GB/T 14484-2008 English PDFUS$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14484-2008: Plastics -- Determination of bearing strength Status: Valid GB/T 14484: Historical versions
Basic dataStandard ID: GB/T 14484-2008 (GB/T14484-2008)Description (Translated English): Plastics -- Determination of bearing strength Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G31 Classification of International Standard: 83.080.01 Word Count Estimation: 14,159 Date of Issue: 2008-08-04 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 14484-1993 Adopted Standard: ASTM D953-2002, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of rigid plastic sheet or molded plastic bearing strength. A suitable method in which the stretching mode, compression mode B is suitable for the method. This test method is designed to obtain data associated with the project, and appropriately applied to engineering design. This standard does not involve the use of all safety -related problems between the user's responsibility to develop appropriate safety and health care measures before use, and to ensure compliance with relevant regulations. GB/T 14484-2008: Plastics -- Determination of bearing strength---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Plastics. Determination of bearing strength ICS 83.080.01 G31 National Standards of People's Republic of China Replacing GB/T 14484-1993 Plastics - Determination of bearing strength Posted 2008-08-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Significance and use of 2 5 means 2 6 Sample 4 7 Number of Sample 5 8 5 for conditioning and testing environment 9 Measure 5 10 Test speed 5 11 Procedure 5 12 The results are shown 6 13 Precision 6 14 Test Report 6 Appendix A (normative) carrying the load measuring 8 Appendix B (Informative Appendix) ASTM test precision 10ForewordThis standard is equivalent to using ASTMD953.2002 (English Version) "plastic bearing strength test methods", were part of the editorial changes and He removed the imperial units, identical in technical content. This standard replaces GB/T 14484-1993 "plastic bearing strength test method", compared with the GB/T 14484-1993 Main within Yung changes as follows. a) the standard name changed from "" plastic bearing strength test method "" to "" determine the strength of the plastic carrier ''; b) an increase of Contents Preface; c) increase the "meaning and use 4"; d) increasing the compression load and tensile load schematic; e) improve the accuracy of the sample size; f) increased accuracy. Appendix A of this standard is a normative appendix, Appendix B is an informative annex. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee of plastic (SAC/TC51) centralized. Drafting of this standard. National Quality Supervision and Inspection Center of synthetic resin. Participated in the drafting of this standard. National Plastic Products Quality Inspection Center (Beijing) Shenzhen sans Materials Testing Limited, Sinopec North Academy of National Chemical Building Materials Testing Center (Materials Testing Division), Guangzhou Blonde Technology Co., Ltd. The main drafters of this standard. Zhao Ping, Wang Jiandong, Li Jianjun, TRANSACTIONS, Yu Feng, Weng Yunxuan. This standard replaces the standard for the previous editions. --- GB/T 14484-1993. Plastics - Determination of bearing strength1 Scope1.1 standard specifies the method for determination of rigid plastic sheet or molded plastic bearing strength. A suitable stretching method wherein the mode by B applies to compression mode. 1.2 Test method available data related to design and engineering, may be suitably used in engineering design. 1.3 This standard does not involve the use of all safety-related issues, responsibility of the user prior to use to develop appropriate safety and health measures Facilities, and ensure compliance with the relevant regulations.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2918-1998 standard plastic sample conditioning and environmental tests (idt ISO 291.1997) ASTMD883 plastics-related terminology ASTMD4000 plastic material classification system ASTMD4066 injection and extrusion grade nylon grade classification system ASTMD4805 plastic standard terminology Implementation ASTME4 load test machine calibration Related Terms ASTME6 mechanical performance test3 Terms and DefinitionsAnd the following terms and definitions established ASTMD883 and ASTMD4805 apply to this standard. 3.1 Thickness of the sample specimen bearing bore diameter multiplied. 3.2 The applied load divided by the area of \u200b\u200bthe bearing, the load in Newtons (the N), to an area of \u200b\u200bsquare millimeters (mm2) as a unit. 3.3 S Chou Bearing bore bearing stress deformation of 4% when aperture. 3.4 In the main stress direction of the sample, the sample carrier from the hole center distance and the aperture ratio of the sample to the edge. 3.5 The maximum load bearing area divided by the sample under load in Newtons (N) units. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14484-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14484-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14484-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14484-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14484-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14484-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
