GB/T 14999.7-2010 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14999.7-2010: Test methods for grain sizes, primary dendrite spacing and micro-shrinkage of superalloy castings
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14999.7-2010	439	Add to Cart	4 days	Test methods for grain sizes, primary dendrite spacing and micro-shrinkage of superalloy castings	Valid

Similar standards

GB/T 14986.5   GB/T 14991   GB/T 14994   GB/T 14999.3   GB/T 14999.4   GB/T 14999.2   

Basic data

Standard ID: GB/T 14999.7-2010 (GB/T14999.7-2010)
Description (Translated English): Test methods for grain sizes, primary dendrite spacing and micro-shrinkage of superalloy castings
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H57
Classification of International Standard: 77.140.99
Word Count Estimation: 19,187
Date of Issue: 2010-12-23
Date of Implementation: 2011-09-01
Quoted Standard: GB/T 6394; GB/T 14992
Regulation (derived from): National Standard Approval Announcement 2010 No.10 (Total No.165)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the superalloy castings equiaxed grain size of the average grain size of macroscopic and microscopic, columnar Jingjing granularity, determination of a columnar grain and single crystal dendrite spacing and the results of microscopic loose and labeling methods.

GB/T 14999.7-2010: Test methods for grain sizes, primary dendrite spacing and micro-shrinkage of superalloy castings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for grain sizes, primary dendrite spacing and microshrinkage of superalloy castings ICS 77.140.99 H57 National Standards of People's Republic of China High temperature alloy castings Grain size, primary dendritic spacing and microscopic loosening test methods Testmethodsforgrainsizes, primarydendritespacing 2010-12-23 release 2011-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

Appendix A of this standard is an informative appendix and Appendix B is a normative appendix. This standard is proposed by China Iron and Steel Industry Association. This standard by the National Steel Standardization Technical Committee. The main drafting unit of this standard. Iron and Steel Research Institute, Metallurgical Industry Information Standards Institute. The main drafters of this standard. Yuan Ying, Yan Ping, Luan Yan, Zhao Minghan, Feng Diao, Wu Jiantao, Han Fengkui, Chen Huixia, Dai Qiang.

Introduction

This standard specifies the method for evaluating the grain size, primary dendritic spacing and microscopic loosening of high temperature alloy castings. Because basically the original The geometry of the photo is based and therefore has nothing to do with the alloy itself. If the material's tissue morphology is close to a standard picture, you can use it The standard method provided by this standard is used for the determination of the standard image corresponding to the quantitative indicators of other applicable methods for determination. The method provided by this standard applies only to the determination of two-dimensional plane (cross-section), that is, the equiaxed average and micro-average grain size Crystal grain size, columnar crystal and single crystal primary dendrites average spacing, casting micro-loose two-dimensional plane scale measurement, not suitable for three-dimensional Determination of state and scale. High temperature alloy castings Grain size, primary dendritic spacing and microscopic loosening test methods

1 Scope

1.1 This standard specifies the equiaxed macroscopic and microscopic average grain size of the superalloy castings, the columnar grain size, the columnar crystals and the single crystal The method of measuring the average spacing and microscopic relaxation of the crystal and the method of expressing the result. 1.2 This standard applies to ordinary precision casting castings, directional solidification column crystal casting grain size determination; directional solidification column crystal and single crystal casting Determination of Primary Dendritic Spacing; Determination of Micro-Loose in Ordinary Precision Cast Castings, Directionally Solidified Column Crystals and Single Crystal Castings. 1.3 This standard is only recommended as a recommended method, not on the acceptance of high-temperature alloy castings qualified level of the provisions of the provisions.

2 normative reference documents

The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard. GB/T 6394 Determination of average grain size of metals GB/T 14992 Classification and grade of high temperature alloys and intermetallics high temperature materials

3 terms and definitions

GB/T 14992 and GB/T 6394 and the following terms and definitions apply to this standard. 3.1 Equiax equiaxedgrain Three dimensions are roughly the same, no directional arrangement of grain. 3.2 Columnar columnargrain Along the direction of the orientation of the casting, parallel to the main stress axis of the casting or the entire sample, along the longitudinal direction of the grain. 3.2.1 Deviation degree The angle between the growth direction of a single columnar crystal (columnar crystal axis) and the main stress axis of the casting. 3.2.2 Divergence of divergence The angle between two adjacent columnar crystal axes. 3.2.3 Broken interruptedcolumnargrain Columnar crystals with transverse (close to the direction perpendicular to the direction of solidification). 3.3 Single crystal singlecrystal A crystal composed of a grain without grain boundaries. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14999.7-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14999.7-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14999.7-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14999.7-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.