GB/T 13663.5-2018 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13663.5-2018: Polyethylene (PE) piping systems for water supply -- Part 5: Fitness for purpose of the system
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13663.5-2018	439	Add to Cart	4 days	Polyethylene (PE) piping systems for water supply -- Part 5: Fitness for purpose of the system	Valid

Similar standards

GB/T 15558.1   GB/T 10006   GB/T 15560   GB/T 13664   GB/T 13663.2   GB/T 13663.3   

Basic data

Standard ID: GB/T 13663.5-2018 (GB/T13663.5-2018)
Description (Translated English): Polyethylene (PE) piping systems for water supply -- Part 5: Fitness for purpose of the system
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 83.140.30
Word Count Estimation: 22,243
Date of Issue: 2018-03-15
Date of Implementation: 2018-10-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 13663.5-2018: Polyethylene (PE) piping systems for water supply -- Part 5: Fitness for purpose of the system

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyethylene (PE) piping systems for water supply--Part 5. Fitness for purpose of the system ICS 83.140.30 G33 National Standards of People's Republic of China Polyethylene (PE) piping system for water supply Part 5. System Suitability Part 5. Fitnessforpurposeofthesystem (ISO 4427-5.2007, Plasticspipingsystems-Polyethylene(PE)pipesand fittingsforwatersupply-Part 5.Fitnessforpurposeofthesystem,MOD) Published by.2018-03-15 2018-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions, Symbols, Abbreviations 1 4 Component Types and Grouping 2 5 Sample Preparation and Requirements 2 Appendix A (informative) This part of the structure changes compared with ISO 4427-5.2007 7 Appendix B (informative) Technical differences between this part and ISO 4427-5.2007 and their reasons 8 Appendix C (Normative) Test Method for Internal Pressure Sealability 9 Appendix D (Normative) External Pressure Seal Test Method 11 Appendix E (Normative) Test Method for Bending Resilience 13 Reference 16

Foreword

GB/T 13663 "Pipeline system for water supply" is divided into 5 parts. --- Part 1. General; --- Part 2. Pipes; --- Part 3. Fittings; --- Part 4. Valves; --- Part 5. System suitability. This part is GB/T 13663 part 5. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the redrafted method to amend the ISO 4427-5.2007 "Plastic Pipe System Water Supply Polyethylene (PE) Pipes and Pipes Part 5. System Suitability." This part has more adjustments in structure than ISO 4427-5.2007. Appendix A lists the number of chapters in this section and List of ISO 4427-5.2007 chapter numbered controls. This part has a technical difference compared with ISO 4427-5.2007. Relevant differences have been incorporated into the text and in the terms to which they relate The margins are marked with a vertical single line (|). A list of these technical differences and their causes is given in Appendix B. Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents. This part is proposed by China Light Industry Federation. This part is under the jurisdiction of the National Plastic Products Standardization Technical Committee (SAC/TC48). This section was drafted. Shandong Shengbang Plastic Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd., Zhejiang Weixing New Building Materials Stocks Co., Ltd., Yonggao Co., Ltd., Gudi Technology Co., Ltd., Zhejiang Zhongyuan Maple Leaf Pipe Co., Ltd., Guangdong Liansu Science & Technology Co., Ltd. Industry Co., Ltd., YaDa Group Corporation, Shandong Global Plastics Co., Ltd., Beijing Municipal Engineering Design Research Institute Co., Ltd., Hebei Quanen High-tech Pipe Industry Co., Ltd. The main drafters of this section. Jing Fabiao, Chen Jianchun, Li Dazhi, Huang Jian, Fu Zhimin, Zhang Wenlong, Chen Guonan, Li Yu, Yu Xiaoxuan, Song Qichen, Zhu Ruixia. Polyethylene (PE) piping system for water supply Part 5. System Suitability

1 Scope

This part of GB/T 13663 specifies terms and definitions, symbols, abbreviations, groups for the suitability of polyethylene (PE) piping systems for water supply. Part type, sample preparation and requirements. This part, together with other parts of GB/T 13663, applies to water temperatures not exceeding 40°C and maximum working pressure (MOP) not greater than 2.0MPa, general purpose pressure water delivery and drinking water distribution piping systems and their components. Note 1. Refer to GB/T 13663.1-2017 Appendix C for the reference pressure reduction coefficient between 20°C and 0°C to 40°C. Note 2. The purchaser or the purchaser has the responsibility to comply with the requirements of this section in accordance with the requirements of its specific application, in conjunction with relevant regulations, standards or regulatory requirements. Evaluation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 6111-2003 Test method for internal pressure resistance of thermoplastic pipes for fluid transport (ISO 1167.1996, IDT) GB/T 13663.1-2017 Polyethylene (PE) piping system for water supply - Part 1. General (ISO 4427-1.2007, MOD) GB/T 13663.3-2018 Polyethylene (PE) piping systems for water supply - Part 3. Fittings (ISO 4427-3.2007, MOD) GB/T 15820-1995 Pull-out test for connection of polyethylene pressure pipe and fittings (eqvISO 3501.1976) GB/T 19278-2003 General terms and definitions for thermoplastic pipes, fittings and valves GB/T 19806-2005 Extruded peel test of polyethylene electrofusion assemblies for plastic pipes and fittings (ISO 13955.1997, IDT) GB/T 19807-2005 Preparation of plastic pipe and fittings for combination of polyethylene pipe and fused pipe fittings (ISO 11413. 1996, MOD) GB/T 19808-2005 Tensile peeling of polyethylene fused components with a nominal outer diameter greater than or equal to 90 mm for plastics pipes and fittings Off-Test (ISO 13954.1997, IDT) GB/T 19809-2005 Preparation of plastic pipes and fittings Polyethylene (PE) pipes/pipes or pipes/pipes Hot-melt butt joint assemblies (ISO 11414.1996, IDT) GB/T 19810-2005 Determination of tensile strength and failure mode of hot-melt butt joints of polyethylene (PE) pipes and fittings (ISO 13953.2001, IDT) 3 Terms and Definitions, Symbols, Abbreviations Terms and definitions, symbols, and reductions defined in GB/T 13663.1-2017, GB/T 13663.3-2018 and GB/T 19278-2003 Abbreviations and the following terms and definitions apply to this document. 3.1 Fused connection The way in which the polyethylene fused socket fittings (or fused saddle fittings) are connected to the tubing (or fittings with socket ends). Electrofusion The Joule effect of the heat-generating element is integrated into the tube, melting the material adjacent to it, and welding the tube to the surface of the tube (or tube). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13663.5-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13663.5-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13663.5-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13663.5-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.