GB/T 13576.2-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13576.2-2008: Buttress threads with the flank angles of 3 and 30 degrees -- Part 2: General plan
Status: Valid

GB/T 13576.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13576.2-2008	169	Add to Cart	3 days	Buttress threads with the flank angles of 3 and 30 degrees -- Part 2: General plan	Valid
GB/T 13576.2-1992	199	Add to Cart	2 days	Burrress threads with 3 and 30 degress flank angle-General plan	Obsolete

Similar standards

GB/T 13319   GB/T 15054.1   GB/T 11349.1   GB/T 19799.3   GB/T 13576.4   GB/T 13576.1   

Basic data

Standard ID: GB/T 13576.2-2008 (GB/T13576.2-2008)
Description (Translated English): Buttress threads with the flank angles of 3 and 30 degrees -- Part 2: General plan
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 21.040.30
Word Count Estimation: 7,744
Date of Issue: 2008-07-30
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 13576.2-1992
Quoted Standard: GB/T 13576.1
Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the diameter and thread pitch serrated combination series. Comply with its tooth-GB/T 13576. 1's. This section applies to general purpose mechanical transmission and serrated fastening screw connection.

GB/T 13576.2-2008: Buttress threads with the flank angles of 3 and 30 degrees -- Part 2: General plan

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Buttress threads with the flank angles of 3 and 30 degrees.Part 2. General plan ICS 21.040.30 J04 National Standards of People's Republic of China Replacing GB/T 13576.2-1992 Serrated (3 °, 30 °) Thread Part 2. The diameter of the pitch series Posted 2008-07-30 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 13576 "zigzag (3 °, 30 °) thread" is divided into four parts. --- Part 1. tooth type; --- Part 2. pitch diameter series; --- Part 3. basic dimensions; --- Part 4. tolerances. This section GB/T Part of 213,576. This Part replaces GB/T 13576.2-1992 "zigzag (3 °, 30 °) thread diameter and pitch the series." This portion of the GB/T 13576.2-1992 compared to the main technical changes are. an increase in the standard range table 10 Third Series Diameter (see table 1). This part of the National Standardization Technical Committee thread (SAC/TC108) and focal points. This section is drafted. the machine Productivity Promotion Center. The main drafters of this section. Li Xiaobin. This part of the standard replaces the previous editions are. --- GB/T 13576.2-1992. Serrated (3 °, 30 °) Thread Part 2. The diameter of the pitch series

1 Scope

GB/T 13576 provisions of this section and the diameter of the thread pitch serrated combination series. Its tooth type conform GB/T 13576.1 of Provisions. This section applies to general purpose mechanical transmission and fastening serrated threaded connections.

2 Normative references

The following documents contain provisions which, through reference GB/T 13576 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 13576.1 zigzag (3 °, 30 °) threads - Part 1. tooth type GB/T 14791 threads term (GB/T 14791-1993, neq ISO 5408. 1983)

3 Terms and Definitions

Terms and definitions GB/T 14791 stipulated applies to GB/T 13576 in this section.

4 series and its diameter and pitch selection

Diameter and pitch serrated thread standard combination series in Table 1. Table 1, the preferred diameter of the first series, followed by selection of the diameter of the second series. New product design, should not use tables inside diameter of 1 third series. In Table 1, the diameter should be selected in the same row of the pitch. Preferred pitch thick black box. If you want a table outside a predetermined pitch, the selection of the diameter of the table near the corresponding pitch.

5 thread marks

Mark Standard serrated thread by thread features of the code "B", the nominal value mm diameter and lead of the pitch, code-named "P" and pitch mm M values. Nominal with "×" devided between the diameter of the lead; pitch code "P" and the pitch values in parentheses. Single Line serrated Thread, mark it should be omitted parentheses portion (codenamed pitch "P" and the pitch value). The standard left-handed serrated thread, should be added to its left-hand mark, code-named "LH". Right-handed serrated thread does not label its rotation code. Mark example. Nominal diameter 40mm, lead and pitch right-handed singlet serrated thread marks 7mm is. B40 × 7; Nominal diameter 40mm, lead is 14mm, pitch right-handed double serrated thread marks 7mm is. B40 × 14 (P7); Nominal diameter 40mm, lead and pitch to left-handed singlet serrated thread marks 7mm is. B40 × 7LH. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13576.2-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13576.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13576.2-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13576.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13576.2-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13576.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.