions of end mills with morse typer shank Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J41 Classification of International Standard: 25.100.20 Word Count Estimation: 5,599 Date of Issue: 2008-06-03 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 16456.3-1996 Quoted Standard: GB/T 1443 Regulation (derived from): National Standard Approval Announcement 2008 No.9 (Total No.122) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the helical carbide end mills with morse taper shank types and dimensions. This section applies to 16 mm ~ 63 mm carbide spiral tooth Morse taper shank end mills. GB/T 16456.3-2008: End mills with brazed helical hardmetal tips -- Part 3: Dimensions of end mills with morse typer shank---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. End mills with brazed helical hardmetal tips Part 3. Dimensions of end mills with morse typer shank ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 16456.3-1996 Helical carbide end mill Part 3. Morse taper shank end mills Type and size Posted 2008-06-03 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 16456 "helical carbide end mill" is divided into four parts. --- Part 1. straight shank end mill type and size; --- Part 2. 7.24 taper shank end mill type and size; --- Part 3. Morse taper shank end mill type and size; --- Part 4. Technical specifications. This section GB/T Part of 316,456. This part is GB/T 16456.3-1996 "helical carbide end mills - Part 3. Morse taper shank end mills and type Size "amendments. Section compared with the GB/T 16456.3-1996 The main changes are as follows. --- Modify the normative references. This part is proposed by China Machinery Industry Federation. This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized. This section is drafted. a Henan Tools Co., Ltd., Chengdu Tool Institute. The main drafters of this section. Zhao Jianmin, Chen Shichang, Kong Chunyan, Pan Aiguo, Fan Yingjie, Wang Zhuo Lin, Dinglian Zhi, to be righteous. This part of the standard replaces the previous editions are. --- GB/T 16456.3-1996. Helical carbide end mill Part 3. Morse taper shank end mills Type and size1 ScopeGB/T 16456 provisions of this part of the helical carbide end mills with Morse taper shank types and dimensions. This section applies to ๎16mm ~ ๎63mm carbide spiral teeth Morse taper shank end mills.2 Normative referencesThe following documents contain provisions which, through reference GB/T 16456 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions used in the present section. GB/T 1443 from machine tools and tool handles with clip cone (GB/T 1443-1996, eqv ISO 296.1991)3 SymbolL --- End mills total length.4 type and size4.1 Carbide helical Morse taper shank end mill type and size according to Figure 1 and Table 1, Morse taper shank dimensions and deviations Press GB/T 1443 regulations. Figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16456.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16456.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16456.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16456.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16456.3-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16456.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
