GB/T 13454.3-2013 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13454.3-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13454.3-2013	229	Add to Cart	3 days	Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds	Valid

Similar standards

GB/T 12008.2   GB/T 12672   GB/T 11547   GB/T 32366   GB/T 40006.11   GB/T 13454.1   

Basic data

Standard ID: GB/T 13454.3-2013 (GB/T13454.3-2013)
Description (Translated English): Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G32
Classification of International Standard: 83.080.20
Word Count Estimation: 10,178
Older Standard (superseded by this standard): GB 13454-1992
Quoted Standard: GB/T 2035; GB/T 2547-2008; GB/T 13454.1-2013; GB/T 13454.2-2013
Adopted Standard: ISO 14528-3-1999, MOD
Regulation (derived from): National Standards Bulletin No. 22 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the powdered melamine - formaldehyde molding compounds (MF-PMCs) performance requirements. This standard only applies to powdered melamine - formaldehyde molding compound.

GB/T 13454.3-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3... Requirements for selected moulding compounds ICS 83.080.20 G32 National Standards of People's Republic of China Replacing GB 13454-1992 Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) Part 3. Requirements for selected molding compounds Plastics-Melamine-formaldehydepowdermouldingcompounds (MF-PMCs) - Part 3. Requirementsforselectedmouldingcompounds (ISO 14528-3.1999, MOD) Issued on. 2013-11-12 2014-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 13454 "plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)" consists of the following three parts. --- Part 1. Designation system and basis; --- Part 2. Sample preparation and performance measurement; --- Part 3. Selected plastic molding requirements. This part of GB/T 13454 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. Part 2 and 3 of "formaldehyde molding compound (UF and UF/MF-PMCs) Plastic powdered urea - - formaldehyde and urea/melamine" GB/T 3403 This section points and be replaced by GB 13454-1992 "amino molding plastic." And GB 13454-1992 "aminoplast" Compared to major changes It reads as follows. --- Modify the scope of content; --- Modify the product classification; --- Modify the test items, sample preparation and test methods. This part redrafted Law Amendment uses ISO 14528-3.1999 "Plastics powdered melamine - formaldehyde molding compound (MF- PMCs) - Part 3. Requirements for selected molding compounds. " This part of ISO 14528-3.1999 as compared to the presence of changes in technology, changes in the terms of those involved has been through in its outer margin bits Opposed to a single vertical line (|) have been marked, in Appendix B gives the contents of the corresponding technological change and its causes. Information on normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, adjust the set As reflected in Chapter 2, "Normative references", the specific adjustments are as follows. • Use identical with international standards GB/T 13454.1-2013 instead of ISO 14528-1.1999; • Use revise international standards of GB/T 13454.2-2013 instead of ISO 14528-2.1999; • Use identical with international standards GB/T 2035 instead of ISO 472.1999; · Normative references Delete the ISO 2112.1990; · Normative references increased by GB/T 2547-2008. This section also made the following editorial changes. --- Modify the scope of content; --- With "ρv" instead of "ρe", "ρs" instead of "σe"; --- Delete the footnote to Table 1 and Table 2; --- Increased in Appendices A and B. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Technical Committee of Standardization Technical Committee plastic thermosetting plastics (SAC/TC15/SC11) centralized. This section is drafted. Changshu Southeast Plastic Co., Ltd. Shaxian Hongguang Chemical Co., Ltd. Chenguang Chemical Research Institute Co., The company, Guangdongrongtai Industrial Co., Ltd., Shandong Billiton Bo Plastics Co., Ltd., the National Quality Supervision and Inspection Center of synthetic resin. Drafters of this section. Wei Wei, Yang Leen, Wang Qiang, Chen Jian, Chen Yingui, Chen Dongyang, Peng Jianjun. This part of the standard replaces the previous editions are. --- GB 13454-1992. Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) Part 3. Requirements for selected molding compounds

1 Scope

GB/T 13454 in the provisions of this part of the powdered melamine - formaldehyde molding compounds (MF-PMCs) performance requirements. This section only applies to powdered melamine - formaldehyde molding compound.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2035 plastic terms and definitions (ISO 472.1999, IDT) GB/T 2547-2008 plastic sampling method GB/T 13454.1-2013 plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 1. Designation system and sub Basics (ISO 14528-1.1999, IDT) GB/T 13454.2-2013 plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 2. Sample preparation and sexual Can be measured (ISO 14528-2.1999, MOD)

3 Terms and Definitions

GB/T 2035, the terms and definitions GB/T 13454.1-2013 and GB/T 13454.2-2013 defined apply to this document.

4 Requirements

4.1 Performance Value Powdered melamine - formaldehyde molding compound shall conform to Table 1 or Table 2 given performance requirements. Table 1 and Table 2 shows the average value of a group is a performance measurement sample. Individual measured values \u200b\u200b2.1,2.2,2.3 and 2.4 Performance Deviation from the average should be within 10%; deviation of the individual measured values \u200b\u200bof 3.1 and 3.2 and the average performance should be within 5 ℃ of. Rheological properties of molding and did not give particularly limited. However, a suitable rheological properties and formability are essential to meet the molding compound used, Both parties should agree on its test methods and test conditions. In addition, for some applications, you may also want to get some other relevant data, such as. --- Curing time; --- Particle size; --- Moisture content. If necessary, these properties and the use of test methods and test conditions should also be agreed between supply and demand. 4.2 filler type and content Powdered melamine - formaldehyde molding compound, filled/reinforced material name, form and content should be consistent with GB/T 13454.1- ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13454.3-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13454.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13454.3-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13454.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.