GB/T 1483.2-2008 English PDFGB/T 1483.2: Historical versions
Basic dataStandard ID: GB/T 1483.2-2008 (GB/T1483.2-2008)Description (Translated English): Gauges for caps and lamp holders -- Part 2: Gauges for pin caps and lamp holders Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.10 Word Count Estimation: 349,353 Date of Issue: 2008-04-29 Date of Implementation: 2008-12-01 Older Standard (superseded by this standard): GB 13261-1991; GB/T 1483.3-2002; GB/T 6997-2001 Quoted Standard: GB/T 230.1, GB 1312-2007, GB/T 1957, GB/T 1406.2, GB/T 1483.1, GB/T 3505, GB/T 10682, GB/T 19148.2, GB/T 21092 Adopted Standard: IEC 60061-3-2004, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the test pin caps and holders of interchangeability dimensions gauge type, size, purpose and test methods. This section applies to the design and manufacture of inspection by GB/T1406. 2 pin caps of the type and size and GB/T 19148. 2 pin lampholders type and size of production pin caps and lampholders. GB/T 1483.2-2008: Gauges for caps and lamp holders -- Part 2: Gauges for pin caps and lamp holders---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Gauges for caps and lampholders Part 2. Gauges for pin caps and lampholders ICS 29.140.10 K74 National Standards of People's Republic of China Replacing GB/T 6997-2001, GB/T 1483.3-2002, GB 13261-1991 Lamp caps and Inspection gauges Part 2. pin-type lamp holder gauge (IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesfor thecontrolofinterchangeabilityandsafety-Part 3. Gauges, MOD) Posted 2008-04-29 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 1483 "Lamp caps inspection gauge" is divided into five sections. --- Part 1. screw-on cap, the amount of the lamp holder gauge; --- Part 2. pin-type lamp holder, lamp holder the amount of regulation; --- Part 3. pre-focus lamp holder, lamp holder the amount of regulation; --- Part 4. Miscellaneous lamp, lamp holder the amount of regulation; --- Part 5. bayonet lamp holder gauge. This section GB/T 1483 Part 2. 2004 "lamp holders and the amount of test its safety and interchangeability. GB/T 1483 submissions for this section using IEC 60061-3 Regulations - Part 3. Gauges "(Version 3.34) in English. This part of IEC 60061-3.2004 English version of the relevant pin lamp holder, lamp holder gauge portion of the technical content completely Consistent. For ease of use, this section also made the following editorial changes. a) instead of as a decimal by decimal comma ",". ","; b) "this International Standard" be replaced by "this section"; c) Remove IEC 60061-3 standard preface and introduction; d) To be consistent with the existing standards and technical content in this section, the name of the international standards "," Lamp caps and holders of its inspection Interchangeability and safety gauges - Part 3. Gauges "" to "gauge Part 2" lamp, lamp holder. Pin-type lamp, Lampholder gauge '. " This Part replaces GB/T 6997-2001 "pin lamp caps gauge", GB/T 1483.3-2002 "pin lampholders gauge" and GB 13261-1991 "tubular fluorescent lamps and starter holders test gauge." This part of GB/T 6997-2001, GB/T 1483.3-2002 and GB 13261-1991 compared to major differences are. --- Pin lamp caps the amount of regulation removed the test on finished lamp cap GR8 and GR10q size M of "A" and "B" gauge. --- Pin lamp caps the amount of regulation adds. - Calibration finished lamp on the amount Fc2 cap regulation; The amount of testing printed circuit GUX2.5d cap regulation; Inspection of printed circuit GUX2.5d, GUY2.5d and GUZ2.5d A cap gauges and gauges B; Only the regulatory inspection of printed circuit GUX2.5d lamp cap; Bi-pin G1.27, GX1.27, GY1.3, G2.54, GX2.54, GY2.5, G3.17 and GY3.2 lamp through regulation; Through regulation and only regulation GU4 bi-pin lamp end; GZ4 bi-pin lamp end-gauge; G5.3-4.8 light through the end of regulation; Through regulation and only regulation GU5.3 bi-pin lamp end; Through regulation and only regulation GX5.3 bi-pin lamp end; Through regulation and only regulation GY5.3 bi-pin lamp end; GU7 light-gauge only regulation and end; Test printed circuit GZX7d-... , GZY7d-... And GZZ7d-... The amount of the cap regulation; Test printed circuit GZX7d-... , GZY7d-... And GZZ7d-... The amount of targeting key cap regulation; G7.9 GX7.9 cap and through regulation; 2G8 lamp through regulation; Inspection 2G8 cap pin diameter through regulation and only regulation; Inspection 2G8 non-interchangeable stop targeting key cap regulation; 2G8 lamp test pins through regulation; G8.5 and light-gauge only regulation ends; G9 light-gauge only regulation and end; GRX10q- finished lamp on... Lamp through regulation; GRX10q- targeting key finished with lights on... Only the rules of the lamp; GRX10q- finished lamp on... A stop lamp regulation and only regulation B; Ensure that the maximum size of the cap insert pins and holders of its test volume and pitch length GRZ10d cap regulation; Unassembled GRZ10d lamp through regulation (does not apply to finished lamp); Ensure that the maximum size of the cap insert pins and holders of its test volume and pitch length GRZ10t cap regulation; Unassembled GRZ10t lamp through regulation (does not apply to finished lamp); GU10q stop lamp through regulation and regulation; GZ10 lamp through regulation and only the regulatory side; GX12 lamp through regulation and only regulation; 2GX13 lamp through regulation A, B, and through regulation only regulation; Finished lamp G17q-7 and GY17q-7 lamp through regulation; GX17q-7 finished lamp on the lamp through regulation; Finished lamp G22 bi-pin lamp and lamp ends; GY22 amount bi-pin lamp cap regulation; GX38q four-pin lamp and a lamp through the end of regulation; GX53 lamp through regulation and only regulation; Inspection GX53 lamp holder only regulation through regulation and targeting key; Inspection GUX2.5d, GUY2.5d and GUZ2.5d self-supporting printed circuit connecting member gauge A; Gauge the amount of test GUX2.5d printed circuit piston connecting member B; Inspection GU2.5d, GUY2.5d and GUZ2.5d printed circuit connector contact performance gauge. --- Lampholders amount pin regulatory deleted GR8 lamp holder gauge; Fa4 lamp holder plug; Fa6 lamp holder through regulation and a contact regulation. --- Amount pin lampholders regulation adds. Gauge inspection GU4 lamp holder maximum insertion force and pull-out force; The minimum amount of test GU4 lamp holder clamping force regulation; GU4 lamp holder through regulation; GZ4 connection through regulation member; Inspection GZ4 GU4 lamp holder contact performance and a single pin gauge; A gauge and gauge the amount of G5.3-4.8 connecting member B; Gauge inspection GU5.3 lampholder maximum insertion force and pull-out force; The minimum amount of test GU5.3 lamp holder clamping force regulation; GU5.3 lamp holder through regulation; GX5.3 lampholder through regulation; Inspection GX5.3 lampholder connection maximum pull force gauge; Inspection GX5.3 GU5.3 lamp holder contact performance and a single pin gauge; GY5.3 lamp holder through regulation; Inspection lamp socket connector GY5.3 maximum pull force gauge; Inspection GY5.3 lampholder contact Minimum holding force of a single pin gauge; The minimum amount of test GY6.35 lamp holder contacts gripping force regulation; Inspection GU7 lampholder maximum insertion torque and pull-out torque gauge; Inspection GZX7d-... , GZY7d-... And GZZ7d-... Printed circuit connecting member gauge; Inspection GZX7d-... , GZY7d-... And GZZ7d-... Printed circuit board connector contact performance gauge; Inspection and G7.9 GX7.9 lampholder through regulation; And the amount of test G7.9 GX7.9 lampholder contact Minimum holding force regulation; Inspection 2G8 lampholder gauges A, B gauge and gauge C; Inspection 2G8 lamp holder contacts the maximum pull-out strength of a single pin gauge D; Inspection 2G8 lampholder contact Minimum holding force of a single pin gauge E; Inspection 2G8 lamp holder only regulation of non-interchangeability of F; Inspection 2G8 lamp base gauge G; Inspection lamp holder GR8 maximum insertion force and maximum extraction force and gauge A gauge B; The minimum amount of test GR8 lamp holder clamping force of Regulation C; Inspection G8.5 lampholder gauges A, B gauge and gauge C; Only the rules G8.5 lamp holder; G9 lamp holder through regulation; The minimum amount of test G9 lamp holder clamping force regulation; The amount of test G9 lamp holder contact performance regulations; G9.5 lamp holder through regulation; GRX10q-... Lamp holder through regulation and only regulation; Inspection GRZ10d lampholder maximum insertion force and maximum extraction force and gauge A gauge B; The minimum amount of test GRZ10d lamp holder clamping force of Regulation C; Inspection GRZ10t lampholder maximum insertion force and maximum extraction force and gauge A gauge B; The minimum amount of test GRZ10t lamp holder clamping force of Regulation C; Inspection GU10 lamp base maximum insertion torque and pull out the amount of regulation; Inspection GU10 and GZ10 lamp base minimum pull out torque gauge; GU10q lamp holder through regulation; The minimum amount of test GU10q lamp holder clamping force regulation; Inspection GZ10 lampholder maximum insertion torque and pull out torque gauge; GZ10q lampholder contact regulations; Inspection GX12 lampholder gauges A, B gauge and gauge C; 2GX13 lamp holder through regulation; 2GX13 lamp holder contact performance test gauge; Inspection 2GX13 lampholder minimum holding force gauge; Inspection G17q-7, GX17q-7 and GY17q-7 lamp holder contact performance of the plug; Inspection G17q-7 and GY17q-7 lamp holder through regulation; GX17q-7 lamp holder through regulation; Inspection G17q-7, GX17q-7 and the rotation regulation GY17q-7 lamp socket; GY22 lamp holder through regulation; GX38q lamp holder through regulation; Inspection GX38q lamp holder pull force gauge system; Inspection GX53 lampholder gauges A, B gauge and gauge C; Inspection GX53 lamp holder and the positioning groove-gauge only regulation; Inspection GX53 lamp holder only regulation maximum positioning groove spacing; Inspection GX53 lamp holder only regulation minimum positioning groove width. This part is proposed by the China National Light Industry Council. This part of the National Electric lighting Standardization Technical Committee (SAC/TC224) centralized. This part mainly drafted by. Beijing Institute of electric light. The main drafters of this section. Jiang Shan, Yang Xiaoping, Zhao Xiurong, Duan Yan Fang. 2005 Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety- Part 1. Lampholders, MOD) GB/T 21092 Miscellaneous lamp (GB/T 21092-2007, IEC 61549.2005, IDT)3 Product CategoriesThis section provides the gauge divided by end-use through regulation, only regulation and a contact regulation categories. 4. Technical Requirements 4.1 gauge material, face hardness and surface roughness of the main technical requirements should be consistent with GB/T 1957 requirements. 4.2 factory metrology department should verify the certificate. 5 signs, packaging 5.1 gauge of non-working surface, the following should be clear and firm signs. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1483.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 1483.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1483.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1483.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 1483.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1483.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
