GB/T 15575-2008 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15575-2008: Steel products standard designation Status: Valid GB/T 15575: Historical versions
Basic dataStandard ID: GB/T 15575-2008 (GB/T15575-2008)Description (Translated English): Steel products standard designation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H40 Classification of International Standard: 77.140.01 Word Count Estimation: 10,166 Date of Issue: 2008-05-13 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): GB/T 15575-1995 Regulation (derived from): National Standard Approval Announcement 2008 No.8 (Total No.121) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the representation of steel products and common marking code marking code. This standard applies to the bars, flat steel, steel, wire rod and other products labeled code. GB/T 15575-2008: Steel products standard designation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Steel products standard designation ICS 77.140.01 H40 National Standards of People's Republic of China Replacing GB/T 15575-1995 Steel product standard designation Posted 2008-05-13 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 15575-1995 "steel products labeled Code." This standard compared with GB/T 15575-1995 standards, the main changes are as follows. --- Will be in "processing methods", "hot-rolled", "forging", "thermal expansion", "hot pressing" and "cold-rolled" cold extrusion individually labeled, and increase The "welding" of the standard designation; --- In the "cross-sectional shape and the symbol" added "round", "square steel" and other standard designation example; --- Remove the "heat treatment type" designator letter T; --- Remove the "mechanical properties" code; --- Modify the "dimensional accuracy" marking methods; --- In "Surface Type" increased "coating" tag code, and modify the "plating" standard designation; --- In the "surface treatment" added "oiled", "anti-fingerprint treatment" standard designation; --- In the "stamping performance," added the "special deep leveling", "ultra-deep leveling" and "Super-deep leveling"; --- Remove the "general purpose", "important use", "special purpose" and "other use" code. Appendix A of this standard is an informative annex. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard was drafted. Metallurgical Industry Information Standards Institute. The main drafters of this standard. Liu gem, wear strong, Luan Yan. This standard was first released in June 1995. Steel product standard designation1 ScopeThis standard specifies the steel product mark code representation and common markup code. This standard applies to bars, flat steel, steel pipes, wire rod and other products labeled Code. Category 2 Steel products labeled code as follows. 2.1 Processing Method 2.2 cross-sectional shape and model 2.3 size (shape) Accuracy 2.4 edge state 2.5 surface quality 2.6 Surface Category 2.7 Surface treatment 2.8 Softening 2.9 hardening 2.10 Heat Treatment Type 2.11 stamping performance 2.12 Processing Method3 steel products labeled code representation3.1 steel products labeled with the category name code using the corresponding English name of the first letters (uppercase) and (or) a combination of Arabic numerals indicate. 3.1.1 steel products by the standard designation indicates the type and characteristics of the two parts of the tag code components. For example. Trimming strip standard designation EC. E --- Representative category is marginalized; C --- representative feature of trimming. 3.1.2 can be represented using Arabic numerals as product features standard designation. For example. Low Chilled strip marking codes H1/4. H --- Representative category sclerosis; 1/4 --- Representative characterized by low chill. 3.1.3 Under customary and versatility, can be internationally accepted standard designation. For example, hot usable AR said control available CR rolling table Shown, normalized rolled + N can be expressed, thermo-mechanical controlled rolling (TMCP) M may be represented. Standard designation according to the above method does not provide a standard 3.2 be prescribed.4 common standard designationSteel products using this standard from 4.1 to 4.12 as specified in the code labeled. 4.1 Processing Method W processing methods a) thermal processing WH ...... |
