GB/T 15006-2009 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15006-2009: General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys
Status: Valid

GB/T 15006: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 15006-2009	259	Add to Cart	3 days	General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys	Valid
GB/T 15006-1994	319	Add to Cart	3 days	General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys	Obsolete

Similar standards

GB/T 14986.5   GB/T 14987   GB/T 14991   GB/T 13297   GB/T 38940   GB/T 38938   

Basic data

Standard ID: GB/T 15006-2009 (GB/T15006-2009)
Description (Translated English): General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H58
Classification of International Standard: 77.080.01
Word Count Estimation: 11,151
Date of Issue: 2009-06-25
Date of Implementation: 2010-04-01
Older Standard (superseded by this standard): GB/T 15006-1994
Quoted Standard: GB/T 223; GB/T 228; GB/T 238; GB/T 239; GB/T 2976; GB/T 4156; GB/T 4336; GB/T 4340.1; GB/T 10561; GB/T 20066; GB/T 20123; GB/T 22315
Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the size of the elastic alloys, General requirements test methods and inspection rules, shape, surface quality. This standard applies to elastic alloy cold-rolled strip, cold drawing materials, cold-drawn bars, cold-drawn and hot-rolled bars polished.

GB/T 15006-2009: General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys ICS 77.080.01 H58 National Standards of People's Republic of China Replacing GB/T 15006-1994 Size, shape, surface quality elastic alloy, General provisions of test methods and inspection rules Posted 2009-06-25 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 15006-1994 "elastic alloy size, shape, surface quality, test methods and inspection rules of general Provisions. " Compared with the standard GB/T 15006-1994 The main changes are as follows. --- Added "Normative references" clause; --- Add "greater than 1.80mm thickness without trimming the strip, the supply and demand sides agreed that its width tolerance allowed deviation from Table 1 of Regulation Fixed "(1994 version 1.1.1, this version 3.1.1); --- Table 1, Table 2, the thickness of the strip is not greater than the diameter of 1.80mm, cold drawing materials tolerance unified 3 after the decimal point; --- "By the agreement between the rectangular cross-section can supply cold-drawn bar" with "by agreement between the other cross-sectional shapes can supply cold-drawn Bar "(1994 version 1.3.3, this version 3.3.3); --- Table 4 hot rolling and forging material tolerances breakdown (Table 4, 1994, edition Table 4); --- "Nominal diameter of 6.0mm ~ 9.0mm hot rolled round material to be delivered into a disk" to "nominal diameter 6.0mm ~ Hot-rolled round 12.0mm material into a disk general delivery "(1994 version 1.4.2.1, this version 3.4.2.1); --- Straight bending of delivery Rolled by "not more than 6mm/m" to "not more than 5mm/m" (1994 edition 1.4.2.2, this Version 3.4.2.2); --- "Cold-drawn bars to allow a slight scratch the surface and a depth of no more than half the nominal diameter tolerances pits, pitting and straightening trace memory In the "increase" but should ensure the minimum size bars "provisions (1994 version 2.3, this version 4.3); --- Table 5 test items "Vickers hardness", "cupping test", "wound test" test method consists of "YB53-64", "YB38- 64 "and" YB37-65 "to the current standard" GB/T 4340.1 "," GB/T 4156 "and" GB/T 2976 ", add" non-metallic Inclusions "test items, test methods according to GB/T 10561. Appendix A of this standard is a normative appendix. Appendix B of this standard is an informative annex. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard is mainly drafted by. Baoshan Iron & Steel Co., Ltd., Metallurgical Industry Information Standards Institute. Drafters of this standard. Shen Yi, ROCKETS, wear strong. This standard replaces the standards previously issued as follows. --- GB/T 15006-1994. Size, shape, surface quality elastic alloy, General provisions of test methods and inspection rules

1 Scope

This standard specifies the general provisions elastic alloy size, shape, surface quality, test methods and inspection rules. This standard applies to elastic alloy cold-rolled strip, cold drawing materials, cold-drawn bars, cold-drawn and hot-rolled bars polished (forging) material.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 223 (all parts), steel and alloy chemical analysis method GB/T 228 metal materials at room temperature tensile test method (GB/T 228-2002, eqvISO 6892.1998) GB/T 238 metal material wire repeated bending test method (GB/T 238-2002, ISO 7801. 1984, IDT) GB/T 239 metal wire torsion test method (GB/T 239-1999, eqvISO 7800. 1984 (E)) GB/T 2976 Test method for metallic materials winding wire (GB/T 2976-2004, ISO 7802. 1983, IDT) GB/T 4156 Metallic materials - Sheet and strip - Erichsen cupping test (GB/T 4156-2007, ISO 20482.2003, IDT) GB/T 4336 carbon steel and low alloy steel spark source atomic emission spectrometry method (conventional method) GB/T 4340.1 Vickers hardness test - Part 1. Test method (GB/T 4340.1-1999, eqvISO 6507-1. 1997) GB/T 10561 Steel - Determination of content of nonmetallic inclusions standards diagrams microscopic examination method (GB/T 10561-2005, ISO 4967.1998, IDT) GB/T 20066 Steel and iron - Sampling and determination of chemical composition of the preparation of samples (GB/T 20066-2006 use, ISO 14284. 1996, IDT) GB/T 20123 Steel - Determination of total carbon and sulfur content of the high-frequency induction furnace combustion infrared absorption method (conventional method) (GB/T 20123-2006, ISO 15350.2000, IDT) GB/T 22315 metallic material elastic modulus and Poisson's ratio test method 3 size, shape 3.1 cold rolled strip 3.1.1 Size Cold-rolled strip dimensions and tolerances shall comply with the provisions in Table 1. Thickness accuracy level should be specified in the contract, did not specify when the press Cape Through precision delivery. Trimming not strip thickness greater than 1.80mm, upon supply and demand sides agreed that its width tolerance allowed deviation from Table 1 Provisions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15006-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15006-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15006-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15006-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15006-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15006-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.