GB/T 13993.3-2014 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13993.3-2014: The series of optical fiber cables for telecommunication -- Part 3: Indoor optical fiber cables for generic cabling Status: Valid GB/T 13993.3: Historical versions
Basic dataStandard ID: GB/T 13993.3-2014 (GB/T13993.3-2014)Description (Translated English): The series of optical fiber cables for telecommunication -- Part 3: Indoor optical fiber cables for generic cabling Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: M33 Classification of International Standard: 33.180.10 Word Count Estimation: 13,133 Date of Issue: 12/5/2014 Date of Implementation: 4/1/2015 Older Standard (superseded by this standard): GB/T 13993.3-2001 Quoted Standard: GB/T 12357.1; GB/T 13993.4; YD/T 908; GB/T 9771.1; GB/T 9771.2; GB/T 9771.3; GB/T 9771.4; GB/T 9771.5; GB/T 9771.6; GB/T 9771.7 Regulation (derived from): Announcement of Newly Approved National Standards 2014 No. 27 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the indoor cable (hereinafter referred to as cable) structure type and suitability requirements, specifications, standard manufacturing length, fiber characteristics, mechanical properties and environmental performance. This sectio GB/T 13993.3-2014: The series of optical fiber cables for telecommunication -- Part 3: Indoor optical fiber cables for generic cabling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. The series of optical fiber cables for telecommunication Part 3. Indoor optical fiber cables for generic cabling ICS 33.180.10 M33 National Standards of People's Republic of China Replacing GB/T 13993.3-2001 Communications cable Part 3. Indoor optical fiber cabling Part 3. Indooropticalfibrecablesforgenericcabling Issued on. 2014-12-05 2015-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Category 1 3.1 General 1 3.2 Type 1 3.3 Size 2 4 requires 2 4.1 Identification chromatography 2 4.2 standard manufacturing length 2 3 4.3 fiber characteristics of fiber optic cable 4.4 Mechanical properties 6 4.5 Environmental Performance 7 4.6 Other requirements 8ForewordGB/T 13993 "communication cable" includes the following sections. --- Part 1. General; --- Part 2. Outdoor optical fiber core network; --- Part 3. Indoor optical fiber cabling; --- Part 4. Outdoor optical fiber access networks; This section GB/T 13993 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 13993.3-2001 "communications cable series - Part 3. Indoor optical fiber cabling," and GB/T 13993.3-2001 compared, in addition to editorial changes, the major technical changes are as follows. --- Standard name "communications cable series" to "communication cable"; --- Cancel the "Terminology" section (see Chapter 3, 2001 edition); --- Removed the cable core structure type specific recommendations [see 3.2c), 2001 Edition 4.1c)]; --- Cable water blocking requirements to the trunk cable outdoor section may be applicable to water-blocking material and a suitable water-blocking manner [see 3.2e), 2001 Version 4.1e)]; --- Cable combustion performance requirements in accordance with the wiring to the case may be, shall be by burning test or (and) a single combustion test [see 3.2f), 2001 Version 4.1f)]; May be appropriate protective sheath when --- termite requirements have increased [see 3.2g), 2001 edition 4.1g)]; --- Increased levels of fiber optic cable can microtubule blowoff [see 3.2j), 2001 edition 4.1h)]; --- Increasing the life of at least 15 years of requirements [see 3.2k)]; --- Single-mode fiber optic cable types involved, increasing the B1.3 class and based on ITU-TG.652.2009 specified performance requirements, B4 class and based on ITU-TG.655.2009 specified performance requirements, B6 and fiber type according to ITU-TG.657.2009 Specified performance requirements (see 3.3.1 and 43, 2001 version 4.2.1.); --- Outside the campus backbone cable, multimode fiber optic cable jacket to identify the color orange or gray, single-mode fiber optic cable jacket to identify the color to yellow or white Or black. (See Table 1, Table 1, 2001 edition); --- Increasing the length of delivery should be standard manufacturing length, but allows both parties agree otherwise (see 42, 2001. Version 5.2.); --- Fiber coating peeling force peak limit to 1.0N (see 431, 2001 Edition 5.3.1.); --- A1a and A1b class fiber core diameter tolerances to ± 2.5μm, cladding diameter tolerances to ± 1.0μm, core/clad concentricity error To not more than 1.5μm (Table 3, 2001 edition Table 3); NA --- A1a class fiber to 0.20 ± 0.015 (see table 4, 2001 edition Table 4); --- Multimode fiber transmission characteristics of a subclass has been modified by adjustment (see Table 5, 2001 edition Table 5); --- Increase the performance of the code multimode fiber, fiber type and bandwidth characteristics of the table (see Table 6); --- Increased multimode fiber macro bending loss requirements (see Table 7); --- Dispersion characteristics of single-mode fiber cabling to long ago qualified, do not check after a cable (see 4345, 2001, version 5.3.4.5...); --- Single cable (including some duplex fiber optic cable) to the FST 100N, FLT to 40N (see table 12, 2001 Edition Table 9); FST --- dual-core fiber and single fiber ribbon cable to 200N, FLT to 80N (see table 12, 2001 Edition Table 9); --- Along the wall, top, mezzanine, duct laying multi-core (with) cable FST to 440N, FLT to 130N, along the shaft, the vertical tube Road, basements, tunnels laying multi-core (tape) cable FST to 800N, FLT to 400N, and the tensile properties of fiber optic butterfly May stay the enforcement provisions in this table (see table 12, 2001 Edition Table 9); --- A brief rally at the maximum fiber strain to 0.4%, the maximum long-term tension to the optical fiber strain of 0.2% (see table 13, 2001 Edition Table 10); --- Fiber tensile strain with the phase shift method uncertainty when monitoring requirements to 0.01% (see table 13, 2001 Edition Table 10); --- Attenuation UNCERTAINTY transmission power monitoring method of monitoring to be limited to single-mode fiber, multimode fiber to be determined (see Table 13, 2001 edition Table 10); --- Minimum permissible bending radius of the cable to fiber type related, and increases the value specified (see table 14, 2001 Edition 5.4.3.1). This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part of the jurisdiction of the China Communications Standards Association. This section drafted by. Datang Telecom Technology & Industry Group, Beijing Institute of Telecommunications and beneficially through Science and Technology Co., Ltd., Zhengzhou Shi Jia Communication Technology Co., Ltd., Jiang Su Yongding Co., Ltd., Jiangsu Hengtong Photoelectric Co., Ltd., Jiangsu Tong Ding Optoelectronics Co., Ltd.. The main drafters of this section. Wang Zemin, Chi Xue dream, SONG Zhi Tacitus, when Bin, Li Ran Shan, Chen Xiaohong. This part of the standard replaces the previous editions are. --- GB/T 13993.3-2001. Communications cable Part 3. Indoor optical fiber cabling1 ScopeGB/T 13993 provisions of this part of the indoor cable (hereinafter referred to as cable) structure type and suitability requirements, specifications, manufacturing standards Length, fiber characteristics, mechanical and environmental properties. This section applies to indoor cabling with fiber optic cable, does not apply to single-wire or metal-containing optoelectronic integrated cable pairs.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 9771 (all parts) with a single-mode optical fiber communication GB/T 12357.1 communication with multimode fiber - Part 1. A1 multimode fiber characteristics GB/T 13993.4 telecommunication cables - Part 4. Outdoor optical fiber access networks YD/T 908 cable type designation Category 3 3.1 General This section is divided cable types, sizes and preparation of models in accordance with YD/T 908's. 3.2 Type Specific structure type cable should be specified in the product standard, the general requirements are as follows. a) fiber optic cable should use discrete optical fibers, the number of large core fiber optic cables and cords can also be used with multi-fiber optical fiber units. b) discrete fiber coating should adopt sleeve covering structure, a large number of cable core loose tube may also be used in the coating structure. Fiber ribbon coating layer We should adopt the loose tube coating structure. When using the skeleton or the like, discrete optical fibers or optical fiber ribbon should be no coating layer. c) the core structure type can be applied both indoors laying in a suitable manner. d) cable should be used to strengthen the non-metallic components, in addition to the cable cord, it can also be used metal reinforcing member. Outdoor section should e) trunk cable having water blocking performance, water-blocking material may be suitable and appropriate way water blocking. f) fiber optic cabling requirements by burning behavior may be, shall be by burning test or (and) a single combustion test. g) appropriate for the cable sheath LSZH polyolefin sheathed, it may also be a halogen-containing flame retardant or flame-retardant polyethylene sheath PVC Jacket, cord fiber optic cable can be applied to a single flame retardant PVC jacket or a thermoplastic polyurethane elastomer jacket. Main buildings Dry cable sheath is preferably a single beam or flame retardant grades of aluminum (or steel) - polyethylene sheath bonded. When rodent or termite requirements should be adopted Use appropriate protective sheath. h) campus backbone cable should be adapted to the shaft, the vertical pipes, basements, tunnels, underground pipelines and (or) buried laying, can be used in line with GB/T 13993.4 specified outdoor optical cable access network. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13993.3-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13993.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13993.3-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13993.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13993.3-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13993.3-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
