GB/T 15233-2025 PDF EnglishUS$215.00 · In stock · Download in 9 seconds
GB/T 15233-2025: Packaging - Unit load dimensions Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 15233: Historical versions
Similar standardsGB/T 15233-2025: Packaging - Unit load dimensions---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15233-2025GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 55.020 CCS A 80 Replacing GB/T 15233-2008 Packaging - Unit load dimensions 包装 单元货物尺寸 (ISO 3676.2012, Packaging - Complete, filled transport packages and unit loads - Unit load dimensions, MOD) Issued on: JUNE 30, 2025 Implemented on: JANUARY 1, 2026 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Plane dimensions... 6 5 Dimensional deviation... 7 Appendix A (Informative) Examples for determining the maximum unit load dimensions... 8 References... 9ForewordThis document was drafted in accordance with the provisions of GB/T 1.1-2020 Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents. This document replaces GB/T 15233-2008 Packaging - Unit load size. Compared with GB/T 15233-2008, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The term and definition of "distribution of goods" have been deleted (see 3.1 of the 2008 edition); b) The requirements for nominal dimensions have been added (see 5.1); c) The maximum deviation requirements have been changed (see 5.2 and Appendix A; see Table 1 of the 2008 edition). This document is modified in relation to ISO 3676.2012 Packaging - Complete, filled transport packages and unit loads - Unit load dimensions. The technical differences between this document and ISO 3676.2012 and their reasons are as follows. -- ISO 21067 has been replaced with the normative reference GB/T 4122.1 to adapt to technical requirements in China (see Chapter 3; see Chapter 3 of ISO 3676.2012); -- The terms and definitions of "distribution of goods", "system", "modular system" and "module" have been deleted (see 3.1, 3.2, 3.3 and 3.5 of ISO 3676.2012). These terms are not mentioned in this document or do not appear frequently enough to meet the requirements for them to be used as terms; -- The unit load dimensions "1200 mm×800 mm" and "1219 mm×1016 mm" have been deleted to be consistent with GB/T 2934 (see 4.2 and 4.4 of ISO 3676.2012); -- The normative reference GB/T 5338.1 replaces ISO 1496-1, and GB 1589 replaces EN 284, EN 452, CEN/TS 13853 and CEN/TS 14993 (see 5.2; see 5.2 of ISO 3676.2012) to adapt to technical requirements in China; -- Series 2 container dimensions have been added as the basis for determining the maximum dimensions of unit load (see 5.2) to adapt to technical requirements in China. Packaging - Unit load dimensions1 ScopeThis document specifies the plan dimensions and dimensional deviations of unit load during the cargo circulation process. This document applies to unit loads transported by road, rail and water.2 Normative referencesThe provisions of the following documents constitute the essential clauses of this document through normative references in this text. Among them, for any dated reference, only the version corresponding to that date applies to this document; for any undated reference, the latest version (including all amendments) applies to this document. GB 1589 Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles GB/T 4122.1 Packaging terms - Part 1.Basic GB/T 5338.1 Series 1 freight containers - Specification and testing - Part 1.General cargo containers for general purposes (GB/T 5338.1-2023, ISO 1496-1.2013, IDT) GB/T 35201 Series 2 freight containers - Classification, dimensions and ratings3 Terms and definitionsThe terms and definitions defined in GB/T 4122.1 and the following apply to this document. 3.1 unit load In order to facilitate loading and unloading, transportation, stacking and storage, a group of goods or packages is assembled together in one or more ways to form an integral unit. NOTE. A single large cargo is also considered a unit load. 3.2 plan dimensions The dimensions of a rectangle formed by four mutually and perpendicularly intersecting vertical planes on a horizontal plane, and the four vertical planes can enclose the unit load.4 Plane dimensions4.1 Dimensions. 1200 mm×1000 mm The preferred unit load plane dimensions shall be 1200 mm×1000 mm. NOTE. The unit load dimensions are derived from the basic modular dimensions of 600 mm×400 mm, and it is one of the components of the circulation system. 4.2 Dimensions. 1100 mm×1100 mm The plane dimensions of the unit load can be 1100 mm×1100 mm.5 Dimensional deviation5.1 Nominal dimensions The plane dimensions of a unit load described in 4.1 and 4.2 are nominal dimensions. 5.2 Maximum dimensions The maximum dimensions of a unit load shall be determined based on the container widths specified in GB/T 5338.1 and GB/T 35201, and the widths of trucks and trailers specified in GB 1589.Appendix A provides examples for determining the maximum dimensions of a unit load. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 15233-2025 be delivered?Answer: The full copy PDF of English version of GB/T 15233-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 15233-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15233-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 15233-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 15233-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15233-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 15233-2025?A step-by-step guide to download PDF of GB/T 15233-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 15233-2025". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
