GB/T 14480.3-2020 English PDFUS$104.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14480.3-2020: Non-destructive testing instruments. Equipment for eddy current examination - Part 3: System characteristics and verification Status: Valid GB/T 14480.3: Historical versions
Basic dataStandard ID: GB/T 14480.3-2020 (GB/T14480.3-2020)Description (Translated English): Non-destructive testing instruments. Equipment for eddy current examination - Part 3: System characteristics and verification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N78 Classification of International Standard: 19.100 Word Count Estimation: 5,517 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Older Standard (superseded by this standard): GB/T 14480.3-2008 Quoted Standard: ISO 12718 Adopted Standard: ISO 15548-3-2008, IDT Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies the performance and testing and inspection methods of general eddy current testing systems. Through system performance evaluation, accurate characterization and comparability of eddy current testing equipment performance can be obtained. By selecting system performance, a consistent and effective eddy current testing system can be designed for specific testing activities. The auxiliary equipment used shall be characterized by the principles of this standard. This standard does not provide performance inspection indicators and inspection scope, these contents are given by the application document. GB/T 14480.3-2020: Non-destructive testing instruments. Equipment for eddy current examination - Part 3: System characteristics and verification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Non-destructive testing equipment Eddy current testing equipment Part 3: System performance and inspection) ICS 19:100 N78 National Standards of People's Republic of China Replace GB/T 14480:3-2008 Eddy current testing equipment Part 3: System performance and inspection (ISO 15548-3:2008, IDT) 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee ForewordGB/T 14480 "Non-destructive testing equipment Eddy current testing equipment" is divided into the following three parts: ---Part 1: Instrument performance and inspection; ---Part 2: Probe performance and inspection; ---Part 3: System performance and inspection: This part is Part 3 of GB/T 14480: This section was drafted in accordance with the rules given in GB/T 1:1-2009: This part replaces GB/T 14480:3-2008 "Non-destructive testing eddy current testing equipment Part 3: System performance and inspection", and Compared with GB/T 14480:3-2008, the main technical changes are as follows: ---Added the title "General Rules" (see 5:1); ---Modified the inspection level, inspection procedures, corrective measures, etc: (see 5:2, 5:3, 5:4, 5:1, 5:2, 5:3 of the:2008 edition); ---Modified the content in the implementation of the function test (see Chapter 6, Chapter 6 of the:2008 edition): The translation method used in this part is equivalent to ISO 15548-3:2008 "Non-destructive testing eddy current testing equipment-Part 3: System performance and test": This section has made the following editorial changes: --- Modify the standard name to "Non-destructive testing equipment Eddy current testing equipment Part 3: System performance and inspection": Please note that some content in this section may involve patents: The issuing agency of this section shall not be responsible for identifying these patents: This part was proposed by China Machinery Industry Federation: This part is under the jurisdiction of the National Testing Machine Standardization Technical Committee (SAC/TC122): Drafting organizations of this section: Edson (Xiamen) Electronics Co:, Ltd:, Institute of Metal Research, Chinese Academy of Sciences, Liaoning Institute of Instrumentation Co:, Ltd: The company, Beijing Institute of Aeronautical Materials, Shanghai Institute of Materials, Shanghai Institute of Aerospace Precision Machinery, Jimei University: The main drafters of this section: Lin Junming, Cai Guixi, Wang Lin, Xu Kebei, Ding Jie, Li Laiping, Li Hanlin: The previous versions of the standards replaced by this part are as follows: ---GB/T 14480-1993, GB/T 14480:3-2008: Eddy current testing equipment Part 3: System performance and inspection1 ScopeThis part of GB/T 14480 specifies the performance of the general eddy current testing system and its test and inspection methods: Through system performance evaluation, accurate characterization and comparability of eddy current testing equipment performance can be obtained: By selecting system performance, a consistent and effective eddy current testing system can be designed for specific testing activities: The auxiliary equipment used shall be characterized by the principles of this section: This section does not give performance inspection indicators and inspection scope, these contents are given by the application file:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: ISO 12718 Non-destructive testing Eddy current testing vocabulary (Non-destructive testing-Eddycurrent testing-Ter- minology)3 Terms and definitionsThe terms and definitions defined in ISO 12718 apply to this document:4 System performance4:1 General performance Eddy current testing systems are used to inspect specific products or make specific measurements, and the eddy current testing technology used should be specified: Eddy current testing system The system includes instruments, connectors (such as connecting cables, slip rings, etc:), probe components, mechanical devices, auxiliary equipment and reference test pieces: The general performance of the system includes: a) Physical properties: ---Detection speed; ---Scan path; ---Mechanical arrangement and setting, as well as the relationship between the two and the tested product: b) Performance related to calibration: ---Response characteristics to the reference test block; ---Response characteristics related to derived parameters such as coating thickness and crack depth of the tested product: c) Functional characteristics: ---Set up instruments and auxiliary equipment through buttons or on the display; ---The initial state and equilibrium state of the complex plane display; ---Test the dynamic range of the system amplitude and phase: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14480.3-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 14480.3-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14480.3-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14480.3-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14480.3-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14480.3-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
