GB/T 15042-2008 English PDFUS$374.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15042-2008: Auxiliaries for lamps -- Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements Status: Valid GB/T 15042: Historical versions
Basic dataStandard ID: GB/T 15042-2008 (GB/T15042-2008)Description (Translated English): Auxiliaries for lamps -- Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.30 Word Count Estimation: 19,127 Date of Issue: 2008-12-30 Date of Implementation: 2009-09-01 Older Standard (superseded by this standard): GB/T 15042-2005 Quoted Standard: GB 19510.1; GB 19510.2; GB 19510.10; IEC 60188; IEC 60192; IEC 60662; IEC 61167 Adopted Standard: IEC 60923-2006, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 26 of 2008 (total 139) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the high-pressure mercury lamp, low pressure sodium lamp, high pressure sodium and metal halide lamps and other discharge lamp ballast performance requirements. Chapter 12 ~ Chapter 15 specific types of ballasts are provided specific requirements. Discussed in this standard is to use the 50H or 60Hz, 1000V ac power inductive discharge lamp ballasts, lamp rated power, size and characteristics of the lamp shall comply with the appropriate provisions of the standard IEC. Note 1: For some types of discharge lamp requires the use of triggers. Note 2: For use with Shenlian capacitor or a capacitor in series with the ballast, its request is still being studied. Note 3: Ballasts for tubular fluorescent lamps Performance requirements in GB/T 14044 are given. Note 4: Already on lamps and stand-alone controller devices eventually finished products supply current harmonics law required local standards. In this regard, the lamp of the controller means as the main factor in this regard is particularly prominent. Controllers and other devices and components should work together to meet these standards. GB/T 15042-2008: Auxiliaries for lamps -- Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements ICS 29.140.30 K74 National Standards of People's Republic of China GB/T 15042-2008/IEC 60923.2006 Replacing GB/T 15042-2005 Lights for discharge lamps (excluding tubular fluorescent lamps) Performance requirements for ballasts (IEC 60923.2006, IDT) Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Definitions 1 About 4 1 General notes 5 mark 2 6 ballast can operate at different supply voltages 2 7 line power factor 2 8 Supply Current 2 9 current waveform 2 10 magnetic shield 3 11 Trigger 3 12 high-pressure mercury lamp ballast electrical requirements 3 13 low pressure sodium lamp ballasts Electrical requirements 4 14 metal halide lamp ballasts Electrical requirements 5 15 high pressure sodium lamp ballasts with electrical requirements 6 Appendix A (normative) reference ballast 8 Appendix B (normative) reference lamp 10 Annex C (normative) Test General requirements 11 Annex D (normative) to adjust the measurement results and high pressure sodium lamp ballast operating current waveform explanatory 12 Annex E (informative) Notes 14 References 15 GB/T 15042-2008/IEC 60923.2006ForewordThis standard is identical with IEC 60923.2006 "Light for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements Ballasts" (English Chinese Version). For ease of use, the standard IEC 60923.2006 made the following editorial changes. a) "IEC 60923" to the "standard", "IEC 60923 standard number" be replaced by "GB/T 15042"; b) Remove IEC 60923 foreword and introduction; "." C) used in place of a decimal point as the decimal point, ""; d) For IEC 60923.2006 and other international standards referenced in our country is equivalent to using the standard, with reference to our present standard These national standards or industry standards corresponding to international standards in place, the rest not tantamount to the adoption of international standards for our standard Registration, in this section are referenced directly (see 1.2 of this standard). This standard replaces GB/T 15042-2005 "light discharge lamps (excluding tubular fluorescent lamps) - Performance requirements for ballasts." Some of the major differences compared with the GB/T 15042-2005 of the following. --- "Should pay particular attention to those containing" lamp performance standards for ballast design information, "the increase in the 3.7 GB/T 15042 of. These data for qualified lamp operation must be followed. However, this standard does not require performance testing as a lamp ballast type tests identified Part of the syndrome. "Some form of this standard in Chapter 4 of the last paragraph; --- In GB/T 15042 Appendix A of A. 2.5.2 "consistent with other models A.2.5.1 thermal performance requirements of the discharge lamp ballasts Volume, high price. "To this standard" in line A. 2.5.1 Thermal performance requirements for other types of discharge lamp ballast reference Big volume, high price. "; --- 9.2 resistor R2 into the symbol R. The Standard Appendix A, Appendix B, Appendix C, Appendix D is a normative appendix, Appendix E, Appendix F for the informative appendix. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of electrical lighting (SAC/TC224) centralized. IEC 60662 HPS (High-pressuresodiumvapourlamps) IEC 61167 metal halide lamps (Metalhalidelamps)3 DefinitionsUsing the definition of GB 19510.10 and GB 19510.1 prescribed.4 A general description of the testThis standard specifies tests are type tests. NOTE. The standard of the requirements and tolerances are based on the type test samples provided by the manufacturer for this purpose tested and developed. This type of test sample Manufacturers should have the typical characteristics of products on the product principle, and should be as close to the center of the product value. About tolerances given in this standard can be expected Most of the products in accordance with the test sample to produce long, will meet this standard. However, due to the breadth of the product discrete, so sometimes the inevitable Now outside the specified tolerance range of the ballast. Check the count on the sampling plan and procedures, see IEC 60410. The test shall be conducted in accordance with the terms of the order, except as otherwise specified. GB/T 15042-2008/IEC 60923.2006 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15042-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 15042-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15042-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15042-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15042-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15042-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
