GB/T 13441.2-2008 English PDFUS$294.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13441.2-2008: Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1Hz to 80Hz) Status: Valid
Basic dataStandard ID: GB/T 13441.2-2008 (GB/T13441.2-2008)Description (Translated English): Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1Hz to 80Hz) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Z32 Classification of International Standard: 13.160 Word Count Estimation: 15,163 Date of Issue: 2008-09-27 Date of Implementation: 2009-05-01 Quoted Standard: GB/T 13441.1-2007; ISO 8041; IEC 61260-1995 Adopted Standard: ISO 2631-2-2003, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 16 of 2008 (No. 129 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the troubles associated with occupant comfort and a building exposed to human body vibration and shock, provides measurement and evaluation methods, including measurement direction and measurement position determination. Defines the applicable frequency range 1Hz ~ 80Hz frequency counter weights Wm, in this frequency range without explicitly building occupants posture. Note 1: If a clear position occupants, can be applied to GB/T 13441. 1 given frequency weighting value Wm. Although usually a pilot study of a building is very effective, but at the design stage of the building or can not enter the case of existing buildings, this section contains the equivalent concept should be applied to the building. In these cases, it must in some way into the vibration of the building GB/T 13441.2-2008: Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1Hz to 80Hz)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 2. Vibration in buildings (1Hz to 80Hz ICS 13.160 Z32 National Standards of People's Republic of China GB/T 13441.2-2008/ISO 2631-2.2003 Mechanical vibration and shock human exposure to body Vibration in the building. evaluation of vibration - Part 2 (1H ~ 80H z z) (ISO 2631-2.2003, IDT) Posted 2008-09-27 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions Building vibration measurement 4 2 5 human response to vibration of the building 2 Appendix A (normative) frequency weighting value Wm mathematical definition 4 Annex B (informative) Guide to collect data about the human response to vibration of the building 7 Reference 9 GB/T 13441.2-2008/ISO 2631-2.2003ForewordGB/T 13441 "Mechanical vibration and shock of human exposure to whole-body vibration evaluation" is divided into four parts. --- Part 1. General requirements; --- Part 2. Vibration in buildings (1Hz ~ 80Hz); --- Part 4. Evaluation Guide vibration and rotational motion on the fixed rail transportation system in the passenger and crew comfort impacts; --- Part 5. Impact Evaluation Methods include multiple vibration. This section GB/T 13441 Part 2. This part identical with ISO 2631-2.2003 "Mechanical vibration and impact evaluation of human exposure to whole body vibration - Part 2. Building Vibration inside buildings (1Hz ~ 80Hz) "(in English). For ease of use, this section made the following editorial changes. --- With "this Part" instead of "ISO 2631 in this section"; --- With a decimal point as a decimal symbol instead of ",". ","; --- To ISO 2631-2.2003 references other international standards, have been adopted as the equivalent of a standard, instead of using our standard correspondence International standards, while others direct reference to international standards. Appendix A of this section is normative appendix, Appendix B is an informative annex. This part of the National mechanical vibration, shock and condition monitoring Standardization Technical Committee (SAC/TC53) and focal points. This section drafted by. China Academy of Railway Sciences, Beijing Institute of Technology. The main drafters of this section. Ma Yun, Jiao Dahua, Gregory, Initial Idea Guo Junyu, Wushao Bin, Zhao Yanan, Chen Xuemei. GB/T 13441.2-2008/ISO 2631-2.2003IntroductionStructure of human exposure to vibration in buildings, occupants can perceive and affect them in many ways. More important it is to live Comfort and quality of life of those who will be lowered. For vibration on human comfort in buildings and annoyance evaluation of the impact of the priority use of vibration total weight. By giving the building The suitability of a location indication to indicate characteristics of people in the building location or place, with the value of the appropriate frequency weighting obtained. This section is intended to encourage the adoption of a unified data collection method for building human vibration response. GB/T 13441.2-2008/ISO 2631-2.2003 Mechanical vibration and shock human exposure to body Vibration in the building. evaluation of vibration - Part 2 (1H ~ 80H z z)1 ScopeGB/T his section deals with the comfort of the occupants T 13441 and worries associated buildings exposed to the human body vibration and shock, Regulation Set the measurement and evaluation methods, including measurement direction and measurement position determination. Defined in the applicable frequency range of 1Hz ~ 80Hz frequency Meter weights Wm, in this frequency range without a clear position within the building occupants. Note 1. If the occupants a clear position, can be applied GB/T 13441.1 given frequency weighting value Wm. Although the building is usually for a pilot study it is very effective, but at the design stage of the building into the existing building or impossible Under the circumstances, the concept contained in this section shall be equally applicable to the building. In these cases, you must use some method of building vibration ring It should be forecast. Structural damage to the building situation may exist, this section does not provide guidance, see relevant content GB/T 14124. In addition, this section Not for human health and safety evaluation of the influence. This section does not allow vibration predetermined value. Note 2. Before you gather more information related to this section, it is not yet given allowable vibration guide values. Frequency weighting given value Wm mathematical definition in Appendix A, is given in Appendix B to complain about building vibration data mining Set guidelines.2 Normative referencesThe following documents contain provisions which, through reference GB/T 13441 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 13441.1-2007 Mechanical vibration and shock of human exposure to whole body vibration evaluation - Part 1. General requirements (ISO 2631-1.1997, IDT) ISO 8041 for vibration measuring instruments IEC 61260.1995 electric acoustic octave and fractional octave filters3 Terms and DefinitionsThe following terms and definitions apply to this part of the GB/T 13441 of. 3.1 Including surveys, measurement, processing, sorting, description, classification and a series of activities related to data presentation. 3.2 Static structure for human habitation or other activities, including offices, factories, hospitals, schools and day-care centers. 3.3 From the start and end time of the day to determine the vibration source activity cycle or duration of action. GB/T 13441.2-2008/ISO 2631-2.2003 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13441.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13441.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13441.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13441.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
