GB/T 14984.3-2010 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14984.3-2010: Ferroalloys -- Vocabulary -- Part 3: Sieve analysis Status: Valid
Basic dataStandard ID: GB/T 14984.3-2010 (GB/T14984.3-2010)Description (Translated English): Ferroalloys -- Vocabulary -- Part 3: Sieve analysis Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H22 Classification of International Standard: 77.100 Word Count Estimation: 6,657 Date of Issue: 2010-09-02 Date of Implementation: 2011-06-01 Older Standard (superseded by this standard): GB/T 14984-1994 Adopted Standard: ISO 8954-3-1990, MOD Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and ferroalloy screening -related. This section applies to the technical requirements of ferroalloys, delivery conditions and screening. GB/T 14984.3-2010: Ferroalloys -- Vocabulary -- Part 3: Sieve analysis---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.. Ferroalloys Vocabulary Part 3. Sieve analysis ICS 77.100 H22 National Standards of People's Republic of China Replacing GB/T 14984-1994 Base section Ferroalloy Terminology - Part 3. Screens Ferroaloys-Vocabulary-Part 3. Sieveanalysis (ISO 8954-3.1990, MOD) Issued on. 2010-09-02 2011-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 14984 "Ferroalloy term" is divided into three parts. --- Part 1. Materials; --- Part 2. Sampling and sample preparation; --- Part 3. Screening. This is Part 3. The partial modification of the use of ISO 8954-3.1990 "Ferroalloys - Vocabulary - Part 3. Screens" (in English). This section according to ISO 8954-3.1990 redrafted. This section lists the control provisions of international standards and a clause in Appendix A Lanbiao. This section in the use of international standards were modified, deleted the "batch", "batch screening", "Continuous screening" three terms, with the remainder Consistent with. This part of the international standard and also made the following editorial changes. --- "This International Standard" be replaced by "this section"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Introduction of international standards and delete references. This Part replaces GB /"Ferroalloy term" corresponding section T 14984-1994. This section compared with the GB/T 14984-1994, mainly revised in the following areas. --- Remove the generic terms and term ferroalloy products; --- Remove the ferroalloy sampling and sample preparation of terminology. This section in Appendix A and Appendix B is an informative annex. This part is proposed by the China Iron and Steel Association. This part of pig iron and ferroalloy by the National Standardization Technical Committee. This section is drafted. Sinosteel Jilin Ferroalloy Co., Ltd., Metallurgical Industry Information Standards Institute, Shougang Corporation. The main drafters of this section. Liuxian Cheng, Wang Shuang, Shi Wanli Ma Qin, Zhang Rui Hong, Chenzi Bin, Zhang Lei. This part of the standard replaces the previous editions are. --- GB/T 14984-1994. Ferroalloy Terminology - Part 3. Screens1 ScopeThis section GB/T 14984 defines terms related to screening and ferroalloys. This section applies to the technical requirements of ferroalloy, delivery conditions and screening.2 screening2.1 Particle particle Ferroalloy independent aggregates. 2.2 Particle size range (sieve analysis) particlesize (insieveanalysis) Range is the smallest mesh aperture size and number of particles of iron alloy particles can not pass through the sieve apertures to set the maximum Righteousness. 2.3 The maximum particle size maximumparticlesize Measure the length of an iron alloy particle size, square mesh aperture typically the kinds of ferroalloy block 100% or with a square hole Ruler to represent. Note. The provision of various ferroalloy product size in one direction and not in the top long GB/T 13247-1991 "sampling and detection techniques ferroalloy product granularity" in It should be more than 1.5 times the maximum limit. 2.4 Specify the maximum size nominaltopsize Limit various types of ferroalloys in standards and technical requirements in terms of delivery specified size range. 2.5 Specified minimum size nominallowersize Various types of alloy in a standard delivery conditions and technical requirements stipulated in the size range of the lower limit. 2.6 Particle size classification sizefraction And a pore size Xmm Ymm (where X > Y) or double mesh aperture Xmm (or Ymm) monolayer sieve test sample process. Double Layer sieve labeled -Xmm Ymm, with a single sieve or labeled Xmm -Xmm (Ymm or -Ymm). 2.7 Oversized oversize Not by the maximum limit Xmm mesh sieve material, usually expressed in Xmm. 2.8 Undersize particle size is too small By the minimum limit Ymm mesh sieve material, usually expressed in -Ymm. 2.9 Particle size distribution sizedistribution According to particle size, particle quantitative sample packet, which represents the amount by or left on the screen of the selected percentage of the total sample. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14984.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 14984.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14984.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14984.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
