GB/T 15048-1994 PDF EnglishUS$139.00 · In stock · Download in 9 seconds
GB/T 15048-1994: Cellular plastics, rigid - Determination of compressive creep Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Similar standardsGB/T 15048-1994: Cellular plastics, rigid - Determination of compressive creep---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT15048-1994GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA UDC 678.742.678.746.620.172.21 G 32 Cellular plastics, rigid - Determination of compressive creep Issued on: APRIL 12, 1994 Implemented on: DECEMBER 01, 1994 Issued by. State Bureau of Quality and Technical Supervision Table of Contents1 Subject content and scope of application... 3 2 Normative references... 3 3 Principle... 3 4 Apparatus... 3 5 Specimen... 4 6 Procedure... 4 7 Test conditions... 5 8 Expression of results... 5 9 Test report... 6 Additional information... 7 Cellular plastics, rigid - Determination of compressive creep This Standard is identical to the international standard ISO 7850-1986, Cellular plastics, rigid - Determination of compressive creep.1 Subject content and scope of applicationThis Standard specifies the method for determining the compressive creep of rigid cellular plastic specimens under specified stress, temperature and relative humidity conditions. This Standard applies to various rigid cellular plastics.2 Normative referencesGB 2918, Standard atmospheres for conditioning and testing of plastic specimens GB 6342, Cellular plastics and rubbers - Determination of linear dimensions3 PrincipleUnder specified temperature and relative humidity conditions, the specimen produces compressive deformation under constant pressure. Measure the change of compressive strain over time. Calculate the initial deformation percentage and compressive creep percentage of the specimen.4 Apparatus4.1 Test chamber A constant temperature and humidity test chamber that can meet the requirements of 7.1 and 7.2. 4.2 Thickness measuring instrument Shall comply with the requirements of GB 6342. 4.3 Loading device The loading device consists of two parallel plates and weights. The two parallel plates shall be able to compress the specimen vertically. One of the two plates is a movable plate with a guide device, and its lateral displacement shall be less than 1mm. The two parallel plates shall not deform during the test. During the test, it shall be available to measure the thickness of the sample to an accuracy of 0.1 mm. The loading device shall be kept level and free from vibration during the test.5 Specimen5.1 Shape and size The specimen shall be a rectangular parallelepiped or cylindrical object with a load- bearing cross-sectional area of at least 25 cm2 and a standard specimen thickness of 50 ± 1 mm. The minimum thickness of the specimen is 20 mm. When the thickness exceeds 50 mm, the cross-sectional area under load shall not be less than the square of the thickness. The thickness deviation between the two surfaces of the specimen being tested shall not exceed 1% of the thickness. For products with skin during use, the specimen shall retain the product skin. Test results on materials with or without skin or of different thicknesses are not comparable. 5.2 Preparation Cut the specimen from the sample, and the thickness direction of the specimen shall be consistent with the pressure direction of the product when it is finally used. The specimen can be cut with a saw, knife or other cutting tools, ensuring that the specimen is not damaged. 5.3 Number of specimens Under the same test conditions, each group shall have no less than three specimens.6 Procedure6.1 Test conditions The test shall be carried out in accordance with the standard environment and normal deviation range specified in GB 2918, and the time shall not be less than 24 hours. 6.2 Creep test method carried out by applying pressure under standard ambient conditions (Method A) 6.2.1 After state adjustment, measure the thickness of the specimen to an accuracy of 0.1 mm. Measure at least four points of each specimen and calculate the average thickness H1. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 15048-1994 be delivered?Answer: The full copy PDF of English version of GB/T 15048-1994 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 15048-1994_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15048-1994_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 15048-1994 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 15048-1994?A step-by-step guide to download PDF of GB/T 15048-1994_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 15048-1994". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
