GB/T 15000.4-2019 English PDFUS$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15000.4-2019: Directives for the work of reference materials -- Part 4: Contents of certificates, labels and accompanying documentation Status: Valid GB/T 15000.4: Historical versions
Basic dataStandard ID: GB/T 15000.4-2019 (GB/T15000.4-2019)Description (Translated English): Directives for the work of reference materials -- Part 4: Contents of certificates, labels and accompanying documentation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 01.120 Word Count Estimation: 14,151 Date of Issue: 2019-12-10 Date of Implementation: 2019-12-10 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 15000.4-2019: Directives for the work of reference materials -- Part 4: Contents of certificates, labels and accompanying documentation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Directives for the work of reference materials--Part 4. Contents of certificates, labels and accompanying documentation ICS 01.120 A00 National Standards of People's Republic of China Replaces GB/T 15000.4-2003 Guidelines for Standard Sample Work Part 4. Contents of certificates, labels and accompanying documents Part 4. Contentsofcertificates, labelsandaccompanyingdocumentation (ISO Guide31..2015, Referencematerials-Contentsofcertificates, labelsandaccompanyingdocumentation (IDT) 2019-12-10 release 2019-12-10 Implementation State Administration of Market Supervision Published by the National Standardization Administration ContentsForeword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General 2 5 Contents of product manual or standard sample certificate 2 5.1 General 2 5.2 Information required for standard sample files 3 5.3 Information required for RM certificate 5 5.4 Other useful information 6 6 Label 7 Reference 8ForewordGB/T 15000 `` Guidelines for the Work of Standard Samples '' is divided into the following 8 parts. --- Part 1. State the general provisions of standard samples in technical standards; --- Part 2. Common terms and definitions; --- Part 3. General principles and statistical methods of standard sample valuation; --- Part 4. Contents of certificates, labels and accompanying documents; --- Part 6. General rules for standard sample packaging; --- Part 7. General requirements for the competence of standard sample producers; --- Part 8. Use of certified standard samples; --- Part 9. Calibration and use of certified reference samples in analytical chemistry. This part is Part 4 of GB/T 15000. This section is drafted in accordance with the rules given in GB/T 1.1-2009. This section replaces GB/T 15000.4-2003 "Guidelines for Standard Sample Work (4) Contents of Standard Sample Certificates and Labels". versus Compared with GB/T 15000.4-2003, the main technical changes are as follows. --- Modified the standard name; --- Modified the range; --- Added definition of "standard samples" (see 3.1); --- Added definition of "certified standard sample" (see 3.2); --- Added the term "product description" (see 3.3); --- Added definition of "standard sample certificate" (see 3.4); --- Added definition of "standard sample file" (see 3.5); --- Added the term "standard sample producer" (see 3.6); --- Deleted the definition of "certificate" (see 3.1 of the.2003 version); --- Deleted the definition of "intended use" (see 3.2 in the.2003 version); --- Deleted the definition of "dangerous situation" (see 3.3 in the.2003 version); --- Added the content of the product manual or standard sample certificate, and listed the necessary information and standards of all standard sample files respectively Required information for the sample certificate and other information that can be attached (see Chapter 5); --- Removed an overview of the main content of the certificate (see Chapter 6 of the.2003 edition); --- Modified the labeling requirements (see Chapter 6, Chapter 4 of the.2003 edition). This section uses the translation method equivalent to ISO Guide 31..2015 "Contents of Standard Sample Certificates, Labels and Attached Documents". The following editorial changes have been made in this section. --- In keeping with the existing series of standards, the standard name was changed to `` Standard Sample Working Guide Part 4. Certificates, Labels and Contents of Attached Documents ''; --- Added notes and footnotes (see 3.1); --- Replace the reference ISO Guide34 cited in the text with GB/T 15000.7-2012 equivalent to the international standard. This part is proposed and managed by the National Standard Sample Technical Committee (SAC/TC118). This section was drafted. China Standardization Association. The main drafters of this section. Xu Dajun, Wu Zhongxiang, Tang Benling, He Ping, Tian Wen, Zheng Yuying, Guo Lan, Li Jinxia, Zhao Yang, Shi Yuting. The previous versions of the standards replaced by this section are. --- GB/T 15000.4-1994, GB/T 15000.4-2003.IntroductionThe International Organization for Standardization/Standards Committee (ISO /REMCO) published ISO Guide 31 in 1981 and.2000, respectively. First and second editions. Since the second edition was published, the quantity and variety of standard sample (RM) production and its use have increased significantly. Due to the increasing need for the reliability of the results obtained by analytical techniques, especially in terms of legal requirements, environmental and clinical applications Note, which brings RM for quality control purposes and verification of measurement methods, evaluation of new measurement procedures or laboratory capabilities, and instrumentation. Widespread requirements for certified standard samples (CRM) for instrument calibration. According to the definition of RM in ISO Guide 30, material homogeneity and stability information is needed. And, for CRM, all It is mandatory to have a standard value and its uncertainty and measurement traceability description at the specified confidence level. So whether it's documented or For non-certified standard samples, the content and format of the information accompanying the standard samples need to be specified. The first edition of ISO Guide 31 discusses the differences in information provided by labels, certificates, and development reports, emphasizing the concise outline of certificates. First The second edition focuses on what the CRM certificate requires. This edition introduces the concepts of "product manual" and "standard sample certificate" Information that should be contained in these RM files. For the purpose of this section, the accompanying documents of RM are "Product Manual" or "RM Certificate". Guidelines for Standard Sample Work Part 4. Contents of certificates, labels and accompanying documents1 ScopeThis part of GB/T 15000 is mainly used to help standard sample producers prepare clear and concise documents accompanying standard samples. Lists and explains the necessary, recommended, and other types of information to consider when preparing product specifications and standard sample certificates. These ones Information can be used by standard sample users and other stakeholders to confirm compliance with a standard sample or a certified standard sample. This section also sets minimum requirements for labels affixed to standard sample containers.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. ISO Guide30 Standard Samples Common Terms and Definitions (Referencematerials-Selectedtermsanddefinitions)3 terms and definitionsThe terms and definitions defined in ISO Guide 30 and the following apply to this document. 3.1 Reference material Materials that have one or more of the specified characteristics sufficiently uniform and stable have been determined to meet the intended use of the measurement process. Note 1. Standard sample 1) is a general term. Note 2. Properties can be quantitative or qualitative (for example. the properties of substances or species). Note 3. Uses can include calibration of measurement systems, evaluation of measurement procedures, assignment of values to other materials and quality control. Note 4. ISO /IEC Guide99..2007 has a similar definition (5.13), but restricts the term "measurement" to only quantitative values. However, in the ISO /IEC Guide 99..2007 (5.13) (VIM) Note 3 clearly includes qualitative characteristics, called "nominal characteristics". [ISO Guide30..2015, definition 2.1.1] 3.2 Certified reference material certified reference material; CRM A standard sample of one or more specified characteristics determined using a metrologically valid procedure, with a certificate providing the specified characteristic values and their Statement of uncertainty and measurement traceability. Note 1. The concept of value includes nominal characteristics or qualitative attributes, such as features or sequences. The uncertainty of the characteristic can be expressed by probability or confidence level. Note 2. The metrologically valid procedures used in the production and certification of standard samples are given in ISO Guide 34 and ISO Guide 35. Note 3. ISO /IEC Guide 99..2007 (5.14) has a similar definition. Note 4. Rewritten ISO Guide 30..2015, definition 2.1.2, deleted Note 3. 3.3 Productinformationsheet In addition to the certified standard samples, a file containing all necessary information for using the standard samples. [ISO Guide30..2015, definition 2.3.4] 1) Referencematerial is also translated as reference material and standard material. ...... |
