Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 13288.3-2009 English PDF

Q: How long will the true-PDF of English version of GB/T 13288.3-2009 be delivered?

Upon your order, we will start to translate GB/T 13288.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 13288.3-2009_English with my colleagues?

Yes. The purchased PDF of GB/T 13288.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13288.3-2009: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13288.3-2009	234	Add to Cart	3 days	Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of	Valid

Similar standards

GB/T 13912 GB/T 11376 GB/T 13911 GB/T 13288.4 GB/T 13288.2 GB/T 13288.5

Basic data

Standard ID: GB/T 13288.3-2009 (GB/T13288.3-2009)
Description (Translated English): Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A29
Classification of International Standard: 25.220.10
Word Count Estimation: 12,168
Date of Issue: 2009-03-09
Date of Implementation: 2009-11-01
Adopted Standard: ISO 8503-3-1988, IDT
Regulation (derived from): Announcement of Newly Approved National Standards 2009 No. 2 (total 142)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the line with GB/T 13288. 1 requirements of ISO surface profile comparators for the calibration and surface roughness measurement method Focusing microscope procedure. This section can be used to clean up after spraying substantially planar, the average peak-valley difference in hy = 20��m ~ 200��m range of steel surface roughness measurement. If it is impossible to directly observe the surface roughness should be cleaned in the jet on a substrate surface or a representative copy surface area (see Appendix E) on the determination of surface roughness. An alternative method, see ISO 8503-4.

GB/T 13288.3-2009: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 3. Method for the calibration of ISO surface profile comparators and for the determination of surf ICS 25.220.10 A29 National Standards of People's Republic of China GB/T 13288.3-2009/ISO 8503-3. 1988 Before application of paints and surface treatment of steel Surface roughness characteristics of blast-cleaned steel post Part 3. ISO calibration of surface roughness comparison specimens Registration and surface roughness measurement method Focusing microscope method (ISO 8503-3. 1988, IDT) Posted 2009-11-01 2009-03-09 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 13288 "steel substrates before application of paints and spray cleaned steel surface roughness characteristics" is divided into the following sections. --- Part 1. Technical requirements for the Assessment of blast - cleaned steel surface roughness of ISO surface profile comparators and definition; --- Part 2. Determination after abrasive blast cleaning of steel surface roughness comparison specimens class method; --- Part 3. Calibration and surface roughness measurement method ISO surface roughness comparison specimens microscope focusing method; --- Part 4. ISO calibration of surface roughness and surface roughness comparison specimens measuring method stylus method; --- Part 5. Determination of surface roughness Replica tape method. This section GB/T 13288 Part 3. This section identical with ISO 8503-3. 1988 "before and after application of paints and surface treatment of steel surface roughness characteristics of blast - cleaned steel Part 3. Calibration and surface roughness measurement method ISO surface roughness comparison specimens microscope focusing Law "(in English). This section is equivalent translation ISO 8503-3. 1988. For ease of use, this section made the following editorial changes. --- "This International Standard" be replaced by "this section"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- With a comma "," instead of a comma as described, ""; --- Remove the foreword and introduction of international standards. This section of the Appendix A, Appendix B and Appendix C are normative appendices, Appendix D and Appendix E is an informative annex. This part is proposed by the China State Shipbuilding Corporation. This part of the National Standardization Technical Committee before painting and metal surface treatment and painting processes Technical Committee paint pigment (SAC/TC5/SC6) centralized. This section drafted by. China Shipbuilding Technology and Economy Research Institute, China Shipbuilding Industry Corporation 11th Institute, Shandong Kai Tai Metal Abrasive Co., Ltd. The main drafters of this section. Song Yanyuan, Fu Jianhua, Liubing Yang, Liuru Wei, Zhao Hongbo, Yin Jianguo. GB/T 13288.3-2009/ISO 8503-3. 1988 Before application of paints and surface treatment of steel Surface roughness characteristics of blast-cleaned steel post Part 3. ISO calibration of surface roughness comparison specimens Registration and surface roughness measurement method Focusing microscope method

1 Scope

This section GB/T 13288 specifies the calibration surface and in line with GB/T 13288.1 requirements of ISO surface profile comparators block Determination of roughness microscope focusing methods. Roughness measurement. If the surface roughness can not be directly observed, injection should be cleaned on a substrate has a surface area representative or Determination of surface roughness on a copy of the surface (see Appendix E). Note. In the right place, this assay can also be used to evaluate the surface roughness by the other abrasive blast cleaning of the substrate. An alternative method, see ISO 8503-4.

2 Normative references

The following documents contain provisions which, through reference GB/T 13288 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Part 1 Steel Surface roughness characteristics of blast - cleaned steel substrates before GB/T 13288.1-2008 coated paint Score. used to assess the technical requirements and definitions (ISO 8503-1 after blast - cleaned steel surface roughness ISO surface roughness comparison specimens of. 1988, IDT) ISO 4618 Paints and varnishes - Terms and definitions ISO 8503-21) steel surface blast cleaned steel substrates before application of paints roughness characteristics - Part 2. Abrasive jet Determination of surface roughness after exit cleaned steel grade comparison specimen method ISO 8503-4 steel surfaces coated with paint spray steel surface treatment after cleaning roughness characteristics - Part 4. ISO table Calibration and surface roughness comparison specimens surface roughness measuring method stylus method ISO 8504-22) before application of paints and surface treatment of steel surface treatment method - Part 2. Abrasive blast - cleaning 1) GB/T 13288-1991 of reference adopted ISO 8503. 1985. 2) GB/T 18839.2-2002 is equivalent to ISO 8504-2.2000.

3 Terms and Definitions

GB/T 13288.1-2008 and terms and definitions established ISO 4618 applies to GB/T 13288 in this section. Principle 4 Viewing area the sample surface was observed with a microscope in a predetermined specified. According to the observation area to adjust the focal length of the microscope objective, determined by the same GB/T 13288.3-2009/ISO 8503-3. 1988 ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13288.3-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13288.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13288.3-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13288.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.