GB/T 13182-2007 English PDFUS$679.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13182-2007: Thallium-activated sodium iodide scintillator and scintillation detectors of sodium iodide (thallium) Status: Valid GB/T 13182: Historical versions
Basic dataStandard ID: GB/T 13182-2007 (GB/T13182-2007)Description (Translated English): Thallium-activated sodium iodide scintillator and scintillation detectors of sodium iodide (thallium) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F88 Classification of International Standard: 27.120.01 Word Count Estimation: 26,268 Date of Issue: 2007-07-13 Date of Implementation: 2008-03-01 Older Standard (superseded by this standard): GB/T 13182-1991 Regulation (derived from): China Announcement of Newly Approved National Standards No. 8, 2007 (No. 108 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the NaI (Tl) scintillator and sodium iodide (Tl) scintillation detector product classification, technical requirements, test methods, inspection rules and signs, packaging, transport, storage and accompanying documents. This standard applies to the X and �� -ray measurements of sodium iodide (Tl) scintillator and sodium iodide (Tl) scintillation detector. This standard does not apply to special requirements or special applications (eg for CT) of sodium iodide (Tl) scintillator and sodium iodide (Tl) scintillation detector. GB/T 13182-2007: Thallium-activated sodium iodide scintillator and scintillation detectors of sodium iodide (thallium)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Thallium-activated sodium iodide scintillator and scintillation detectors of sodium iodide (thallium) ICS 27.120.01 F88 National Standards of People's Republic of China Replacing GB/T 13182-1991 NaI (Tl) scintillator and NaI (Tl) scintillation detector Posted 2007-07-13 2008-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Definitions and symbols 1 4 Product Category 3 5 Technical requirements 6 scintillator 6 scintillator Test Method 7 7 scintillation detector technical requirements 11 8 scintillation detector 12 Test Method 9 inspection rules 13 10 signs, packaging, transportation, storage and accompanying documents 13 Appendix A (informative) NaI (Tl) scintillator crystal size and dimensions 16 Appendix B (normative) of sodium iodide (Tl) scintillator standard sample 20 Prevailing environmental conditions in Appendix C (normative) of sodium iodide (Tl) scintillator 21 1 cylinder and the sheet scintillator Code 5 2 well type and well-type scintillation side code 5 Figure 3 rectangular scintillator code 5 Figure 4 scintillation detectors model 5 Figure 5 scintillator or scintillation detector test equipment block diagram 9 Table 1 model and shape of the scintillator 4 Table 2 scintillator energy resolution of 6 Table 3 Test Reference conditions and standard test conditions 8 Table 4 scintillation detector energy resolution of 11 Table 5 List of scintillator 13 test items List 14 Table 6 scintillation detector test itemsForewordThis standard replaces GB/T 13182-1991 "NaI (Tl) scintillation detector" (hereinafter referred to as the original standard). This standard is based on the original standard text on the original summary implement standards, implementation experience, combined with a decade of nuclear radiation detection technology Progress and development of products and prepared. Since the GB 13181-1991 "NaI (Tl) scintillator" has been revised to GB/T 13181-2002 "Methods for measuring performance scintillator" Discard about sodium iodide (Tl) scintillator (hereinafter referred to simply scintillator) product content standards, and sodium iodide (Tl) scintillation detector (hereinafter may be Referred scintillation detectors) by a scintillator and photomultiplier tubes, and the measurement of the scintillator also need to configure a photomultiplier tube, so scintillator and Sparkle Shuo detectors are closely related, and have many of the same technical requirements, such as. --- Energy resolution, detection efficiency, the background level (counts) and other general performance characteristics; --- For operating temperature, storage temperature and humidity constant adaptation, packaging, transportation, vibration and shock environments. In addition, they are also substantially in product classification, inspection rules, and product labeling, packaging, transportation, storage and accompanying documents The same, so this will be organically integrated standard scintillation detectors and scintillator together, integrated presentation of their contents, the name changed to "sodium iodide (Tl) scintillator and sodium iodide (Tl) scintillation detector. " To improve the standard of readability and operability, the present standards are technical requirements and test methods scintillator and scintillation detectors statements. This standard method of measuring performance characteristics of the main cited GB/T 13181-2002 "scintillator performance measurement methods" and GB 7270- 1987 "photomultiplier testing methods"; environmental conditions and test methods for products is taken from GB/T 10263-2006 "Radiation Detection Is Environmental conditions and testing procedures. " The other changes to the original standard criteria are. --- Range part of the increase, "This standard does not apply to the special requirements and special applications of sodium iodide (Tl) scintillator and sodium iodide (thallium) flash Shuo detector; " --- On the model name and used code names and symbols "sample" form; --- Simplified "crystal defects" requirements, modify the corresponding test methods and inspection rules; --- Adjustment, standardized grading and energy resolution, improves the accuracy of the energy resolution, in order to achieve international standards; --- General proposed test, in particular proposals for test equipment and radioactive sources requirements to the test of several sources; --- Standardized list of test items; --- Additions accompanying documents. Appendix A of this standard is informative annex, Annex B and Annex C is normative appendix. This standard by the National Nuclear Instrument Standardization Technical Committee. This standard by the Institute of Nuclear Industry Standardization. This standard was drafted. Nuclear Industry Standardization Institute, Beijing Nuclear Instrument Factory, Tsinghua University. Drafters of this standard. Xiongzheng Long, Ma Chaogui, Liyuan Jing, Xiao Chen. This standard was first published in 1991. NaI (Tl) scintillator and NaI (Tl) scintillation detector1 ScopeThis standard specifies the NaI (Tl) scintillator and sodium iodide (Tl) scintillation detector product classification, technical requirements, test methods, inspection Rules and signs, packaging, transportation, storage and accompanying documents. This standard applies to the measurement of X-rays and γ sodium iodide (Tl) scintillator and sodium iodide (Tl) scintillation detector. This standard does not apply to special requirements or special applications (such as for CT) of sodium iodide (Tl) scintillator and sodium iodide (Tl) scintillation probe Detector.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4960.6 nuclear science and technology terminology nuclear instrumentation GB/T 7270-1987 Test Method for photomultiplier tube (neqIEC 60306. 1969) GB/T 10257-2001 nuclear instruments and nuclear radiation detectors Quality inspection rule GB/T 10263-2006 nuclear radiation detectors Environmental conditions and testing procedures GB/T 13181-2002 scintillator Methods for measuring performance EJ/T 1059 nuclear equipment products packaging technology EJ/T 1061 nuclear radiation detector type designation3 Definitions and symbols3.1 Terms and Definitions GB/T 4960.6 and established the following terms and definitions apply to this standard. 3.1.1 In the ionizing radiation, the substance can emit light radiation and flashes. 3.1.2 By a number of scintillation material in some appropriate form consisting of ionizing radiation sensitive element. Organic and inorganic scintillators divided into two categories, there are forms of solids, liquids and gases. NOTE. In this standard, defined by the system flashes thallium-activated sodium iodide scintillator consisting of sodium iodide (Tl) scintillator. 3.1.3 Scintillator radiation at a measured easily through the part. 3.1.4 Scintillator allows optical radiation revealing part. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13182-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 13182-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13182-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13182-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13182-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13182-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
