GB/T 15391-2010 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15391-2010: Dimension, shape and tolerances for cold-rolled steel strips with a width less than 600 mm Status: Valid GB/T 15391: Historical versions
Basic dataStandard ID: GB/T 15391-2010 (GB/T15391-2010)Description (Translated English): Dimension, shape and tolerances for cold-rolled steel strips with a width less than 600 mm Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H46 Classification of International Standard: 77.140.50 Word Count Estimation: 6,689 Date of Issue: 2010-09-02 Date of Implementation: 2011-06-01 Older Standard (superseded by this standard): GB/T 15391-1994 Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the size of a width less than 600 mm cold-rolled steel (hereinafter referred to as the strip) of, shape and tolerances, This standard applies to the rolling width of less than 600mm, thickness less than 3mm of cold-rolled strip. GB/T 15391-2010: Dimension, shape and tolerances for cold-rolled steel strips with a width less than 600 mm---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Dimension, shape and tolerances for cold-rolled steel strips with a width less than 600 mm ICS 77.140.50 H46 National Standards of People's Republic of China Replacing GB/T 15391-1994 Width less than 600mm cold rolled steel strip Size, shape and allowable deviation Dimension, shapeandtolerancesforcold- 2010-09-02 release 2011-06-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released ForewordThe standard instead of GB/T 15391-1994 "width less than 600mm cold rolled steel strip size, shape and allowable deviation." This standard is compared with the original standard, the main amendments are as follows. - redefine the classification and codename; --- to cancel the original standard supply thickness negative deviation agreement terms; --- the width of the allowable deviation, roughness re-provided; --- the weight of the provisions. This standard is proposed by China Iron and Steel Industry Association. This standard by the National Steel Standardization Technical Committee. The drafting of this standard unit. Metallurgical Industry Information Standards Institute, Jiangsu Province, stainless steel products Quality Supervision and Inspection Center. The main drafters of this standard. Wang Xiaohu, Dong Li, Chen Anyuan. This standard has been replaced by the previous version of the release. --- GB/T 15391-1994. Width less than 600mm cold rolled steel strip Size, shape and allowable deviation1 ScopeThis standard specifies the width, less than 600mm cold-rolled strip (hereinafter referred to as steel) size, shape and allowable deviation. This standard applies to the rolling width of less than 600mm, the thickness of not more than 3mm cold rolled steel.2 classification and code2.1 divided by edge state Trimming EC Not trimming em 2.2 by size accuracy is divided into Ordinary thickness accuracy Higher thickness accuracy General width accuracy Higher width accuracy PW.B3 size3.1 The thickness of the steel strip is not more than 3.00mm. 3.2 The width of the steel strip is 6mm ~ < 600mm.4 size tolerance4.1 Allowable deviation of thickness 4.1.1 The allowable deviation of the thickness of the strip shall be in accordance with Table 1. Table 1 units are in millimeters Nominal thickness Thickness tolerance Normal accuracy, PT.A higher accuracy, PT.B Nominal width Nominal width < 250 250 ~ < 600 < 250 250 ~ < 600 ≤ 0.10 ± 0.010 ± 0.015 ± 0.005 ± 0.010 > 0.10 to 0.15 ± 0.010 ± 0.020 ± 0.005 ± 0.015 > 0.15 ~ 0.25 ± 0.015 ± 0.030 ± 0.010 ± 0.020 > 0.25 to 0.40 ± 0.020 ± 0.035 ± 0.015 ± 0.025 > 0.40 to 0.70 ± 0.025 ± 0.040 ± 0.020 ± 0.030 > 0.70 to 1.00 ± 0.035 ± 0.050 ± 0.025 ± 0.035 > 1.00 ~ 1.50 ± 0.045 ± 0.060 ± 0.035 ± 0.045 > 1.50 to 2.50 ± 0.060 ± 0.080 ± 0.045 ± 0.060 > 2.50 to 3.00 ± 0.075 ± 0.090 ± 0.060 ± 0.070 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15391-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 15391-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15391-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15391-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15391-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15391-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
