GB/T 16414-2008 English PDFUS$579.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16414-2008: Terms relating to coal mining -- Rock mechanics Status: Valid GB/T 16414: Historical versions
Basic dataStandard ID: GB/T 16414-2008 (GB/T16414-2008)Description (Translated English): Terms relating to coal mining -- Rock mechanics Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D04 Classification of International Standard: 01.040.73 Word Count Estimation: 25,215 Date of Issue: 2008-07-29 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB/T 16414-1996 Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the basic terminology and mine rock mechanics related to the coal face, rockburst, term roadway and so on. This standard applies to all relevant documents and rock mechanics, regulations, specification, Books, textbooks and manuals. GB/T 16414-2008: Terms relating to coal mining -- Rock mechanics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terms relating to coal mining. Rock mechanics ICS 01.040.73 D04 National Standards of People's Republic of China Replacing GB/T 16414-1996 Coal Science and Technology Terminology mechanics Posted 2008-07-29 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 16414-1996 "coal mine rock mechanics and scientific terms." This standard and GB/T 16414-1996 compared to the main changes are as follows. --- Revised Chapter 2 ~ Chapter 5 chapter heading, by deleting the heading "section" word; --- "Basic terminology" added "surrounding rock deformation, rock (body) inhomogeneity of rock (body) ductile" and other terms; --- "Coal Face" to increase the "top coal top coal caving top coal caving classification" and other terms; --- "Burst pressure" to add a "shock rock tendentious stereotypes burst pressure, burst pressure gravity type" and other terms; --- "Roadway" removed "interim support," adds "bolt axial force, prestressed anchor and anchor rope safety factor" and other terms; --- On the part of the term of the corresponding English word has been modified; --- The definition of some of the terms were modified; --- Position some of the terms have been adjusted. The standard proposed by China Coal Industry Association. This standard by the National Standardization Technical Committee of Coal. This standard was drafted. CCRI Mining Design Research Branch, China Coal Research Institute Detection Research Branch. The main drafters of this standard. Qi Qingxin, Li Jiqing, Pengyong Wei, Fu Jingyu. This standard replaces the standards previously issued as follows. --- GB/T 16414-1996. Coal Science and Technology Terminology mechanics1 ScopeThis standard specifies the basic terminology of coal mine rock mechanics and terminology related to coal mining face, rock burst roadway and the like. This standard applies to documents, rules, standards, books, textbooks and manuals and all other relevant rock mechanics.2 Basic terms2.1 Coal Mine Rock (body) deformation and failure regularity and scientific applications in the external force. 2.2 Layered rock (body) deformation and failure regularity and scientific applications in the external force. 2.3 Ground Pressure Caused by the mine excavation project in surrounding rocks redistribution of power. 2.4 Under pressure mine, or surrounding rock support exhibited by various mechanical phenomenon. 2.5 To protect the safety of mine exploitation, artificially controlling and regulating technical measures rock deformation, destruction and movement. 2.6 Rock (body) after removal of the external force can be fully restored to its original state of deformation. 2.7 Rock (body) after removal of the external force deformation can not be restored. 2.8 Compared with rock engineering structure geometry, deformation can not be ignored. 2.9 The nature of the deformation and flow under the external force, temperature, humidity and other conditions associated with the time factor (body) rock. 2.10 Rock (body) physical and mechanical properties as well as components, and other components vary with the spatial location characteristics. 2.11 Rock (body) memory in a variety of fractures and faults and other randomly distributed in different directions so as to have a discontinuous characteristics. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16414-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16414-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16414-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16414-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16414-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16414-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
