GB/T 15663.7-2008 English PDFUS$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15663.7-2008: Terms relating to coal mining -- Part 7: Mining subsidence and special coal mining Status: Valid GB/T 15663.7: Historical versions
Basic dataStandard ID: GB/T 15663.7-2008 (GB/T15663.7-2008)Description (Translated English): Terms relating to coal mining -- Part 7: Mining subsidence and special coal mining Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D04 Classification of International Standard: 01.040.73 Word Count Estimation: 16,160 Date of Issue: 2008-09-18 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 15663.7-1995 Regulation (derived from): National Standard Approval Announcement 2008 No.16 (Total No.129) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the principal terms of special coal mining subsidence science and technology fields. Involved in coal mining subsidence, special mining, mining damage control and other areas. This section applies to mining subsidence, special coal mining damage and all documents relating to the prevention and treatment, standards, regulations, specification, Books, textbooks and manuals. GB/T 15663.7-2008: Terms relating to coal mining -- Part 7: Mining subsidence and special coal mining---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Terms relating to coal mining Part 7. Mining subsidence ICS 01.040.73 D04 National Standards of People's Republic of China Replacing GB/T 15663.7-1995 Coal Science and Technology Terminology Part 7. coal mining subsidence and special Posted 2008-09-18 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 15663 "to coal The term" divided into the following sections. --- Part 1. Coal Geology & Exploration; --- Part 2. underground construction; --- Part 3. underground mining; --- Part 4. open pit mining; --- Part 5. hoisting and transport; --- Part 6. Mine Surveying; --- Part 7. coal mining subsidence and special; --- Part 8. mine safety; --- Part 10. mining machinery; --- Part 11. Electric Mine. This section GB/T 15663 Part 7. This Part replaces GB/T 15663.7-1995 "term to coal mining subsidence." This section compared with the GB/T 15663.7-1995, mainly made the following additions and modifications. --- Delete the original standard "mobile area" terms. --- New surface movement parameters, the extent of mining, backfill mining, special coal mine water damage and other aspects of pressed mining terminology 23. --- The definition of some of the terms were modified. This part is proposed by the China Coal Industry Association. This part of the National Standardization Technical Committee centralized coal. This section is drafted. Coal Research Institute Beijing Institute of Mining. The main drafters of this section. Zhang Huaxing, Chen Peipei. This part of the standard replaces the previous editions are. --- GB/T 15663.7-1995. Coal Science and Technology Terminology Part 7. coal mining subsidence and special1 ScopeThis section defines the main terms of mining subsidence science and technology in the field of special coal mining, coal mining subsidence involving special coal mining, mining loss Damage control and other aspects. This section applies to mining subsidence, special mining and mining damage prevention related to all documents, standards, rules, standards, books, teaching materials And manuals.2 mining subsidence2.1 Because scientific research strata movement and surface subsidence caused by coal mining phenomenon, law and other related issues. 2.2 Due to mining-induced rock mass until ground movement, deformation and failure phenomena and processes. 2.3 Overburden from the mining-induced rupture to goaf caving range. 2.4 Rock caving belt that produces breaks or cracks, but still maintains its original range of layered rock. 2.5 Fault until the top surface bending rock range. 2.6 Strata movement caused by mining affected surface leaving the surface to produce movement, deformation and failure phenomena and processes. 2.7 Surface subsidence basin Above the surface mining goaf caused by the movement of the overall shape and scope. 2.8 Surface mining affected by the border, the following general Shen 10mm OK. 2.9 palsectionofsubsidencetrough By moving the point of maximum subsidence basin, along the seam or the tendency toward vertical section. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15663.7-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 15663.7-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15663.7-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15663.7-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15663.7-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15663.7-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
