GB/T 15908-2025 English PDFUS$354.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15908-2025: Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification Status: Valid GB/T 15908: Historical versions
Basic dataStandard ID: GB/T 15908-2025 (GB/T15908-2025)Description (Translated English): Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G42 Classification of International Standard: 83.140.40; 23.100.40 Word Count Estimation: 18,198 Date of Issue: 2025-08-29 Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 15908-2009 Issuing agency(ies): State Administration for Market Regulation, National Standardization Administration GB/T 15908-2025: Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15908-2025 ICS 83.140.40;23.100.40 CCSG42 National Standard of the People's Republic of China Replaces GB/T 15908-2009 Plastic hoses and hose assemblies Specification for fabric reinforcement for hydraulic applications (ISO 3949.2020, IDT) Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 15908-2009 "Plastic hoses and hose assemblies for hydraulic use, fabric reinforced" and Compared with GB/T 15908-2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the range. The operating temperature range of oil-based hydraulic fluids has been changed from "-40 ℃ ~ 100 ℃" to "-40 ℃ ~ 93℃”, added relevant requirements for hydraulic fluid being water (see Chapter 1, Chapter 1 of the.2009 edition); --- Added R18 type hose (see Chapter 4); --- Added the hose with a nominal inner diameter of 3.2 and related requirements (see 6.1); --- Changed the test method for minimum bending radius (see 7.3, 7.3 of the.2009 edition); --- Changed the low temperature flexure test method (see 7.6, 7.6 of the.2009 edition); ---Changed the volume change rate requirements for oil-resistant base fluids. The volume change rate of the lining and outer covering was changed from "0%~35%" to “-15% to 35%” (see 7.9.2,.2009 edition); ---Changed the volume change rate requirement for water-based fluid resistance, and the volume change rate of the lining and outer covering was changed from "0%~25%" to “-15% to 35%” (see 7.9.3,.2009 edition); --- Changed the requirements for water resistance, the volume change rate of the lining and outer covering was changed from "should not exceed 25%" to “-15% to 35%” (see 7.9.4,.2009 edition); --- Added visual inspection requirements (see 7.10); --- Changed the inspection frequency of type inspection and routine inspection items (see Appendix A, Appendix A of the.2009 edition). This document is equivalent to ISO 3948.2020 "Plastics hoses and hose assemblies – Fabric-reinforced for hydraulic use" Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Technical Committee on Rubber and Rubber Products of Standardization (SAC/TC35). This document was drafted by. Taizhou Changli Resin Pipe Co., Ltd., Shenyang Rubber Research and Design Institute Co., Ltd., Hebei Zhongmei Special Rubber Co., Ltd. Co., Ltd., Hebei Sanye Fluid Technology Co., Ltd., Hebei Youlu Fluid Technology Co., Ltd., Hebei Hongguang Rubber and Plastic Metal Products Co., Ltd. Co., Ltd., Hebei Jiuxing Rubber and Plastic Products Co., Ltd., Hebei Dezhen Testing Technology Service Co., Ltd., and Shenyang Ziweiheng Testing Equipment Co., Ltd. The main drafters of this document are. Zhou Man, Wang Fei, Zhang Hongyi, Li Yang, Xu Meng, Li Zengyi, Zhang Da, Wu Binglan, Li Kunpeng, Weng Jiayuan, Shi Hongyan, Zhang Bo, Gao Chenxiao, Huang Liangliang, and Peng Bo. The previous versions of this document and the documents it replaces are as follows. --- First published as GB/T 15908-1995 in.1995 and first revised in.2009; ---This is the second revision. Plastic hoses and hose assemblies Specification for fabric reinforcement for hydraulic applications1 ScopeThis document specifies three types of hydraulic fabric reinforced thermoplastic hoses and hose assemblies with a nominal inner diameter range of 3.2~25. Each type is divided into two grades according to the conductivity requirements. They are suitable for. --- Oil-based hydraulic fluids HH, HL, HM, HR and HV (as defined in ISO 6743-4), temperature range -40 °C to 93℃; --- Water-based hydraulic fluids HFC, HFAE, HFAS and HFB (as defined in ISO 6743-4), temperature range 0°C~ 60℃; ---Water, temperature range 0℃~60℃. This document does not include requirements for pipe fittings, but is limited to performance requirements for hoses and hose assemblies. NOTE. It is the user's responsibility to consult the hose manufacturer to confirm the compatibility of the hose with the fluid being used.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. assemblies-Hydrostatic testing) Note. GB/T 5563-2013 Rubber and plastic hoses and hose assemblies - Test methods for hydrostatic pressure (ISO 1402.2009, IDT) Note. GB/T 1690-2010 Test method for resistance of vulcanized rubber or thermoplastic rubber to liquids (ISO 1817.2005, IDT) ISO 4671 Rubber and plastics hoses and hose assemblies - Methods of measuring hose dimensions and hose assembly lengths Note. GB/T 9573-2013 Rubber and plastic hoses and hose assemblies - Hose dimensions and hose assembly length measurement methods (ISO 4671.2007, IDT) Note. GB/T 5568-2022 Rubber or plastic hoses and hose assemblies - Hydraulic impulse test without flexure (ISO 6803.2017, IDT) Note. GB/T 24134-2009 Rubber and plastic hoses - Evaluation of ozone resistance under static conditions (ISO 7326.2006, IDT) assemblies-Vocabulary) Note. GB/T 7528-2019 Rubber and plastic hoses and hose assemblies - Terminology (ISO 8330.2014, IDT) ISO 10619-1.2017 Rubber and plastics hoses and non-reinforced hoses — Determination of flexibility and stiffness — Part 1.Bend test at room temperature ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15908-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 15908-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15908-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15908-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15908-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15908-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
