GB/T 15289-2013 English PDFUS$1099.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15289-2013: General specification for digital storage oscilloscope Status: Valid GB/T 15289: Historical versions
Basic dataStandard ID: GB/T 15289-2013 (GB/T15289-2013)Description (Translated English): General specification for digital storage oscilloscope Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L85 Classification of International Standard: 17.220 Word Count Estimation: 50,530 Older Standard (superseded by this standard): GB/T 15289-1994 Quoted Standard: GB/T 191; GB 4793.1-2007; GB/T 6587-2012; GB/T 6592-2010; GB/T 11463-1989; GB/T 11464 Regulation (derived from): National Standards Bulletin 2013 No. 27 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the digital storage oscilloscope (hereinafter referred to as the "scope") terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to digital storage GB/T 15289-2013: General specification for digital storage oscilloscope---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General specification for digital storage oscilloscope ICS 17.220 L85 National Standards of People's Republic of China Replacing GB/T 15289-1994 General specification for digital storage oscilloscope Issued on. 2013-12-31 2014-07-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Requirements 8 5 Test methods 14 37 6 Inspection Rules 7 signs, packaging, transportation and storage 45ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 15289-1994 "digital storage oscilloscope General technical requirements and test methods." This standard compared with GB/T 15289-1994, the main changes are as follows. --- Fixed some of the terms noun, and adds three-dimensional digital oscilloscope channel coupling, high-resolution mode, fast mode waveform capture Eligible rate, waveform intensity, persistence display definitions of the terms. --- Increased digital persistence display, Test Method for waveform capture rate and other parameters. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the National Standardization Technical Committee Electronic Measuring Instruments (SAC/TC153) centralized. This standard was drafted. University of Electronic Science and Technology, Beijing Rigol Technologies Co., Ltd., Jiangsu Luyang Electronic Instrument Group companies, industry and Ministry of Information Industry Institute of Electronics Standardization. The main drafters of this standard. Tian Shulin Ye Peng, Wang Tiejun, Wang Yue, Hangu Cheng, Huang Jianguo, Chen Zhenyu, Huang Yinghua, Cao Ling, Jin Feng law, Pan Hui Qing. This standard replaces the standards previously issued as follows. --- GB/T 15289-1994. General specification for digital storage oscilloscope1 ScopeThis standard specifies the digital storage oscilloscope (hereinafter referred to as "scope") terms and definitions, requirements, test methods, inspection rules, marking Chi, packaging, transportation and storage. This standard applies to digital storage oscilloscope.2 Normative referencesThe following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements GB/T 6587-2012 General specification for electronic measuring instruments GB/T 6592-2010 Electrical and electronic measurement equipment - Expression of performance GB/T 11463-1989 reliability tests for electronic measuring instruments GB/T 11464 Electronic Measuring Instruments terms3 Terms and DefinitionsGB/T 11464 and defined by the following terms and definitions apply to this document. 3.1 Digital storage oscilloscope digitalstorageosciloscope The measured electrical signal analog to digital conversion, storage, reprocessing, and then one kind of oscilloscope display. Digital storage oscilloscopes typically should include. --- Input channels; --- Acquisition control and data storage; --- Display device; --- Output interfaces, adapters and other accessories. 3.2 Three-dimensional digital oscilloscope digitalthree-dimensionalosciloscope Not only can capture and display time signal - amplitude (event) information, but also a different luminance or color-graded display different events Probability of occurrence of digital storage oscilloscope, it usually has a high waveform capture rate. 3.3 input channels 3.3.1 Channel coupling channelcoupling A deterministic signal oscilloscope to observe what kind of pretreatment component. Use the channel coupling can decide which signal component is transmitted To the oscilloscope channel coupling generally have AC (alternating current) coupling, DC (DC) coupling and GND (ground) coupling. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15289-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 15289-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15289-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15289-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15289-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15289-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |