GB/T 16124-2025 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16124-2025: Technical specification for environmental health impact assessment of water conservancy and hydropower project Status: Valid GB/T 16124: Historical versions
Basic dataStandard ID: GB/T 16124-2025 (GB/T16124-2025)Description (Translated English): Technical specification for environmental health impact assessment of water conservancy and hydropower project Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C52 Classification of International Standard: 13.040.30 Word Count Estimation: 22,236 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 16124-1995 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 16124-2025: Technical specification for environmental health impact assessment of water conservancy and hydropower project---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT16124-2025 ICS 13.040.30 CCSC52 National Standard of the People's Republic of China Replaces GB/T 16124-1995 Technical Specifications for Environmental Health Impact Assessment of Water Conservancy and Hydropower Projects Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Evaluation Principles 2 4.1 Principles of comparison 2 4.2 Principles for the selection of evaluation indicators 3 5 General Requirements 3 5.1 Evaluation Purpose 3 5.2 Evaluation Content 3 5.3 Scope of evaluation 3 5.4 Setting up the control area 3 5.5 Evaluation Procedure 3 6 Evaluation plan established 3 6.1 Preliminary Research 3 6.2 Drafting of evaluation indicators 3 6.3 Preparation of evaluation plan 3 6.4 Evaluation plan review 4 7 Current Situation Survey 4 7.1 Investigation Requirements 4 7.2 Survey Content 4 7.3 Current Situation Survey Methods 5 8 Current Status Evaluation 5 8.1 Evaluation Requirements 5 8.2 Data Analysis 5 8.3 Evaluation indicators 6 8.4 Evaluation Method 7 9 Prediction Evaluation 7 9.1 Prediction and Evaluation Requirements 7 9.2 Prediction and Evaluation Methods 7 10 Report Preparation 8 Appendix A (Informative) Population Health Status Evaluation Indicator Formula 9 Appendix B (Informative) Statistical Correlation Analysis Index Calculation Formula 12 Appendix C (Informative) Outline of Environmental Health Impact Assessment Report for Water Conservancy and Hydropower Projects 14 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 16124-1995 "Technical Specification for Medical Evaluation of Environmental Impacts of Water Conservancy and Hydropower Projects" and GB/T 16124- Compared with.1995, in addition to structural adjustments and editorial changes, the technical changes are as follows. --- Changed the evaluation principles (see Chapter 4, 3.4 and 3.5 of the.1995 edition); --- Changed the general requirements (see Chapter 5, Chapter 3 of the.1995 edition); --- Added the steps for establishing the evaluation plan (see Chapter 6); --- Changed the content of the current situation investigation (see 7.2, 4.2 of the.1995 edition) and the current situation investigation method (see 7.3, 4.3 of the.1995 edition); --- Added current status evaluation requirements (see 8.1); --- Changed the current status evaluation indicators (see 8.3, 5.1 of the.1995 edition) and the current status evaluation methods (see 8.4, 5.2 of the.1995 edition); --- Changed the prediction evaluation method (see 9.2, 6.2 of the.1995 edition); --- Deleted the countermeasures (see Chapter 7 of the.1995 edition); --- Added report preparation (see Chapter 10). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Center for Disease Control and Prevention. This document was drafted by. Huazhong University of Science and Technology, Yangtze River Survey Planning and Design Research Co., Ltd., China Center for Disease Control and Prevention, Environmental and Institute of Health-Related Product Safety, Chinese Research Academy of Environmental Sciences, and Army Medical University. The main drafters of this document are. Xu Shunqing, Xia Wei, Li Yuanyuan, Ma Fangkai, Pan Lijun, Zhang Zhongwei, Jiang Jinyuan, Su Liqin, Cao Jia, and Li Li. The previous versions of this document and the documents it replaces are as follows. ---First published in.1995 as GB/T 16124-1995; ---This is the first revision. Technical Specifications for Environmental Health Impact Assessment of Water Conservancy and Hydropower Projects1 ScopeThis document specifies the overall requirements and contents of environmental health impact assessment for water conservancy and hydropower projects, and describes the assessment and prediction methods. This document is applicable to the health impact of large and medium-sized water conservancy and hydropower projects such as flood control, water supply, and power generation during the feasibility study stage of new, modified, and expanded projects. Small water conservancy and hydropower projects shall be implemented as a reference.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 3838 Surface Water Environmental Quality Standard GB 5749 Sanitary Standard for Drinking Water GB/T 5750 (all parts) Standard test methods for drinking water GB/T 14848 Groundwater Quality Standard GB 15618 Soil Environmental Quality Agricultural Land Soil Pollution Risk Control Standard (Trial Implementation) GB 16883 Determination of natural foci of plague and epidemics of animal plague GB/T 23795 Method for monitoring density of disease vectors - Cockroaches GB/T 23796 Methods for monitoring density of disease vectors - Flies GB/T 23797 Methods for monitoring density of disease vectors - Mosquitoes GB/T 23798 Methods for monitoring density of disease vectors - Rodents GB/T 27770 Density control level of disease vectors (rodents) GB/T 27771 Density control level of disease vectors - mosquitoes GB/T 27772 Density control levels of disease vectors - flies GB/T 27773 Density control of disease vectors (horizontal cockroaches) GB 36600 Soil Environmental Quality - Construction Land Soil Pollution Risk Control Standard (Trial Implementation) GB/T 36788 Methods for monitoring density of disease vectors - Ticks HJ/T 166 Technical Specification for Soil Environmental Monitoring HJ839 Environmental and Health Site Investigation Technical Specifications Cross-sectional Survey SL219 Water Environment Monitoring Specifications SL252 Classification of water conservancy and hydropower projects and flood standards SL733 Technical regulations for monitoring phytoplankton in inland waters WS/T 563 Oncomelania snail survey3 Terms and DefinitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16124-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 16124-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16124-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16124-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16124-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16124-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
