GB/T 14598.14-2010 English PDFUS$439.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14598.14-2010: Measuring relays and protection equipment -- Part 22-2: Electrical disturbance tests -- Electrostatic discharge tests Status: Obsolete GB/T 14598.14: Historical versions
Basic dataStandard ID: GB/T 14598.14-2010 (GB/T14598.14-2010)Description (Translated English): Measuring relays and protection equipment -- Part 22-2: Electrical disturbance tests -- Electrostatic discharge tests Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K45 Classification of International Standard: 29.120.70 Word Count Estimation: 11,122 Date of Issue: 2010-11-10 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): GB/T 14598.14-1998 Quoted Standard: GB/T 2900.17; GB/T 2900.49; GB/T 4356; GB/T 14047; GB/T 17626.2-2006 Adopted Standard: IEC 60255-22-2-2008, IDT Regulation (derived from): Announcement of Newly Approved National Standards 2010 No. 8 (No. 163 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies requirements for electrostatic discharge test General requirements. These tests apply to the power system used for measuring relays and protection equipment, including devices used in conjunction with these control, monitoring and process interface equipment. Test purpose is to verify the test device and subjected to electrostatic discharge motivated harassment will not malfunction. The requirements of this section apply to new measuring relays and protection equipment, all tests specified type tests only. The purpose of this section is to provide: the definition of terms used, test severities, test equipment, test configuration, test procedures, acceptance criteria, test report. GB/T 14598.14-2010: Measuring relays and protection equipment -- Part 22-2: Electrical disturbance tests -- Electrostatic discharge tests---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Measuring relays and protection equipment Part 22-2. Electrical disturbance tests Electrostatic discharge tests ICS 29.120.70 K45 National Standards of People's Republic of China Replacing GB/T 14598.14-1998 Part 22-2 metric relays and protection equipment. Electrical disturbance tests --- electrostatic discharge test Part 22-2. Electricaldisturbancetests-Electrostaticdischargetests (IEC 60255-22-2.2008, IDT) Issued on. 2010-11-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 14598 "for measuring relays and protection equipment" for the multi-part series of standards, including the following sections. --- GB/T 14598.1 Electrical relays - Part 23. Contact performance; --- GB/T 14598.3 relays - Part 5. Measuring relays and protection equipment insulation coordination requirements and tests; --- GB/T 14598.4 Electrical relays Part XIV. Endurance test for electrical relay contacts - contact loads excellent First value; --- GB/T 14598.5 Electrical relays Part XV. characteristic electrical relay contacts life test test equipment specification; --- GB/T 14598.6 Electrical relays - Part 18. There are no size or generic relay; --- GB/T 14598.7 Electrical relays - Part 3. Single input dependent or independent time energizing quantity measuring relays; --- GB/T 14598.8 Electrical relays - Part 20. Protection System; --- GB/T 14598.9 metric Part 22-3 relays and protection equipment. Electrical disturbance tests - Radiated electromagnetic field disturbance test; --- GB/T 14598.10 Electrical relays - Part 22-4. Electrical disturbance tests for measuring relays and protection equipment --- electrical Fast transient/burst immunity test; --- GB/T 14598.13 Electrical relays - Part 22-1. Electrical measuring relays and protection equipment disturbance tests --- 1MHz burst immunity test; --- GB/T 14598.14 measuring relays and protection equipment - Part 22-2. Electrical disturbance tests - Electrostatic discharge tests; --- GB/T 14598.15 Electrical relays - Part 8. Thermal electrical relays; --- GB/T 14598.16 Electrical relays - Part 25. Electromagnetic emission tests measure relays and protection equipment; --- GB/T 14598.17 Electrical relays - Part 22-6. Measuring relays and protection equipment - Electrical disturbance tests --- radio Immunity to conducted disturbances induced frequency field; --- GB/T 14598.18 Electrical relays - Part 22-5. Measuring relays and protection equipment - Electrical disturbance tests --- Wave Surge immunity test; --- GB/T 14598.19 Electrical relays - Part 22-7. Measuring relays and protection equipment - Electrical disturbance tests --- Workers Frequency immunity tests; --- Part 26 GB/T 14598.20 Electrical relays. measurement of electromagnetic relays and protection equipment compatibility requirements; --- GB 14598.27 metric Part 27 relays and protection devices. product safety requirements; --- GB/T 14598.300 microprocessor transformer protection equipment requirements; --- GB/T 14598.301 microprocessor-based generator and transformer fault recorder technology requirements; --- GB /Z14598.302 ± 800kV UHVDC Control and protection equipment technology guidance. This section GB/T 14598.14 "metric Part 22-2 relays and protection equipment. Electrical disturbance tests - Electrostatic discharge tests." This section Press GB/T 1.1-2009 given rule drafting. This Part replaces GB/T 14598.14-1998 "electrical interference measuring relays and protection equipment - Part 2. Electrostatic discharge test". This portion of the GB/T 14598.14-1998 main changes are as follows. Name --- in this section to "Section 22-2 for measuring relays and protection equipment. Electrical disturbance tests --- electrostatic discharge test"; --- Detailed description of the test configuration; --- According to different functions of the device specified acceptance criteria; --- Appendix B becomes Appendix A, delete Appendix B. GB/T 14598 in this part of the translation method is equivalent to using IEC 60255-22-2.2008 "Measuring relays and protection equipment - Section 22- Part 2. Electrical disturbance tests - Electrostatic discharge tests "(in English). For ease of use, this section made the following editorial changes. a) 'this International Standard' to replace the word 'this section'; b) use a decimal point instead of a decimal point, '' ''; c) Remove the preface to international standards. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National measuring relays and protection equipment Standardization Technical Committee (SAC/TC154) centralized. This part mainly drafted by. XJ Electric Co., Ltd., Beijing Sifang Automation Co., Ltd., Nanjing NARI-RELAYS Electric Co., Ltd., Guodian Nanjing Automation Co., Ltd., the national relay protection and automation equipment for Quality Supervision and Inspection Center, Zhuhai Wan Lida Electric Co., Ltd., Beijing Purple Control Co., Ltd., Dongfang Electronics Co., Ltd., integrated into an electronic Co., Xuchang Relay Research Institute, Shanghai Relay Co., Ltd., Hebei North Heng Electric Co., Ltd., Shanghai Electric Power Automation Tianzheng tomorrow Limited, ABB (China) Co., Ltd., Schneider Electric (China) Investment Co., Ltd., Siemens Power Automation Ltd., Jiang Su Jinzhi technology stocks Limited copies. Drafters of this section. Jinquan Ren, Fan Wei, Xia Yu, Wangyou Long, Liquan Xi, Wang Lei, Hu is the right constitutional army, Du Sheng-yun, YANG Hui-xia, Wang Jiemin, Tian Jianjun, Mao Yasheng, Li Yan, Li Yao, Marsh die, Shen Jun, Deng Yingjun. This part of the standard replaces the previous editions are. --- GB/T 14598.14-1998. Part 22-2 metric relays and protection equipment. Electrical disturbance tests --- electrostatic discharge test1 ScopeGB/T 14598 in this section to GB/T 17626.2 basis, refer to the appropriate part of this publication, provides for electrostatic discharge test General Requirements for inspection. The test is applicable to measuring relays and protection equipment used in electric power systems, including for use with these devices Control, monitoring and process interface equipment. Trial is to be verified in the pilot plant and are motivated not by the malfunction of electrostatic discharge harassment. The requirements of this section apply to new measuring relays and protection equipment, all the tests prescribed only for type testing. The purpose of this section is to provide. --- The definitions of terms used; --- Test severity; --- Test equipment; --- Test configuration; --- Test procedures; --- Acceptance criteria; ---experiment report.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the edition are not applicable to the present file. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.17 Electrotechnical terminology measuring relays GB/T 2900.49 Electrotechnical terminology - Power System Protection (GB/T 2900.49-2004, IEC 60050-448.1995, IDT) GB/T 4365 Electrotechnical terminology Electromagnetic compatibility (GB/T 4365-2003, IEC 60050-161.1990, IDT) GB/T 14047 for measuring relays and protection equipment (GB/T 14047-1993, idt IEC 60255-6. 1988) GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001, IDT)3 Terms and DefinitionsGB/T 2900.17, GB/T 2900.49, GB/T 4365 and defined in GB/T 17626.2, special terms and these terms And definitions apply to this document. 3.1 Subjects means equipmentundertest; EUT The device being tested, can be a measure of the relay or a protection device. 3.2 Contact discharge method contactdischargemethod The electrode of the test generator and test equipment are kept in contact by the discharge switch within the generator to be triggered discharge a pilot plant ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14598.14-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 14598.14-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14598.14-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14598.14-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14598.14-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14598.14-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
