GB/T 13234-2018 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13234-2018: Determination of energy savings in organizations Status: Valid GB/T 13234: Historical versions
Basic dataStandard ID: GB/T 13234-2018 (GB/T13234-2018)Description (Translated English): Determination of energy savings in organizations Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F04 Classification of International Standard: 27.010 Word Count Estimation: 14,124 Date of Issue: 2018-09-17 Date of Implementation: 2019-04-01 Older Standard (superseded by this standard): GB/T 13234-2009 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 13234-2018: Determination of energy savings in organizations---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Energy consumption calculation method) ICS 27.010 F04 National Standards of People's Republic of China Replace GB/T 13234-2009 Energy consumption calculation method (ISO 50047.2016, Energysavings-Determinationofenergysavings Published on.2018-09-17 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 13234-2009 "Enterprise Energy Savings Calculation Method", this standard is compared with GB/T 13234-2009, mainly The technical changes are as follows. --- Revise the scope of application for the calculation of energy-saving capacity of energy-using units, secondary energy-using units, or energy-using units; delete "other The calculation of the energy consumption of energy-using units, regions, and countries can also be referred to "" (Chapter 1, Chapter 1 of the.2009 edition); --- Added "normative references" (see Chapter 2); --- Revised the definition of "energy saving amount"; deleted "enterprise energy saving amount", "product energy saving amount", "output value saving amount", "technical measures energy saving amount" Terms and definitions of “product structure energy savings”, “single energy energy savings” and “energy saving rate”; increased “energy performance” and “energy performance change” Advance measures "Boundary" "Base period" "Report period" "Energy benchmark" "Related variables" "Normalized" "Unconventional adjustment" "Static factor" Language and definition (see Chapter 3, Chapter 3 of the.2009 edition); ---Modified the standard structure, deleted the "classification of enterprise energy savings" (see Chapter 3 of the.2009 edition); added "General Principles" (see Chapter 4), “Computational Energy Savings by Whole Method” (see Chapter 5), “Measurement Method for Calculating Energy Savings” (see Chapter 6), “Calculation of Energy Saving Rate” (See Chapter 7), “Requirements” (see Chapter 8) and “Reports” (see Chapter 9). Will "the basic principles of enterprise energy savings calculation" (see Chapter 4 of the.2009 edition), “Calculation of energy savings for companies” (see Chapter 5 of the.2009 edition) and “Calculation of energy savings” (see The contents of Chapter 6 of the.2009 edition have been revised to include this standard. This standard uses the redrafting method with reference to ISO 50047.2016 “Determining the Energy Savings of Energy Saving Organizations”, with ISO 50047. The degree of consistency in.2016 is non-equivalent. This standard is proposed and managed by the National Energy Foundation and Management Standardization Technical Committee (SAC/TC20). This standard was drafted. China National Institute of Standardization, China Chemical Information Center, Fangyuan Mark Certification Group Co., Ltd., Beijing Zhicheng Hong Industry Intelligent Control Technology Co., Ltd., Shenzhen Green Creation Living Environment Promotion Center, Shenzhen New Central Energy Technology Co., Ltd. The main drafters of this standard. Chen Haihong, Li Pengcheng, Liu Meng, Tian Jianwei, Lin Biao, Xu Qingping, Sun Zhihui, Zhang Wei, Chen Lili, Liu Yang, Zhong Ru Shi. The previous versions of the standards replaced by this standard are. ---GB/T 13234-1991, GB/T 13234-2009. Energy consumption calculation method1 ScopeThis standard specifies the general rules, the overall method, the measure method, the calculation of the energy saving rate, and the calculation of the energy saving amount. And reports. This standard applies to the calculation of the energy savings of energy-using units, secondary energy-using units or energy-using units.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2589 General rules for comprehensive energy consumption calculation GB/T 23331 Energy Management System Requirements (GB/T 23331-2012, ISO 50001.2011, IDT) GB/T 28750 Energy Measurement and Verification Technology General GB/T 32045 Energy Measurement and Verification Implementation Guide3 Terms and definitionsThe following terms and definitions as defined in GB/T 23331 apply to this document. 3.1 Energy saving The amount of energy consumption/energy consumption reduced under the condition of meeting the same needs or achieving the same purpose. 3.2 Energy performance Measurable results related to energy efficiency, energy use and energy consumption. Note. Rewrite GB/T 23331-2012, definition 3.12. 3.3 Energy performance improvement measures energyperformanceimprovementaction; EPIA Energy saving measures energyconservationmeasures A method or action that has been planned or taken within an organization to improve energy efficiency, reduce energy consumption, or improve energy use. Note. Rewrite GB/T 28750-2012, definition 3.1. 3.4 Boundary boundary Physical boundaries and site boundaries determined by energy units. Note 1. A boundary can be a process or a group of processes, a site, an independent device or system, a complete energy unit or an energy unit. Multiple locations. Note 2. The boundary of the energy unit can be different from the boundary used to determine the energy savings. Note 3. The boundary for determining energy savings may include one or more boundaries, such as one or more energy performance improvement measures, or a portion of energy use units. Note 4. Rewrite GB/T 23331-2012, definition 3.1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13234-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 13234-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13234-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13234-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13234-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13234-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
