GB/T 13480-2014 English PDFUS$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13480-2014: Thermal insulating products for building applications -- Determination of compression behaviour Status: Valid GB/T 13480: Historical versions
Basic dataStandard ID: GB/T 13480-2014 (GB/T13480-2014)Description (Translated English): Thermal insulating products for building applications -- Determination of compression behaviour Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q25 Classification of International Standard: 91.120.10 Word Count Estimation: 11,154 Date of Issue: 6/9/2014 Date of Implementation: 12/1/2014 Older Standard (superseded by this standard): GB/T 13480-1992 Quoted Standard: ISO 5725-2; ISO 29768 Adopted Standard: ISO 29469-2008, IDT Regulation (derived from): National Standards Bulletin No. 11 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the measurement sample compression performance equipment and procedures. This Standard applies to insulation products can be used to determine the compressive creep test and insulation material under compressive stress in the short GB/T 13480-2014: Thermal insulating products for building applications -- Determination of compression behaviour---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Thermal insulating products for building applications. Determination of compression behaviour ICS 91.120.10 Q25 National Standards of People's Republic of China Replacing GB/T 13480-1992 Building insulation products - Determination of compression properties (ISO 29469.2008, IDT) Issued on. 2014-06-09 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is based on GB/T 1.1-2009 given rule drafting. This standard replaces GB/T 13480-1992 and GB/T 13480-1992 main zone "of mineral wool products compression performance test methods" Do the following. --- Modify the standard name; --- Chapter 1 will expand the "scope" in the scope of the method to all insulation products; --- Chapter 3, "Definitions" increased "by 10% compressive stress deformation" Delete "compressive load, the compression ratio limit"; --- Chapter 4, "Principle," added the relevant provisions of compressive stress at 10% deformation; --- Chapter 6, "sample" to increase the sample, the sample status of different sizes adjusted modified to (23 ± 5) ℃ environment in adjusting at least 6h; --- Chapter 7 increased the test temperature requirements; test methods are no longer distinguish between methods A and B; --- Chapter 8 increase "10% compressive stress of deformation" is calculated, and the processing method different curves have been classified; --- Increased Chapter 9, "precision"; --- Increasing the normative Appendix A "to modify the foam glass products General Test Methods." This standard uses the translation method identical with ISO 29469.2008 "Building insulation products - Determination of compression properties." This standard by the National Standardization Technical Committee heat insulating material (SAC/TC191) centralized. This standard was drafted. Nanjing Fiberglass Research and Design Institute Limited, the national glass fiber product quality supervision and inspection center. The main drafters of this standard. Hao Zheng Tao, Fang Yunwei, Madan, Cui Jun, Xu Qi, Xu Min, Huang Ying, Chen Jianming, Li Jun light. This standard replaces the standards previously issued as follows. --- GB/T 13480-1992. Building insulation products - Determination of compression properties1 ScopeThis standard specifies the measurement sample compression performance equipment and procedures. This standard applies to insulation products can be used to determine the compressive creep test Inspection and insulation in the short-term load testing process by compressive stress. This method can be used for quality control, it can also be used to obtain a reference value to calculate the design value and the reference value with a safety factor.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 5725-2 measurement methods and results accuracy (trueness and precision) Part 2. repeatability and reproducibility of a standard measurement method The basic method of [Accuracy (truenessandprecision) ofmeasurementmethodsandresults-Part 2. Basic methodforthedeterminationofrepeatabilityandreproducibilityofastandardmeasurementmethod] ISO 29768 Architectural sample size was measured with a linear thermal insulation products (Thermalinsulatingproductsforbuildingappli- cations --- Determinationoflineardimensionsoftestspecimens)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Relative deformation relativedeformation Sample withstand the load direction than the thickness decreases with the original thickness, expressed as a percentage. 3.2 Compressive strength compressivestrength δm The yield deformation ε (see Fig. IB)) or destroyed (see Figure 1a)) formed in the deformation of less than 10%, and the maximum compression load Fm initial sample cross-sectional Area ratio. 3.3 10% compressive stress deformation of compressivestressat10% strain δ10 10% of the sample did not appear in yield or damage deformation, deformation of compression that is 10% when the load F10 and ε10 initial specimen cross-sectional area ratio (See FIG. 1c) and 1d)). 3.4 Compression modulus compressionmodulusofelasticity Material proportional limit, the compression ratio of the stress and the corresponding deformation (see Fig. 1). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13480-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13480-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13480-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13480-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13480-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13480-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
