GB/T 13217.6-2008 English PDFUS$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13217.6-2008: Test method for relative tinting strength of liquid ink Status: Obsolete GB/T 13217.6: Historical versions
Basic dataStandard ID: GB/T 13217.6-2008 (GB/T13217.6-2008)Description (Translated English): Test method for relative tinting strength of liquid ink Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y44 Classification of International Standard: 87.080 Word Count Estimation: 8,850 Date of Issue: 2008-12-30 Date of Implementation: 2009-09-01 Older Standard (superseded by this standard): GB/T 13217.6-1991 Quoted Standard: QB/T 1012-1991 Regulation (derived from): National Standard Approval Announcement 2008 No.24 (Total No.137) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies test methods liquid ink coloring power. This standard applies to the apparent viscosity range (measured viscosity range in 25s ~ 130s or coated with 4 cups) of ink 0. 05Pas ~ 0. 25Pas. GB/T 13217.6-2008: Test method for relative tinting strength of liquid ink---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test method for relative tinting strength of liquid ink ICS 87.080 Y44 National Standards of People's Republic of China Replacing GB/T 13217.6-1991 Liquid ink color strength test method Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 13217.6-1991 "plastics gravure printing inks Test method tinting strength test." This standard and GB/T 13217.6-1991 main differences are as follows. --- Standard name was changed to "liquid ink color strength test methods"; --- Ambient temperature index has been adjusted to cancel the humidity requirements; --- Canceled Appendix A. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee ink. This standard was drafted. Zhejiang Yong Chemical Co., Ltd. Yip's Ink (Zhongshan) Co., Ltd., Hangzhou Toka Ink Chemical Co., Ltd., Tianjin Toyo Ink Co., Ltd., Shanghai Modern Environmental Engineering Technology Co., Ltd. The main drafters of this standard. Wu Min, Wushao Tang, Huangrong Hai, Zhang Jinmei, Wang Yaming. This standard replaces the standards previously issued as follows. --- GB/T 13217.6-1991. Liquid ink color strength test method1 ScopeThis standard specifies the test method of liquid ink coloring power. This standard applies to the apparent viscosity in the range of 0.05Pa · s ~ 0.25Pa · s (Tu 4 cup or measuring the viscosity in the range of 25s ~ 130s) Ink.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. QB/T 1012-1991 offset printing paper Principle 3 White ink to quantify the sample and standard samples are diluted, after comparing the concentration of dilute ink, expressed as a percentage.4 Tools and Materials4.1 Sample scratch paper. 80g/m2 offset paper (in line with QB/T in the 1012-1991 A level) Specifications 210mm × 70mm, the top Down 130mm Department has 20mm wide black bars indicate the ground. 4.2 series with white ink and black ink. 4.3 palette knife. 4.4 weighing bottle. capacity 50mL. 4.5 Analytical balance. accuracy of 0.001g. 4.6 blade. 4.7 scrubbing solvent. liquid inks of different systems using the same system only solvent.5 Test conditions5.1 test should be carried out at a temperature of (23 ± 2) ℃ conditions. 5.2 inspection shall be carried out under standard illuminant D65. Step 6 test 6.1 on an analytical balance weigh 1g and 10g sample of ink with white ink weighing bottle. Using the same method, the same proportion, weighed and standard inks White ink, mix thoroughly with a palette knife. 6.2 dilute the ink and mix thoroughly, take a small amount of standard samples, samples of paper placed in the upper left scraping; take a small amount of sample, placed in the top right scraping samples of paper, rather than the two adjacent Coupled with top-down blade to scrape ink length 80mm ~ 100mm, reducing the interior angle of the blade angle, the ink painted thick ink layer, as shown in Figure 1 FIG. ...... |
