GB/T 14093.4-2009 English PDFUS$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14093.4-2009: Environmental technical requirements of machinery products for the industry corrosion environments Status: Valid GB/T 14093.4: Historical versions
Basic dataStandard ID: GB/T 14093.4-2009 (GB/T14093.4-2009)Description (Translated English): Environmental technical requirements of machinery products for the industry corrosion environments Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A21 Classification of International Standard: 19.020 Word Count Estimation: 21,270 Date of Issue: 2009-05-06 Date of Implementation: 2009-11-01 Older Standard (superseded by this standard): GB/T 14093.4-1993 Quoted Standard: GB/T 2423.2-2008; GB/T 2423.3-2006; GB/T 2423.4-2008; GB/T 2423.5-1995; GB/T 2423.6-1995; GB/T 2423.10-2008; GB/T 2423.16-2008; GB/T 2423.17-2008; GB/T 2423.18-2000; GB/T 2423.22-2002; GB/T 2423.24-1995; GB/T 2423.33-2005; GB 4208-2008; GB/T 4768-2008 Regulation (derived from): Announcement of Newly Approved National Standards No. 7, 2009 (No. 147 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the use of industrial machinery products corrosive environment protection type and use of environmental conditions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. This section applies to the GB/T 14092. 5 environmental conditions specified in the general purpose machinery used in industrial products. This section does not apply to explosive material present in the environment and marine, ships, mines, nuclear radiation and other special environmental conditions of the product. GB/T 14093.4-2009: Environmental technical requirements of machinery products for the industry corrosion environments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Environmental technical requirements of machinery products for the industry corrosion environments ICS 19.020 A21 National Standards of People's Republic of China Replacing GB/T 14093.4-1993 Environmental technical requirements of machinery products Industrial corrosion environment Posted 2009-05-06 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Product Type of protection and use of environmental conditions 2 4 5 Technical Requirements Test Method 5 6 6 Inspection rules 8 7 signs, packaging, transportation and storage 9 Appendix A (informative) industrial corrosive atmospheres environmental protection machinery products, 10 points Annex B (informative) Environmental conditions are chosen Notes 14 Annex C (informative) Environmental test test content 16ForewordGB/T 14093 "Environmental technical requirements of machinery products" includes the following seven sections. --- GB/T 14093.1 Environmental technical requirements of machinery products hot and humid environment --- GB/T 14093.2 Environmental technical requirements of machinery products cold environment --- GB/T 14093.3 Environmental technical requirements of machinery products high altitude environment --- GB/T 14093.4 Environmental technical requirements of machinery products for the industrial corrosion environment --- GB/T 14093.5 Environmental technical requirements of machinery products dry heat environment --- GB/T 14093.6 Environmental technical requirements of machinery products Marine Environment --- GB/T 14093.7 Environmental technical requirements of machinery products mine environment This section GB/T Part of 414,093. This Part replaces GB/T 14093.4-1993 "Environmental technical requirements of machinery products industry corrosive atmospheres." Section compared with the GB/T 14093.4-1993, major changes in the following. --- According to GB/T 1.1-2000 "Standardization Guide Part 1. Structure and rules are written standard" requirements of the grid layout The formula has been modified; --- "This standard" to "this Part"; --- A reference to the standard has been updated. This section of the Appendix A, Appendix B, Appendix C are informative appendices. This part of the National Electrical and Electronic Products Environmental conditions and environmental tests for Standardization Technical Committee (SAC/TC8) and focal points. This section is drafted. Guangzhou Electric Apparatus Research Institute. The main drafters of this section. Wu Xueming, Qiu Yunlin, Liuhua Tang, Xiao Li. This part of the standard replaces the previous editions as. GB/T 14093.4-1993. Environmental technical requirements of machinery products Industrial corrosion environment1 ScopeThis section provides corrosion environment industrial machinery product protection type and environmental conditions, technical requirements, test methods, inspection regulations Then, signs, packaging, transportation and storage. This section applies to general purpose machinery industrial products GB/T 14092.5 specified environmental conditions of use. Product categories include Internal combustion engines, construction machinery, heavy machinery, material handling equipment, oil and general machinery, electrical products, instruments, machine tools, parts and general And so on. This section does not apply to the presence of explosive material under special environmental conditions and marine, ships, mines, nuclear radiation used in a production environment.2 Normative referencesThe following documents contain provisions which, through GB/T 14093 reference in this text, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2- 2.2007, IDT) GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT) GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db Damp (12h + 12h cycle) (idtIEC 60068-2-30.2005) GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (IdtIEC 60068-2-27. 1987) GB/T 2423.6-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Eb and guidance. Bump (IdtIEC 60068-2-29. 1987) GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT) GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidance. Mould growth (IEC 60068-2-10.2005, IDT) GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt (IEC 60068- 2-11. 1981, IDT) GB/T 2423.18-2000 Environmental testing for electric and electronic products Part 2. Test methods - Test Kb. Salt mist, cyclic (chloride Sodium) (idtIEC 60068-2-52.1996) GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IdtIEC 60068-2-14. 1984) GB/T 2423.24-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Sa. too on the analogue terrestrial Solar radiation (idtIEC 60068-2-5. 1975) GB/T 2423.33-2005 Environmental testing for electric and electronic products Part 2. Test methods Test Kca. high concentrations dioxide ...... |
