GB/T 14495-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14495-2009: Geometrical product specifications (GPS) -- Surface texture: Profile method -- Roughness comparison specimens for wooden pieces Status: Valid GB/T 14495: Historical versions
Basic dataStandard ID: GB/T 14495-2009 (GB/T14495-2009)Description (Translated English): Geometrical product specifications (GPS) -- Surface texture: Profile method -- Roughness comparison specimens for wooden pieces Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 17.040.20 Word Count Estimation: 8,860 Date of Issue: 2009-03-16 Date of Implementation: 2009-11-01 Older Standard (superseded by this standard): GB/T 14495-1993 Quoted Standard: GB/T 6062-2009; GB/T 12472-2003; GB/Z 20380-2006 Regulation (derived from): National Standard Approval Announcement 2009 No.2 (Total No.142) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the method of manufacturing the wooden surface roughness comparison specimens of, surface features, like block classification, surface roughness parameters, evaluation method, structure size and marking. This standard applies to sand, milling, planing, wooden cars and other methods of processing surface roughness comparison specimens. The specimens used were compared with the same structure and the same texture similar surface processing methods, assessed by visual and tactile wooden surface roughness. It also serves as a wooden surface roughness parameters selected reference. GB/T 14495-2009: Geometrical product specifications (GPS) -- Surface texture: Profile method -- Roughness comparison specimens for wooden pieces---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Geometrical product specifications (GPS) Surface texture. Profile method Roughness comparison specimens for wooden pieces ICS 17.040.20 J04 National Standards of People's Republic of China Replacing GB/T 14495-1993 Geometrical product specifications (GPS) Surface texture Profile method Wooden surface roughness comparison specimens Posted 2009-03-16 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 14495-1993 "wooden surface roughness comparison specimen." This standard compared with GB/T 14495-1993, the main contents of modification are. --- According to GB/T 1.1-2000 Standardization Guide Part 1. Structure and standard writing rules, made some editorial Modify, add standard foreword; --- In the standard technical content, such as. terms of standard names, terms and other parameters, have made consistent with the new surface architecture standards; --- Added Appendix B; --- The standard Appendix A and Appendix B is an informative annex. This standard GPS location system in Appendix B. The standard dimensions and geometry by the National Technical Committee of Standardization Technical Specification (SAC/TC240) and focal points. This standard was drafted. the machine Productivity Promotion Center, Harbin Measuring & Cutting Tool Group Co., Ltd., Times Group Corporation, Beijing Measuring and testing Research Institute. The main drafters of this standard. Wang Xinling, Lang Yan Mei, Wang Zhongbin, Wu Xun, Chen Jingyu. This standard replaces the standards previously issued as follows. --- GB/T 14495-1993. Geometrical product specifications (GPS) Surface texture Profile method Wooden surface roughness comparison specimens1 ScopeThis standard specifies the method of manufacturing a wooden surface roughness comparison specimens, the surface features, like block classification, surface roughness parameters assessment The method, structure size and marking. This standard applies to wooden surface sand, milling, planing, vehicles, and other processing methods roughness comparison specimen. The sample block is used with the same grain structure Surface treatment is similar and the same processing methods were compared by visual and tactile assessment wooden surface roughness. It also serves as wooden pieces The surface roughness parameters selected reference.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6062-2009 Geometrical product specifications (GPS) Surface texture Profile method of contact (stylus) instruments nominal Laid Sex (ISO 3274.1996, IDT) GB/T 12472-2003 Geometrical product specifications (GPS) Surface texture Profile method wooden surface roughness parameters Its value GB /Z20380-2006 Geometrical product specifications (GPS) Master Plan (ISO /T R14638.1995, MOD)3 Terms and DefinitionsGB/T 12472 and specified in the following terms and definitions apply to this standard. 3.1 Characterization of wood by machining or other processing methods have similar surface characteristics and the actual workpiece surface profile of a known arithmetic mean bias Poor specimens R Rao values.4 manufacturing methodSpecimens according to the following method of manufacturing. 4.1 electroforming method to copy the surface of the male mold. 4.2 plastic or other materials, to copy the surface of the male mold. 4.3 directly with a specific timber manufactured by the method prescribed processing surface. The moisture content of the wood should be equal to or less than the region's average level timber Equilibrium moisture content.5 surface featuresSurface roughness characteristics of specific materials and processing methods 5.1 specimen surface should only be presented to characterize it produced, and not containing a surface roughness ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14495-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 14495-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14495-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14495-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14495-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14495-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
